M6NXU-T70-M2/Q [MSYSTEM]
Screw Terminal Ultra-Slim Signal Conditioners M6N Series;型号: | M6NXU-T70-M2/Q |
厂家: | M-SYSTEM |
描述: | Screw Terminal Ultra-Slim Signal Conditioners M6N Series |
文件: | 总6页 (文件大小:156K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M6NXU
T2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)
T3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)
T4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)
T5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)
T6: B (RH) (Usable range 100 to 1820°C, 212 to 3308°F)
T7: R (Usable range -50 to +1760°C, -58 to +3200°F)
T8: S (Usable range -50 to +1760°C, -58 to +3200°F)
TN: N (Usable range -270 to +1300°C, -454 to +2372°F)
T0: Specify (Please provide an emf table.)
RTD
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
UNIVERSAL TRANSMITTER
(PC programmable)
Functions & Features
• Universal input (mV, V, mA, T/C, RTD and potentiometer)
7.5-mm ultra-slim transmitter
• Low profile allows the M6N module mounted in a 120-mm
deep panel.
• PC programmable
(2- , 3- or 4-wire)
• High-density mounting
R1: JPt 100 (JIS'89)
• Power indicator LED
(Usable range: -200 to +500°C, -328 to +932°F)
R3: Pt 100 (JIS'89)
7.5 (.30)
(Usable range: -200 to +650°C, -328 to +1202°F)
R4: Pt 100 (JIS'97, IEC)
(Usable range: -200 to +850°C, -328 to +1562°F)
R5: Pt 50 Ω (JIS'81)
102
(4.02)
(Usable range: -200 to +649 °C, -328 to +1200°F)
R7: Pt 1000
(Usable range: -200 to +850°C, -328 to +1562°F)
R9: Cu 10 @25°C
102
(4.02)
(Usable range: -50 to +250°C, -58 to +482°F)
R0: Specify (Please provide a resistance table.)
Potentiometer
mm (inch)
M1: Total resistance 100 – 5000 Ω
(Configurator software is used to change input over the
described range of the selected suffix code.
For changing between suffix codes, set the Input Range
Selector on the side of unit before software adjustment.)
MODEL: M6NXU–[1][2]–[3][4]
ORDERING INFORMATION
• Code number: M6NXU-[1][2]-[3][4]
Specify a code from below for each [1] through [4].
(e.g. M6NXU-Z1Z1-M2/Q)
[2] OUTPUT
0: User-calibrated (Factory default: 4 – 20 mA DC)
Non-specified orders will be shipped as default factory
settings (M6NXU-00: 4 – 20 mA input/4 – 20 mA output).
• Input range (e.g. 4 – 20 mA DC)
If the unit is to be factory-calibrated to a specific
output type, please select from the following:
Current
• Output range (e.g. 4 – 20 mA DC)
• Specify the specification for option code /Q
(e.g. /C01)
Z1: Range 0 – 20 mA DC
Voltage
V2: Range -10 – +10 V DC
[1] INPUT
V3: Range -5 – +5 V DC
0: User-calibrated (Factory default: 4 – 20 mA DC)
(Configurator software is used to change output over the
described range of the selected suffix code.
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
If the unit is to be factory-calibrated to a specific
input type, please select from the following:
Current
Z1: Range 0 – 50 mA DC (Input resistance 17 Ω)
Voltage
[3] POWER INPUT
AC Power
S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)
S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)
Thermocouple
M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,
47 – 66 Hz)
DC Power
T1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)
M6NXU SPECIFICATIONS
ES-7925 Rev.5 Page 1/6
http://www.m-system.co.jp/
MODEL: M6NXU
R: 24 V DC
For detailed information, refer to the users manual for the
PC configurator.
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
[4] OPTIONS
blank: none
■Recommended solderless terminal (unit: mm (inch))
5.5 max.
(.22)
4 min.
(.16)
/Q: With options (specify the specification)
3.2 (.13) dia.
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
INPUT SPECIFICATIONS
■ DC Current: Input resistor incoporated
(If not specified, the input range is 4 – 20 mA DC.)
Input range: 0 – 50 mA DC
Minimum span: 2 mA
RELATED PRODUCTS
• PC configurator software (model: M6CFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
Offset: Lower range can be any specific value within the
input range provided that the minimum span is maintained.
■ DC Voltage
•Code S1 (narrow spans)
Input range: -1000 – +1000 mV DC
Minimum span: 100 mV
GENERAL SPECIFICATIONS
Connection
•Code S2 (wide spans)
Input and output: M3 screw terminal (torque 0.5 N·m)
Power input: Via the Installation Base (model: M6NBS) (not
available for AC power input)
Input range: -10 – +10 V DC
Minimum span: 1 V
Offset: Lower range can be any specific value within the
input range provided that the minimum span is maintained.
If not specified, the input range is shown below.
S1: 0 – 100 mV DC
or M3 screw terminal (torque 0.5 N·m)
Recommended solderless terminal: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
Applicable wire size: 0.2 – 2.5 mm
2
S2: 1 – 5 V DC
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
■ Thermocouple
Input resistance: ≥ 1 MΩ
Overrange output: -2 – +102 %
Burnout sensing: ≤ 3 μA
(Negative current output is not available.)
Minimum span: 20°C or 36°F
If not specified, the input range is shown below.
T1 PR: 0–1600°C
Zero adjustment: -2 to +2 % (PC programming)
Span adjustment: 98 to 102 % (PC programming)
Burnout (thermocouple, RTD & potentiometer input):
Upscale standard; downscale or no burnout
optional by programming
T2 K: 0–1000°C
T3 E: 0–500°C
T4 J: 0–500°C
Linearization (thermocouple & RTD input): Standard
Cold Junction Compensation (thermocouple input): CJC
sensor incorporated
T5 T: 0–300°C
T6 B: 500–1600°C
T7 R: 500–1600°C
Power LED: Green light turns on when the power is supplied.
Status indicator LED: Orange LED; Blinking patterns indicate
different operating status of the transmitter.
Programming: Downloaded from PC; input type and range,
output type and range, zero and span, burnout type,
linearization table, (max. 101 points, specified within -2 –
+102% for both input and output), user’s TC/RTD table
(max. 300 points, specified within -1000 to +1000 mV for
TC or 0 to 20 kΩ for RTD), etc.
T8 S: 0–1600°C
TN N: 0–1000°C
■ RTD: 2- , 3- or 4-wire RTD
Maximum leadwire resistance: 10 Ω per wire
Sensing current: ≤ 1.0 mA
Minimum span: 20°C or 36°F
Resistance range:
0 - 500 Ω (Input code: 1, 3, 4, 5, 9)
0 - 5 kΩ (Input code: 7)
M6NXU SPECIFICATIONS
ES-7925 Rev.5 Page 2/6
http://www.m-system.co.jp/
MODEL: M6NXU
If not specified, the input range is 100°C.
■ Potentiometer
PERFORMANCE in percentage of span
Cold junction compensation error (thermocouple input):
±3°C at 25 ±10°C
Sensing current: ≤ 1.0 mA
Minimum span
±5.4°F at 77 ±18°F
0 – 100 Ω : 10 Ω
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span
Response time: (0 – 90 %)
0 – 300 Ω : 30 Ω
0 – 600 Ω : 60 Ω
DC voltage or current: ≤ 0.5 s
0 – 1200 Ω : 120 Ω
Thermocouple, RTD, potentiometer: ≤ 1 s
Burnout response time (thermocouple, RTD, potentiometer
input): ≤ 10 s
0 – 2500 Ω : 250 Ω
0 – 5000 Ω : 500 Ω
If not specified, the input range is 0 – 1200 Ω.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
OUTPUT SPECIFICATIONS
■ DC Current
Output range: 0 – 20 mA DC
Conformance range: 0 – 20.4 mA DC
Minimum span: 1 mA
Accuracy
• DC voltage or current
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Accuracy: Input accuracy + output accuracy
Inversely proportional to the span.
Input accuracy: (% of range)
Load resistance: Output drive 11 V max.
(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])
If not specified, the output range is 4 – 20 mA DC.
■ DC Voltage
-1000 – +1000 mV : ±0.01 %
-10 – +10 V : ±0.01 %
0 – 50 mA : ±0.02 % (Except the accuracy of input resistor.)
Output accuracy: ±0.04% of max. output range
[Example] Input Type -10 – +10 V, Input Range 1 – 5 V,
Output Type -5 – +5 V, Output Range 1 – 5 V
Input accuracy = Max. Input Range (20 V) ÷ Span (4 V) ×
0.01 % = 0.05 %
Code V2 (wide spans)
Output range: -10 – +10 V DC
Conformance range: -10.4 – +10.4 V DC
Minimum span: 1 V
Code V3 (narrow spans)
Output accuracy = Max. Output Range (10 V) ÷ Span (4 V)
× 0.04 % = 0.1 %
Output range: -5 – +5 V DC
Conformance range: -5.2 – +5.2 V DC
Minimum span: 0.5 V
Accuracy= ±0.15 %
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
• Thermocouple
Overall accuracy: Input accuracy + output accuracy
Input accuracy: Accuracy + Cold Junction Compensation
Error 3°C (5.4°F)
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2: 0 – 10 V DC
Output accuracy: Max. Output Range ÷ Span × ±0.04%
T/C
(PR)
ACCURACY (°C)
±1.00
CONFORMANCE RANGE (°C)
0 – 1760
V3: 1 – 5 V DC
K (CA)
E (CRC)
J (IC)
T (CC)
B (RH)
R
±0.25
-150 – +1370
-170 – +1000
-180 – +1200
-170 – +400
400 – 1760
±0.20
INSTALLATION
Power Consumption
±0.25
±0.25
•AC: Max. 2 VA
±0.75
•DC: Approx. 0.5 W
±0.50
200 – 1760
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6NBS) or DIN rail
Weight: 65 g (2.3 oz)
S
±0.50
0 – 1760
N
±0.30
-130 – +1300
T/C
ACCURACY (°F)
±1.80
CONFORMANCE RANGE (°F)
32 – 3200
(PR)
K (CA)
±0.45
-238 – +2498
M6NXU SPECIFICATIONS
ES-7925 Rev.5 Page 3/6
http://www.m-system.co.jp/
MODEL: M6NXU
E (CRC)
J (IC)
T (CC)
B (RH)
R
±0.36
±0.45
±0.45
±1.35
±0.90
±0.90
±0.54
-274 – +1832
-292 – +2192
-274 – +752
752 – 3200
392 – 3200
32 – 3200
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
S
Low Voltage Directive
EN 61010-1
N
-202 – +2372
Installation Category II
Pollution Degree 2
[Example] K thermocouple, 0 – 1000°C, 4 – 20 mA DC
output
Input or output to power: Reinforced insulation (300 V)
Input to output: Basic insulation (300 V)
RoHS Directive
Absolute accuracy in °C: 0.25°C (see the above table)
CJC error (3°C) added: 3.25°C
➠ Input accuracy = 3.25°C ÷ 1000°C × 100 = 0.325 %
Output span: 16 mA (20 – 4)
EN 50581
➠ Output accuracy = 20 mA ÷ 16 mA × 0.04 = 0.05 %
➠ Overall accuracy including CJC error = 0.325 + 0.05 =
±0.38 % of span
• RTD
Accuracy: Input accuracy + output accuracy
Inversely proportional to the span.
Input accuracy: (whichever is greater)
±0.1 % of input range or ±0.15°C (Pt and JPt)
±1°C (Cu 10)
Output accuracy: ±0.04% of max. output range
[Example] Pt 100, 0 – 100°C, Output Type -5 – +5V, Output
Range 1 – 5V
Input Accuracy* (0.15°C**) ÷ Span (100°C) × 100 %
+ Max. Output Range (10V) ÷ Span (4V) × 0.04 %
= ±0.25 %
* Calculate the accuracy in °C.
** 100°C × 0.1 % = 0.1°C ≤ 0.15°C. 0.15°C is used as input
accuracy value.
• Potentiometer
Accuracy: Input accuracy + output accuracy
Inversely proportional to the span.
Input accuracy: (% of range)
0 – 100 Ω : ±0.05 %
0 – 300 Ω : ±0.05 %
0 – 600 Ω : ±0.03 %
0 – 1200 Ω : ±0.03 %
0 – 2500 Ω : ±0.01 %
0 – 5000 Ω : ±0.01 %
Output accuracy: ±0.04% of max. output range
[Example] Total Resistance 0 – 1200 Ω, Input Range 250–
750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V
Max. Input Range (1200 Ω) ÷ Span (500 Ω) × 0.03 %
+ Max. Output Range (10 V) ÷ Span (4 V) × 0.04 %
= ±0.18 %
M6NXU SPECIFICATIONS
ES-7925 Rev.5 Page 4/6
http://www.m-system.co.jp/
MODEL: M6NXU
EXTERNAL VIEW
■ FRONT VIEW (with the cover open)
DIP switches for configuration
■ SIDE VIEW
5
6
7
8
Power LED
Status Indicator LED
Configurator Jack
1
2
3
4
The DIP switch setting is required to select input and output
types before setting a precise range using PC Configurator
Software (model: M6CFG).
Refer to the instruction manual for detailed procedures.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCREWDRIVER
INSERTION ANGLE
: approx. 55°
*
WIRE INSERTION ANGLE
: approx. 35°
8–M3
SCREW TERMINAL
DIN RAIL HOOK
5
6
7
8
DIN RAIL
35mm wide
1
2
3
4
[1 (.04)]
SCREWDRIVER
INSERTION ANGLE
: approx. 40°
7.5 (.30)
102 (4.02)
*Screwdriver stem diameter: 6 mm (.24”) or less
• When mounting, no extra space is needed between units.
M6NXU SPECIFICATIONS
ES-7925 Rev.5 Page 5/6
http://www.m-system.co.jp/
MODEL: M6NXU
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
*2
T/C
DC
RTD
POT.
DIP SW
DIP SW
CJC
SENSOR
STATUS LED
comp. leadwire
Isolation
Output
Driver
3-wire
A
4-wire
A
2-wire
A
+
+
+
+
max.
*1
Digital
Computation
1
2
3
4
5
6
+
–
3
Current Input (Z1)
–
OUTPUT
POWER
–
–
–
A
B
B
2
B
Low Drift
Amplifier
17Ω
Voltage Input (S1, S2)
+
POWER LED
7
8
U (+)
V (–)
B
B
1
–
min.
JACK
CONFIGURATOR
*3
POWER
*1. Input shunt resistor incorporated for current input.
*2. CJC sensor incorporated for thermocouple input.
*3. Available only for DC power input type
Specifications are subject to change without notice.
M6NXU SPECIFICATIONS
ES-7925 Rev.5 Page 6/6
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明