M6NXT-5Z1-R/Q
更新时间:2024-09-18 23:15:56
品牌:MSYSTEM
描述:Screw Terminal Ultra-Slim Signal Conditioners M6N Series
M6NXT-5Z1-R/Q 概述
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
M6NXT-5Z1-R/Q 数据手册
通过下载M6NXT-5Z1-R/Q数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: M6NXT
(Configurator software is used to change the input type and
precise range.)
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
THERMOCOUPLE TRANSMITTER
(PC programmable)
[2] OUTPUT
Current
Functions & Features
Z1: Range 0 – 20 mA DC
• 7.5-mm wide ultra-slim design
• Low profile allows the M6N module mounted in a 120-mm
deep panel
Voltage
V2: Range -10 – +10 V DC
V3: Range -5 – +5 V DC
• Accepts a thermocouple input and provides an isolated,
linearized DC signal
(Configurator software is used to change output over the
described range of the selected suffix code.
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
• Cold junction compensation, linearization and burnout
protection
• PC programmable
• High-density mounting
• Power indicator LED
POWER INPUT
DC Power
7.5 (.30)
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
102
(4.02)
[3] OPTIONS (multiple selections)
Standards & Approvals
blank: CE marking
/UL: UL approval, CE marking
Other Options
102
(4.02)
blank: none
mm (inch)
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODEL: M6NXT–[1][2]–R[3]
ORDERING INFORMATION
• Code number: M6NXT-[1][2]-R[3]
Specify a code from below for each [1] through [3].
(e.g. M6NXT-2Z1-R/UL/Q)
/C02: Polyurethane coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-7831)
• Temperature range (e.g. 0 – 1000°C)
• Output range (e.g. 4 – 20mA DC)
• Specify the specification for option code /Q
(e.g. /C01/SET)
RELATED PRODUCTS
• PC configurator software (model: M6CFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
[1] INPUT THERMOCOUPLE
1: (PR)
2: K (CA)
3: E (CRC)
4: J (IC)
GENERAL SPECIFICATIONS
Connection
5: T (CC)
6: B (RH)
Input and output: M3 screw terminal (torque 0.5 N·m)
Power input: Via the Installation Base (model: M6NBS)
or M3 screw terminal (torque 0.5 N·m)
Recommended solderless terminal: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
7: R
8: S
N: N
0: Specify (Please provide a emf table.)
M6NXT SPECIFICATIONS
ES-7911 Rev.10 Page 1/5
http://www.m-system.co.jp/
MODEL: M6NXT
Applicable wire size: 0.2 – 2.5 mm
2
Minimum span: 1 mA
Screw terminal: Nickel-plated steel
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Overrange output: -2 – +102 %
Load resistance: Output drive 11 V max.
(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])
If not specified, the output range is 4 – 20 mA DC.
■ DC Voltage
(Negative current output is not available.)
Zero adjustment: -2 to +2 % (PC programming)
Span adjustment: 98 to 102 % (PC programming)
Burnout: Upscale standard; downscale or no burnout
optional by programming
Code V2 (wide spans)
Output range: -10 – +10 V DC
Conformance range: -10.4 – +10.4 V DC
Minimum span: 1 V
Linearization: Standard
Cold Junction Compensation: CJC sensor incorporated
Power LED: Green light turns on when the power is supplied.
Status indicator LED: Orange LED; Blinking patterns indicate
different operating status of the transmitter.
Programming: Downloaded from PC; input type and range,
output type and range, zero and span, burnout type, user’s
linearization table, temperature unit, cold junction
compensation, response characteristics (version 1.30 or
later), cold junction compensation, filter time constant, etc.
For detailed information, refer to the users manual for the
PC configurator.
Code V3 (narrow spans)
Output range: -5 – +5 V DC
Conformance range: -5.2 – +5.2 V DC
Minimum span: 0.5 V
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2: 0 – 10 V DC
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
V3: 1 – 5 V DC
■Recommended solderless terminal (unit: mm (inch))
5.5 max.
(.22)
4 min.
(.16)
INSTALLATION
Power consumption: Approx. 0.5 W
3.2 (.13) dia.
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6NBS) or DIN rail
Weight: 65 g (2.3 oz)
INPUT SPECIFICATIONS
Input resistance: 1 MΩ min.
Burnout sensing: ≤ 0.2 μA
Temperature range: See Table 1.
If not specified, the input range is shown below.
1 PR: 0 – 1600°C
PERFORMANCE
Overall accuracy: Input accuracy + output accuracy
• Input accuracy: Accuracy (Table 1) + Cold Junction
Compensation Error 3°C (5.4°F)
• Output accuracy: Max. Output Range ÷ Span × ±0.04%
Cold junction compensation error:
2 K: 0 – 1000°C
±3°C at 25 ±10°C
3 E: 0 – 500°C
±5.4°F at 77 ±18°F
4 J: 0 – 500°C
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span
Response time: ≤ 0.5 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
5 T: 0 – 300°C
6 B: 500 – 1600°C
7 R: 500 – 1600°C
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
8 S: 0 – 1600°C
N N: 0 – 1000°C
OUTPUT SPECIFICATIONS
■ DC Current
Output range: 0 – 20 mA DC
Conformance range: 0 – 20.4 mA DC
M6NXT SPECIFICATIONS
ES-7911 Rev.10 Page 2/5
http://www.m-system.co.jp/
MODEL: M6NXT
CALCULATION EXAMPLES OF OVERALL ACCURACY
[Example] K thermocouple, 0 – 1000°C, 4 – 20 mA DC
output
Absolute value accuracy (Table 1): 0.25°C
CJC error (3°C) added: 3.25°C
• Input accuracy = 3.25°C ÷ 1000°C × 100 = 0.325 %
Output span: 16 mA (20 – 4)
• Output accuracy = 20 mA ÷ 16 mA × 0.04 = 0.05 %
Overall accucracy including CJC error = 0.325 + 0.05 =
±0.38 % of span
Table 1.
C
THERMOCOUPLE
MIN.
MAXIMUM
RANGE
CONFORMANCE
RANGE
ACCURACY
SPAN
(PR)
K (CA)
E (CRC)
J (IC)
T (CC)
B (RH)
R
20
20
20
20
20
20
20
20
20
0 to 1760
0 to 1760
1.00
0.25
0.20
0.25
0.25
0.75
0.50
0.50
0.30
-270 to +1370 -150 to +1370
-270 to +1000 -170 to +1000
-210 to +1200 -180 to +1200
-270 to +400 -170 to +400
100 to 1820 400 to 1760
-50 to +1760 200 to 1760
S
-50 to +1760
0 to 1760
N
-270 to +1300 -130 to +1300
F
THERMOCOUPLE
MIN.
MAXIMUM
RANGE
CONFORMANCE
RANGE
ACCURACY
SPAN
(PR)
K (CA)
E (CRC)
J (IC)
T (CC)
B (RH)
R
36
36
36
36
36
36
36
36
36
32 to 3200
32 to 3200
1.80
0.45
0.36
0.45
0.45
1.35
0.90
0.90
0.54
-454 to +2498 -238 to +2498
-454 to +1832 -274 to +1832
-346 to +2192 -292 to +2192
-454 to +752 -274 to +752
212 to 3308 752 to 3200
-58 to +3200 392 to 3200
S
-58 to +3200
32 to 3200
N
-454 to +2372 -202 to +2372
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
M6NXT SPECIFICATIONS
ES-7911 Rev.10 Page 3/5
http://www.m-system.co.jp/
MODEL: M6NXT
EXTERNAL VIEW
FRONT VIEW (with the cover open)
SIDE VIEW
5
6
7
8
Power LED
Status Indicator LED
Configurator Jack
Output Range Selectors
1
2
3
4
The DIP switch setting is required to select output types
before setting a precise output range using PC Configurator
Software (model: M6CFG).
Refer to the instruction manual for detailed procedures.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCREWDRIVER
INSERTION ANGLE
: approx. 55°
*
WIRE INSERTION ANGLE
: approx. 35°
8–M3
SCREW TERMINAL
DIN RAIL HOOK
5
6
7
8
DIN RAIL
35mm wide
1
2
3
4
[1 (.04)]
SCREWDRIVER
INSERTION ANGLE
: approx. 40°
7.5 (.30)
102 (4.02)
*Screwdriver stem diameter: 6 mm (.24”) or less
• When mounting, no extra space is needed between units.
M6NXT SPECIFICATIONS
ES-7911 Rev.10 Page 4/5
http://www.m-system.co.jp/
MODEL: M6NXT
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
CJC
SENSOR
STATUS IND. LED
comp. leadwire
DIP SW
Isolation
T/C
+
–
Digital
Computation
Output
Driver
+
–
+
–
1
5
6
Low Drift
Amplifier
OUTPUT
POWER
2
POWER LED
3
+
–
7
8
4
CONFIGURATOR
JACK
POWER
Specifications are subject to change without notice.
M6NXT SPECIFICATIONS
ES-7911 Rev.10 Page 5/5
http://www.m-system.co.jp/
M6NXT-5Z1-R/Q 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
M6NXT-5Z1-R/UL | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6V2-R | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6V2-R/Q | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6V2-R/UL | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6V3-R | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6V3-R/Q | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6V3-R/UL | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6Z1-R | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6Z1-R/Q | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 | |
M6NXT-6Z1-R/UL | MSYSTEM | Screw Terminal Ultra-Slim Signal Conditioners M6N Series | 获取价格 |
M6NXT-5Z1-R/Q 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6