M6NPP-A1NN-R [MSYSTEM]
Screw Terminal Ultra-Slim Signal Conditioners M6N Series;型号: | M6NPP-A1NN-R |
厂家: | M-SYSTEM |
描述: | Screw Terminal Ultra-Slim Signal Conditioners M6N Series |
文件: | 总5页 (文件大小:148K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M6NPP
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
[3] OUTPUT LOGIC
N: The same as the input
R: Inverted
PULSE ISOLATOR
Functions & Features
• 7.5-mm wide ultra-slim design
• Low profile allows the M6N module mounted in a 120-mm
deep panel
POWER INPUT
DC Power
R: 24 V DC
• Galvanically isolates pulse rate signals
• High-density mounting
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• Power indicator and input monitor LED
[4] OPTIONS
blank: none
Typical Applications
/Q: With options (specify the specification)
• Isolating field pulse signals in order to reduce noises
• Changing e.g. dry contact signal to e.g. 5 V signals
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
7.5 (.30)
/C02: Polyurethane coating
102
(4.02)
GENERAL SPECIFICATIONS
Connection
Input and output: M3 screw terminal (torque 0.5 N·m)
Power input: Via the Installation Base (model: M6NBS)
or M3 screw terminal (torque 0.5 N·m)
Recommended solderless terminal: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
102
(4.02)
mm (inch)
Applicable wire size: 0.2 – 2.5 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
MODEL: M6NPP–[1][2][3]–R[4]
Chattering protection: Filter provided for mechanical
contact input
ORDERING INFORMATION
• Code number: M6NPP-[1][2][3]-R[4]
Specify a code from below for each [1] through [4].
(e.g. M6NPP-CMN-R/Q)
Power LED: Green light turns on when the power is supplied.
Input monitor LED
Open collector, Mechanical contact: Orange LED turns
on when the input is ON.
• Specify the specification for option code /Q
(e.g. /C01)
Voltage pulse, 2-wire current pulse: Orange LED turns
on when the input is high.
Input pulse sensing: DC coupled
[1] INPUT
A1: Open collector
■Recommended solderless terminal (unit: mm (inch))
A2: Mechanical contact
C: 5 V pulse (sensitivity 2 V)
D: 12 V/24 V pulse (sensitivity 5 V)
H: Two-wire current pulse
5.5 max.
(.22)
4 min.
(.16)
3.2 (.13) dia.
[2] OUTPUT
A1: High frequency open collector (max. 100 kHz)
A2: Low frequency open collector (max. 30 Hz)
M: 5 V pulse
INPUT SPECIFICATIONS
Excitation: 12 V DC @20 mA, shortcircuit protection
■ Open Collector
N: 12 V pulse
Maximum frequency: 100 kHz
P: 24 V pulse
Pulse width time requirement: ≥ 5 μsec. for ON and OFF
M6NPP SPECIFICATIONS
ES-7919 Rev.6 Page 1/5
http://www.m-system.co.jp/
MODEL: M6NPP
Sensing: Approx. 11 V DC @2.4 mA
Detecting levels: ≤ 1.8 kΩ/3 V for ON, ≥ 4 kΩ/5 V for OFF
■ Mechanical Contact
Mounting: Installation Base (model: M6NBS) or DIN rail
Weight: 60 g (2.1 oz)
Maximum frequency: 30 Hz
PERFORMANCE
Pulse width time requirement: ≥ 10 msec. for ON and OFF
Sensing: Approx. 11 V DC @2.4 mA
Detecting levels: ≤ 1.8 kΩ/3 V for ON, ≥ 4 kΩ/5 V for OFF
■ Voltage Pulse
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
Maximum frequency: 100 kHz
Pulse width time requirement: ≥ 5 μsec. for high and low
levels
STANDARDS & APPROVALS
EU conformity:
EMC Directive
Waveform: Square or sine
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
Input impedance: ≥ 10 kΩ
Max. voltage between input terminals: 50 V
Detecting H level
EN 50581
5 V pulse: ≥ 3 V
12 V, 24 V pulse: ≥ 6 V
Detecting L level
5 V pulse: ≤ 1 V
12 V, 24 V pulse: ≤ 4 V
■ Two-wire Current Pulse
Max. frequency: 100 kHz
Input resistance: Receiving resistor 200 Ω
Input range: 0 – 25 mA
Detecting levels: ≤ 5 mA for Lo, ≥ 15 mA for Hi
OUTPUT SPECIFICATIONS
■ High Frequency Open Collector:
50 V DC @100 mA (resistive load)
Maximum frequency: 100 kHz
Saturation voltage: 0.5 V DC
■ Low Frequency Open Collector:
50 V DC @100 mA (resistive load)
Maximum frequency: 30 Hz
Timer: Limits ≥ 75 msec. within 75 ±25 msec.
ON time for output logic non-inverted
OFF time for output logic inverted
Saturation voltage: 0.5 V DC
■ Voltage Pulse
Maximum frequency: 100 kHz
High level: Rating (5, 12 or 24 V) ±10 %
Low level: ≤ 0.5 V
Load resistance:
≥ 1.0 kΩ for 5 V
≥ 2.4 kΩ for 12 V
≥ 4.8 kΩ for 24 V
INSTALLATION
Power consumption: Approx. 1 W
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
M6NPP SPECIFICATIONS
ES-7919 Rev.6 Page 2/5
http://www.m-system.co.jp/
MODEL: M6NPP
EXTERNAL VIEW
(With the cover open)
Power LED
Input Monitor LED
OUTPUT LOGIC
VOLTAGE PULSE
OUTPUT
OPEN COLLECTOR
OUTPUT
INPUT TYPE
PULSE LOGIC
Non Inverted
INPUT
H
H
OFF
L
L
ON
Voltage Pulse Input
2-wire Current Pulse
Input
H
H
OFF
Inverted
Non Inverted
Inverted
L
L
ON
OFF
H
OFF
ON
L
ON
Mechanical Contact Input
Open Collector Input
OFF
H
OFF
ON
L
ON
M6NPP SPECIFICATIONS
ES-7919 Rev.6 Page 3/5
http://www.m-system.co.jp/
MODEL: M6NPP
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCREWDRIVER
INSERTION ANGLE
: approx. 55°
*
WIRE INSERTION ANGLE
: approx. 35°
8–M3
SCREW TERMINAL
DIN RAIL HOOK
5
6
7
8
DIN RAIL
35mm wide
1
2
3
4
[1 (.04)]
SCREWDRIVER
INSERTION ANGLE
: approx. 40°
7.5 (.30)
102 (4.02)
*Screwdriver stem diameter: 6 mm (.24”) or less
• When mounting, no extra space is needed between units.
M6NPP SPECIFICATIONS
ES-7919 Rev.6 Page 4/5
http://www.m-system.co.jp/
MODEL: M6NPP
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
INPUT MONITOR LED
Isolation
*
Waveform
Shaper
Output
Driver
+
–
1
2
3
4
5
6
7
8
+
–
+
–
Timer
INPUT
OUTPUT
SENSOR EXCITATION
+
POWER
LED
12 V Supply
POWER
POWER
* Low freq. open collector output only.
Input Connection Examples
Output Connection Examples
■ Mechanical Contact or Open Collector
■ Open Collector
■ 2-Wire Current Pulse
• Built-in Excitation
+
–
–
+
+
–
+
1
2
3
+
–
+
–
5
6
200 Ω
–
+
1
2
3
2-WIRE
PICK-UP
+12V
PWR
+12V
5 kΩ
■ Voltage Pulse
■ Voltage Pulse
5
6
+
–
+
–
• External DC Supply
+
–
–
+
+
–
+
1
2
3
200 Ω
–
+
1
2
3
2-WIRE
PICK-UP
+12V
PWR
+
+
–
+12V
DC SUPPLY
Specifications are subject to change without notice.
M6NPP SPECIFICATIONS
ES-7919 Rev.6 Page 5/5
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明