M6NDY-5-R [MSYSTEM]
Screw Terminal Ultra-Slim Signal Conditioners M6N Series;型号: | M6NDY-5-R |
厂家: | M-SYSTEM |
描述: | Screw Terminal Ultra-Slim Signal Conditioners M6N Series |
文件: | 总4页 (文件大小:138K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M6NDY
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
[2] OPTIONS (multiple selections)
Standards & Approvals
CURRENT LOOP SUPPLY
Functions & Features
blank: CE marking
• 7.5-mm wide ultra-slim design
• Low profile allows the M6N module mounted in a 120-mm
deep panel
/UL: UL approval, CE marking
Other Options
blank: none
• Powers a two-wire transmitter and galvanically isolates its
output signal
/Q: Option other than the above (specify the specification)
• High-density mounting
• Power indicator LED
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
7.5 (.30)
/C02: Polyurethane coating
GENERAL SPECIFICATIONS
Connection
102
(4.02)
Input and output: M3 screw terminal (torque 0.5 N·m)
Power input: Via the Installation Base (model: M6NBS)
or M3 screw terminal (torque 0.5 N·m)
Recommended solderless terminal: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
102
(4.02)
mm (inch)
Applicable wire size: 0.2 – 2.5 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
MODEL: M6NDY–[1]–R[2]
Zero adjustment: -2 to +2 % (front)
Span adjustment: 98 to 102 % (front)
Power LED: Green light turns on when the power is supplied.
■Recommended solderless terminal (unit: mm (inch))
ORDERING INFORMATION
• Code number: M6NDY-[1]-R[2]
Specify a code from below for each [1] and [2].
(e.g. M6NDY-A-R/UL/Q)
5.5 max.
(.22)
4 min.
(.16)
3.2 (.13) dia.
• Specify the specification for option code /Q
(e.g. /C01)
INPUT
Current
SUPPLY OUTPUT
(across the terminals 3 – 4)
4 – 20 mA DC (Input resistance 249.5 Ω)
Output voltage: 24 – 30 V DC with no load
18 V DC min. at 20 mA
[1] OUTPUT
Current
Current rating: ≤ 22 mA DC
• Shortcircuit Protection
A: 4 – 20 mA DC (Load resistance 550 Ω max.)
Voltage
Current limited: 45 mA max.
Protected time duration: No limit
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
POWER INPUT
DC Power
R: 24 V DC
M6NDY SPECIFICATIONS
ES-7903 Rev.8 Page 1/4
http://www.m-system.co.jp/
MODEL: M6NDY
INSTALLATION
Power consumption: Approx. 1 W (1.1 W for UL approval)
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6NBS) or DIN rail
Weight: 60 g (2.1 oz)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)
Response time: ≤ 100 msec. (0 – 90 %)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D hazardous locations
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
EXTERNAL VIEW
(With the cover open)
Power LED
Zero Adj.
Span Adj.
M6NDY SPECIFICATIONS
ES-7903 Rev.8 Page 2/4
http://www.m-system.co.jp/
MODEL: M6NDY
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCREWDRIVER
INSERTION ANGLE
: approx. 55°
*
WIRE INSERTION ANGLE
: approx. 35°
8–M3
SCREW TERMINAL
DIN RAIL HOOK
5
6
7
8
DIN RAIL
35mm wide
1
2
3
4
[1 (.04)]
SCREWDRIVER
INSERTION ANGLE
: approx. 40°
7.5 (.30)
102 (4.02)
*Screwdriver stem diameter: 6 mm (.24”) or less
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
2-WIRE
TRANSMITTER
Shortcircuit
Portection
24 V DC
Supply
+
–
+
–
+
–
+
–
3
4
1
2
Z
S
Isolation
Low Drift
Amplifier
Output
Driver
5
6
+
–
MONITOR
OUTPUT
POWER
V
249.5 Ω
POWER LED
7
8
+
–
POWER
■ When Used as DC Supply
■ When Used as Isolator
+
–
+
–
+
–
3
4
1
2
+
–
+
–
3
4
1
2
2-WIRE
TRANSMITTER
INPUT
249.5 Ω
249.5 Ω
M6NDY SPECIFICATIONS
ES-7903 Rev.8 Page 3/4
http://www.m-system.co.jp/
MODEL: M6NDY
Specifications are subject to change without notice.
M6NDY SPECIFICATIONS
ES-7903 Rev.8 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明