M6NBS-08P/UL [MSYSTEM]
Screw Terminal Ultra-Slim Signal Conditioners M6N Series;型号: | M6NBS-08P/UL |
厂家: | M-SYSTEM |
描述: | Screw Terminal Ultra-Slim Signal Conditioners M6N Series |
文件: | 总5页 (文件大小:271K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M6NBS
Screw Terminal Ultra-Slim Signal Conditioners M6N Series
RELATED PRODUCTS
• M6N series signal conditioners (Not able to supply to AC
power signal conditioners (M2 code))
INSTALLATION BASE
Functions & Features
• Power supply module (model: M6NPS1)
• Power supply module (model: M6NPS2)
• Power supply module (model: M6-PSM)
• Blank filler module (model: M6NDM)
• Backplane to collectively supply power to the M6N
modules in combination with the Power Supply Module
(model: M6NPSx or M6-PSM)
GENERAL SPECIFICATIONS
Capacity: Up to 48 modules (including power supply
module) with Extension Bases (The usable number of signal
conditioners depends on the capacity of the power supply
module. Refer to the M6-PSM specification sheets.)
Isolation: Power to ground
INSTALLATION
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
MODEL: M6NBS–[1][2]
Weight:
M6NBS-08, -08P: 50 g (1.8 oz) without signal conditioners
M6NBS-08A: 80 g (2.8 oz) without signal conditioners
ORDERING INFORMATION
• Code number: M6NBS-[1][2]
Specify a code from below for each [1] and [2].
(e.g. M6NBS-08/UL/Q)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
• Specify the specification for option code /Q
(e.g. /C01)
Dielectric strength: 2000 V AC @1 minute (power to ground)
[1] NUMBER OF SLOTS
08: 8 slots
STANDARDS & APPROVALS
EU conformity:
08P: 8 slots (for extension)
08A: 8 slots + power supply slot (for model M6-PSM)
(UL not available)
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
[2] OPTIONS (multiple selections)
Standards & Approvals
Approval:
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
blank: CE marking
/UL: UL approval, CE marking
Other Options
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
M6NBS SPECIFICATIONS
ES-7915 Rev.10 Page 1/5
http://www.m-system.co.jp/
MODEL: M6NBS
EXTERNAL VIEW
Install signal conditioners from the slot at either end.
Power Supply Modules (M6NPS1 or M6NPS2) could be mounted at any slots, however,
installing them at either end is generally recommended.
Mount the power supply module (M6-PSM) on the power module slot of M6NBS-08A.
■ M6NBS-08, M6NBS-08P
■ M6NBS-08A
Signal
Conditioner
Signal Conditioner or
Power Supply Module
Power Supply
Module
1 2 • • • • • •
8
1 2 • • • • • •
8
M6NBS SPECIFICATIONS
ES-7915 Rev.10 Page 2/5
http://www.m-system.co.jp/
MODEL: M6NBS
EXTERNAL DIMENSIONS unit: mm (inch)
■ M6NBS-08, M6NBS-08P
27 (1.06)
[5 (.20)]
11.5 (.45)
[3 (.12)]
3–4.5 (.18) dia.
61.6 (2.43)
MTG HOLE
2 (.08) deep
DIN RAIL
35mm wide
22.5 (.89)
116 (4.57)
49.8 (1.96)
■ M6NBS-08A
3 (.12)
85 (3.35)
[3 (.12)]
[5 (.20)]
27 (1.06)
3–4.5 (.18) dia.
MTG HOLE
30.8 (1.21)
2 (.08) deep
DIN RAIL
35mm wide
49.8 (1.96)
22.5 (.89)
116 (4.57)
M6NBS SPECIFICATIONS
ES-7915 Rev.10 Page 3/5
http://www.m-system.co.jp/
MODEL: M6NBS
MOUNTING REQUIREMENTS unit: mm (inch)
■ MOUNTING DIRECTION
The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise,
may shorten the product’s life expectation or deteriorate its performance.
Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)
M6NBS
10
10
(.39)
(.39)
Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.)
■ SURFACE MOUNTING
• M6NBS-08
• M6NBS-08A
30.8
(1.21)
3-M4
3-M4
49.8 (1.96)
49.8 (1.96)
• M6NBS-08 + M6NBS-08P
• M6NBS-08A + M6NBS-08P
30.8
(1.21)
1
*
1
n-M4
n-M4
*
49.8 (1.96) 11.8 49.8 (1.96)
(.46)
49.8 (1.96)
49.8 (1.96)
11.8 (.46)
*1. n = (Number of bases) x 3
M6NBS SPECIFICATIONS
ES-7915 Rev.10 Page 4/5
http://www.m-system.co.jp/
MODEL: M6NBS
Specifications are subject to change without notice.
M6NBS SPECIFICATIONS
ES-7915 Rev.10 Page 5/5
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明