M6DXF2-Z1Z1V3-R [MSYSTEM]
Euro Terminal Ultra-Slim Signal Conditioners M6D Series;型号: | M6DXF2-Z1Z1V3-R |
厂家: | M-SYSTEM |
描述: | Euro Terminal Ultra-Slim Signal Conditioners M6D Series |
文件: | 总5页 (文件大小:146K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M6DXF2
precise range.)
Euro Terminal Ultra-Slim Signal Conditioners M6D Series
[3] OUTPUT
Current
2-INPUT MATH FUNCTION MODULE
(PC programmable)
Z1: Range 0 – 20 mA DC
Voltage
Functions & Features
• 5.9-mm wide ultra-slim design
• Low profile allows the M6D module mounted in a 120-mm
deep panel
V2: Range -10 – +10 V DC
V3: Range -5 – +5 V DC
(Configurator software is used to change the output type
and precise range.)
• 2-input math functions and signal selector functions
• PC programmable
• High-density mounting
• Power indicator LED
POWER INPUT
DC Power
5.9 (.23)
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
94
(3.70)
[4] OPTIONS
blank: none
/Q: With options (specify the specification)
102
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
(4.02)
mm (inch)
/C02: Polyurethane coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-7848)
MODEL: M6DXF2-[1][2][3]-R[4]
ORDERING INFORMATION
• Code number: M6DXF2-[1][2][3]-R[4]
Specify a code from below for each [1] through [4].
(e.g. M6DXF2-S2Z1Z1-R/Q)
FUNCTIONS
PC Configurator Software is used to change function type.
Math Functions:
Temperature compensation (w/o square root extraction)
Temperature compensation (with square root extraction)
Pressure compensation (w/o square root extraction)
Pressure compensation (with square root extraction)
Addition / Subtraction
• Input 1 range (e.g. 1 – 5 V DC)
• Input 2 range (e.g. 4 – 20 mA DC)
• Output range (e.g. 4 – 20 mA DC)
• Specify the specification for option code /Q
(e.g. /C01/SET)
Multiplication
Division
[1] INPUT 1
Current
Signal Selector Functions:
High selector
Z1: Range 0 – 50 mA DC (Input resistance 24.9 Ω)
Voltage
Low selector
S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)
S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)
(Configurator software is used to change the input type and
precise range.)
RELATED PRODUCTS
• PC configurator software (model: M6CFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
[2] INPUT 2
Same range availability as Input 1
(Configurator software is used to change the input type and
M6DXF2 SPECIFICATIONS
ES-7848 Rev.6 Page 1/5
http://www.m-system.co.jp/
MODEL: M6DXF2
output range provided that the minimum span is
GENERAL SPECIFICATIONS
Connection
maintained.
Load resistance: Output drive 11 V max.
(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])
If not specified, the output range is 4 – 20 mA DC.
■ DC Voltage
Input and output: Euro terminal (torque 0.3 N·m)
Power input: Via the Installation Base (model: M6DBS)
or Euro terminal (torque 0.3 N·m)
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
Code V2 (wide spans)
Housing material: Flame-resistant resin (black)
Isolation: Input 1 or input 2 to output to power
(Negative sides of the input 1 and 2 must be of the same
potential.)
Output range: -10 – +10 V DC
Conformance range: -10.4 – +10.4 V DC
Minimum span: 1 V
Code V3 (narrow spans)
Overrange output: -2 – +102 %
Output range: -5 – +5 V DC
(Negative current output is not available.)
Zero adjustment: -2 to +2 % (PC programming)
Span adjustment: 98 to 102 % (PC programming)
Power LED: Green light turns on when the power is supplied.
Status indicator LED: Orange LED; Blinking patterns indicate
different operating status of the transmitter.
Programming: Downloaded from PC; input type and range,
output type and range, zero and span, function type and
parameters, etc.
Conformance range: -5.2 – +5.2 V DC
Minimum span: 0.5 V
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2: 0 – 10 V DC
For detailed information, refer to the users manual for the
PC configurator.
V3: 1 – 5 V DC
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
INSTALLATION
Power consumption: Approx. 0.5 W
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Installation Base (model: M6DBS) or DIN rail
Weight: 65 g (2.3 oz)
INPUT SPECIFICATIONS
■ DC Current: Input resistor incoporated
(If not specified, the input range is 4 – 20 mA DC.)
Input range: 0 – 50 mA DC
Minimum span: 2 mA
Offset: Lower range can be any specific value within the
input range provided that the minimum span is maintained.
■ DC Voltage
PERFORMANCE in percentage of span
Overall accuracy: Input accuracy + output accuracy
See CALCULATION EXAMPLES OF OVERALL ACURACY
• Input accuracy*: (% of max. input range)
-1000 – +1000 mV : ±0.05 %
•Code S1 (narrow spans)
Input range: -1000 – +1000 mV DC
Minimum span: 100 mV
-10 – +10 V : ±0.05 %
•Code S2 (wide spans)
0 – 50 mA : ±0.1 %
Input range: -10 – +10 V DC
• Output accuracy**: ±0.04% of max. output range
Minimum span: 1 V
Offset: Lower range can be any specific value within the
input range provided that the minimum span is maintained.
If not specified, the input range is shown below.
S1: 0 – 100 mV DC
*Inversely proportional to the span.
For math functions, the input accuracy equals that of either
input 1 or 2, whichever is greater, with the following
parameter setting:
S2: 1 – 5 V DC
K1
=K2=1, A2=0%, X2=100% for temp./press. compensation
K0
=0.5, K
1
=K
2
=1, A
0
=A =A =0% for four arithmetic functions
1
2
For selector functions, it equals that of the selected signal.
**Inversely proportional to the span.
OUTPUT SPECIFICATIONS
■ DC Current
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span
Response time: ≤ 0.5 sec. (0 – 90 %)
Output range: 0 – 20 mA DC
Conformance range: 0 – 20.4 mA DC
Minimum span: 1 mA
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Offset: Lower range can be any specific value within the
M6DXF2 SPECIFICATIONS
ES-7848 Rev.6 Page 2/5
http://www.m-system.co.jp/
MODEL: M6DXF2
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
CALCULATION EXAMPLES OF OVERALL ACCURACY
[Example] Function: Temperature compensation w/o square
root extraction; K
1
=K
2
=1, A
2
=0%, X =100%
2
Input 1: Type -10 – +10 V / range 1 – 5 V
Input 2: Type 0 – 50 mA / range 4 – 20 mA
Output: Type 0 – 20 mA / range 4 – 20 mA
Input 1 = Max. Input Range (20 V) ÷ Span (4 V) × 0.05% =
0.25%
Input 2 = Max. Input Range (50 mA) ÷ Span (16 mA) ×
0.1% = 0.31%
Output = Max. Output Range (20 mA) ÷ Span (16 mA) ×
0.04% = 0.05%
Accuracy = 0.31% (input 2 > input 1) + 0.05% = 0.36%
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
EXTERNAL VIEW
FRONT VIEW (with the cover open)
SIDE VIEW
Output Range Selectors
5
6
7
8
Power LED
Status Indicator LED
Configurator Jack
Input Range Selectors
1
2
3
4
The DIP switch setting is required to select input and output
types before setting a precise range using PC Configurator
Software (model: M6CFG).
Refer to the instruction manual for detailed procedures.
M6DXF2 SPECIFICATIONS
ES-7848 Rev.6 Page 3/5
http://www.m-system.co.jp/
MODEL: M6DXF2
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
WIRE INSERTION ANGLE: approx. 7°
8–M3
EURO TERMINAL
DIN RAIL HOOK
5
6
7
8
DIN RAIL
35mm wide
1
2
3
4
SCREWDRIVER
INSERTION ANGLE
: approx. 40°
[0.5 (.02)]
5.9 (.23)
102 (4.02)
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS
IND. LED
OUTPUT
DIP SW
INPUT
DIP SW
Isolation
Digital
Computation
Output
Driver
+
–
5
6
+
–
1
2
OUTPUT
POWER
24.9 Ω
INPUT 1
Low Drift
Amplifier
POWER LED
+
–
7
8
+
–
3
24.9 Ω
INPUT 2
4
CONFIGURATOR
JACK
POWER
M6DXF2 SPECIFICATIONS
ES-7848 Rev.6 Page 4/5
http://www.m-system.co.jp/
MODEL: M6DXF2
FUNCTIONS
■ FUNCTIONS
• Math Functions
Temperature compensation (w/o square root extraction)
K1X1
X0 = ––––––––––
√K2X2 + A2
where
X0 : Compensated flow (linear characteristics)
X1 : Uncompensated flow
X2 : Temperature
Temperature compensation (with square root extraction)
K1√ X1
X0 = ––––––––––
√K2X2 + A2
where
X0 : Compensated flow (linear characteristics)
X1 : Uncompensated flow
X2 : Temperature
Pressure compensation (w/o square root extraction)
X0 = K1X1√K2X2 + A2
where
X0 : Compensated flow (linear characteristics)
X1 : Uncompensated flow
X2 : Pressure
Pressure compensation (with square root extraction)
X0 = K1√ X1√K2X2 + A2
where
X0 : Compensated flow (linear characteristics)
X1 : Uncompensated flow
X2 : Pressure
Addition / Subtraction
X0 = K0{K1(X1 + A1) + K2(X2 + A2)} + A0
Multiplication
X0 = K0(K1X1 + A1) (K2X2 + A2) + A0
Division
K0(K1X1 + A1)
X0 = ––––––––––––––– + A0
(K2X2 + A2)
• Signal Selector Functions
High selector
X0 = X1 with X1 ≥ X2
X0 = X2 with X1 < X2
Low selector
X0 = X2 with X1 ≥ X2
X0 = X1 with X1 < X2
Available range
X0 : Output (%) -2 to +102%
X1 through X2 : Input (%) -2 to +102%
K0 through K2 : Gain (no unit) ±29.999
A0 through A2 : Bias (%) ±299.99%
Factory default setting: Addition / Subtraction
K0 = 1, K1 = 1, K2 = 1, A0 = 0%, A1 = 0%, A2 = 0%
Specifications are subject to change without notice.
M6DXF2 SPECIFICATIONS
ES-7848 Rev.6 Page 5/5
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明