M6DBS-08A/UL [MSYSTEM]
Euro Terminal Ultra-Slim Signal Conditioners M6D Series;型号: | M6DBS-08A/UL |
厂家: | M-SYSTEM |
描述: | Euro Terminal Ultra-Slim Signal Conditioners M6D Series |
文件: | 总5页 (文件大小:268K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M6DBS
Euro Terminal Ultra-Slim Signal Conditioners M6D Series
RELATED PRODUCTS
• M6D series signal conditioners (Not able to supply to AC
power signal conditioners (M2 code))
INSTALLATION BASE
Functions & Features
• Power supply module (model: M6DPS1)
• Power supply module (model: M6DPS2)
• Power supply module (model: M6-PSM)
• Blank filler module (model: M6DDM)
• Backplane to collectively supply power to the M6D
modules in combination with the Power Supply Module
(model: M6DPSx or M6-PSM)
GENERAL SPECIFICATIONS
Capacity: Up to 48 modules (including power supply
module) with Extension Bases (The usable number of signal
conditioners depends on the capacity of the power supply
module. Refer to the M6-PSM specification sheets.)
Isolation: Power to ground
INSTALLATION
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Surface or DIN rail
MODEL: M6DBS–[1][2]
Weight:
ORDERING INFORMATION
• Code number: M6DBS-[1][2]
Specify a code from below for each [1] and [2].
(e.g. M6DBS-08/UL/Q)
M6DBS-08, -08P: 50 g (1.8 oz) without signal conditioners
M6DBS-08A: 80 g (2.8 oz) without signal conditioners
• Specify the specification for option code /Q
(e.g. /C01)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (power to ground)
[1] NUMBER OF SLOTS
08: 8 slots
STANDARDS & APPROVALS
EU conformity:
08P: 8 slots (for extension)
08A: 8 slots + power supply slot (for model M6-PSM)
(UL not available)
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
[2] OPTIONS (multiple selections)
Standards & Approvals
EN 50581
Approval:
blank: CE marking
UL/C-UL nonincendive Class I, Division 2,
Groups A, B, C, and D
/UL: UL approval, CE marking
Other Options
(ANSI/ISA-12.12.01, CAN/CSA-C22.2 No.213)
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.61010-1)
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the main PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
M6DBS SPECIFICATIONS
ES-7845 Rev.11 Page 1/5
http://www.m-system.co.jp/
MODEL: M6DBS
EXTERNAL VIEW
Install signal conditioners from the slot at either end.
Power Supply Modules (M6DPS1 or M6DPS2) could be mounted at any slots, however,
installing them at either end is generally recommended.
Mount the power supply module (M6-PSM) on the power module slot of M6DBS-08A.
■ M6DBS-08, M6DBS-08P
■ M6DBS-08A
Signal Conditioner or
Power Supply Module
Power Supply
Module
Signal
Conditioner
1 2 • • • •
8
1 2
8
• • • •
M6DBS SPECIFICATIONS
ES-7845 Rev.11 Page 2/5
http://www.m-system.co.jp/
MODEL: M6DBS
EXTERNAL DIMENSIONS unit: mm (inch)
■ M6DBS-08, M6DBS-08P
[5 (.20)]
27 (1.06)
11.5 (.45)
49 (1.93)
24.4 (.96)
[3 (.12)]
3–4.5 (.18) dia. MTG HOLE
2 (.08) deep
DIN RAIL
35mm wide
22.5 (.89)
37 (1.46)
116 (4.57)
■ M6DBS-08A
[3 (.12)]
[5 (.20)]
3 (.12)
72 (2.83)
27 (1.06)
24.4 (.96)
3–4.5 (.18) dia. MTG HOLE
2 (.08) deep
DIN RAIL
35mm wide
37 (1.46)
22.5 (.89)
116 (4.57)
M6DBS SPECIFICATIONS
ES-7845 Rev.11 Page 3/5
http://www.m-system.co.jp/
MODEL: M6DBS
MOUNTING REQUIREMENTS unit: mm (inch)
■ MOUNTING DIRECTION
The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise,
may shorten the product’s life expectation or deteriorate its performance.
Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)
M6DBS
10
10
(.39)
(.39)
Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.)
■ SURFACE MOUNTING
• M6DBS-08
• M6DBS-08A
24.4 (.96)
3-M4
3-M4
37 (1.46)
37 (1.46)
• M6DBS-08 + M6DBS-08P
• M6DBS-08A + M6DBS-08P
24.4 (.96)
1
1
n-M4
*
n-M4 *
37 (1.46)
37 (1.46)
37 (1.46)
37 (1.46)
11.8 (.46)
11.8
(.46)
*1. n = (Number of bases) x 3
M6DBS SPECIFICATIONS
ES-7845 Rev.11 Page 4/5
http://www.m-system.co.jp/
MODEL: M6DBS
Specifications are subject to change without notice.
M6DBS SPECIFICATIONS
ES-7845 Rev.11 Page 5/5
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明