M60SVS-R/Q [MSYSTEM]
Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series;
| 型号： | M60SVS-R/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series |
| 文件： | 总3页 (文件大小：186K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: M60SVS
Base-free Interconnecting Ultra-Slim Signal Conditioners M60S Series
OUTPUT – Field-selectable
Current
4 – 20 mA DC (Load resistance 550 Ω max.)
0 – 20 mA DC (Load resistance 550 Ω max.)
Voltage
SIGNAL TRANSMITTER
(field-configurable)
Functions & Features
0 – 10 V DC (Load resistance 10 kΩ min.)
2 – 10 V DC (Load resistance 10 kΩ min.)
0 – 5 V DC (Load resistance 5000 Ω min.)
1 – 5 V DC (Load resistance 5000 Ω min.)
• Converts DC input from a sensor into a standard process
signal
• Output range and response time selectable with DIP SW
• Power connector for interconnecting modules and
collectively supplying power
• Spring clamp terminal connection for easy wiring
• 6-mm wide ultra-slim design
POWER INPUT
DC Power
• Low profile allows mounting in a 120-mm deep panel
• High-density mounting
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• Power indicator LED
8 (.31)
[1] OPTIONS
blank: none
/Q: Options other than the above (specify the specification)
108 (4.25)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
102 (4.02)
/C02: Polyurethane coating
GENERAL SPECIFICATIONS
Connection
MODEL: M60SVS-R[1]
Input and output: Spring clamp terminal
Power input: Via the power connector or the spring clamp
terminal
ORDERING INFORMATION
• Code number: M60SVS-R[1]
Specify a code from below for [1].
(e.g. M60SVS-R/Q)
Applicable wire size: 0.2 to 1.5 mm , stripped length 8 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Zero adjustment: -2 to +2 % (front)
• Specify the specification for option code /Q
(e.g. /C01)
Span adjustment: 98 to 102 % (front)
Power LED: Green LED turns on when the power is supplied.
• Default at shipment
Input range: 4 – 20 mA DC
Output range: 4 – 20 mA DC
Response time: Standard response
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
INPUT – Field-selectable
Current
INSTALLATION
Power consumption: Max. 0.6 W
4 – 20 mA DC (Input resistance 50 Ω)
0 – 20 mA DC (Input resistance 50 Ω)
Voltage
Power input: Max. 3 A (Total current consumed by the
interconnected signal conditionerse must be 3 A or less.)
Operating temperature: -20 to +55°C (-4 to +131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
0 – 10 V DC (Input resistance 200 kΩ min.)
2 – 10 V DC (Input resistance 200 kΩ min.)
0 – 5 V DC (Input resistance 100 kΩ min.)
1 – 5 V DC (Input resistance 100 kΩ min.)
Weight: 65 g (2.3 oz)
M60SVS SPECIFICATIONS
ES-8022 Rev.1 Page 1/3
http://www.m-system.co.jp/
MODEL: M60SVS
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
I/O setting accuracy: ±0.2 %
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F)
Response time (0 – 90 %): selectable with DIP SW
Standard: ≤ 500 msec.
Fast: ≤ 5 msec.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute (input to output
to power to ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
EXTERNAL VIEW
Refer to the instruction manual for the setting procedure.
■ LEFT SIDE VIEW
■ FRONT VIEW (with the front cover removed)
DIP SW for setting
output range
SW1
Power LED
Zero adj.
On
1 2 3 4 5 6
SW1
Span adj.
DIP SW for setting
various functions
SW2
SW2
On
1 2 3 4
M60SVS SPECIFICATIONS
ES-8022 Rev.1 Page 2/3
http://www.m-system.co.jp/
MODEL: M60SVS
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
(Test lead pin 1 dia.)
5
6
7
8
DIN rail
(35mm wide)
1
2
3
4
2.1 (.08)
6 (.24)
2 (.08)
0.5 (.02)
3.7 (.15)
6 (.24)
102 (4.02)
• With the end cover attached
• Capable of High-density mounting
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
DIP SW for setting
various functions
DIP SW for setting
output range
Z
S
Isolation
Output
Driver
Low Drift
Amplifier
+
−
+
−
1
2
3
4
5
6
*
INPUT
OUTPUT
POWER
Power LED
+
−
7
8
POWER
* Input shunt resistor incorporated for current input.
Specifications are subject to change without notice.
M60SVS SPECIFICATIONS
ES-8022 Rev.1 Page 3/3
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明