M3SXV-Z1DZ1-AD/Q [MSYSTEM]
Super-space-saving Signal Conditioners M3S-UNIT Series;型号: | M3SXV-Z1DZ1-AD/Q |
厂家: | M-SYSTEM |
描述: | Super-space-saving Signal Conditioners M3S-UNIT Series |
文件: | 总4页 (文件大小:107K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M3SXV
V2: Range -10 – +10 V DC
V3: Range -5 – +5 V DC
Super-space-saving Signal Conditioners
M3S-UNIT Series
(Configurator software is used to change output over the
described range of the selected suffix code.
SIGNAL TRANSMITTER
(PC programmable)
For changing between suffix codes, set the Output Range
Selector on the side of unit before software adjustment.)
Functions & Features
• Converts a DC input into a standard process
signal
[3] POWER INPUT
AC Power
• PC programmable
M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,
47 – 66 Hz)
• Universal AC/DC power input
• High-density mounting
• Power and status indicator LED
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Universal
12 (.47)
AD: 100 – 240 V AC / 24 – 240 V DC (universal)
(Operational voltage range 90 - 264 V AC, 47 - 66 Hz /
21.6 - 264 V DC, ripple 10 %p-p max.)
106
(4.17)
[4] OPTIONS
blank: none
/Q: With options (specify the specification)
110.5 (4.35)
mm (inch)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODEL: M3SXV–[1][2]–[3][4]
/C02: Polyurethane coating
/C03: Rubber coating
ORDERING INFORMATION
• Code number: M3SXV-[1][2]-[3][4]
Specify a code from below for each [1] through [4].
(e.g. M3SXV-Z1Z1-R/Q)
RELATED PRODUCTS
• PC configurator software (model: M3SCFG)
Downloadable at M-System’s web site.
• Input range (e.g. 4 – 20 mA DC)
• Output range (e.g. 4 – 20 mA DC)
• Specify the specification for option code /Q
(e.g. /C01)
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
[1] INPUT
Current
GENERAL SPECIFICATIONS
Construction: Small-sized front terminal structure
Z1: Range 0 – 50 mA DC (Input resistance 24.9 Ω)
Voltage
Connection: Euro type connector terminal
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
S1: Range -1000 – +1000 mV DC (Input resistance 1 MΩ min.)
S2: Range -10 – +10 V DC (Input resistance 1 MΩ min.)
(Configurator software is used to change the input type and
precise range.)
Housing material: Flame-resistant resin (gray)
Isolation: Input to output to power
Overrange output: -2 – +102 %
(Negative current output is not available.)
Zero adjustment: -2 to +2 % (PC programming)
Span adjustment: 98 to 102 % (PC programming)
Power LED: Green light turns on when the power is supplied.
Status indicator LED: Orange LED; Blinking patterns indicate
different operating status of the transmitter.
[2] OUTPUT
Current
Z1: Range 0 – 20 mA DC
Voltage
M3SXV SPECIFICATIONS
ES-7701 Rev.5 Page 1/4
http://www.m-system.co.jp/
MODEL: M3SXV
Programming: Downloaded from PC; input type and range,
output type and range, zero and span, user’s linearization
table (max. 101 points, specified within -2 to +102% for
both input and output), etc.
maintained.
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2: 0 – 10 V DC
For detailed information, refer to the users manual for the
PC configurator.
V3: 1 – 5 V DC
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
INSTALLATION
Power consumption
INPUT SPECIFICATIONS
■ DC Current: Input resistor incoporated
(If not specified, the input range is 4 – 20 mA DC.)
Input range: 0 – 50 mA DC
•AC:
Approx. 2 VA at 100 V
Approx. 3 VA at 200 V
Approx. 4 VA at 264 V
•DC:
Minimum span: 2 mA
Offset: Lower range can be any specific value within the
input range provided that the minimum span is maintained.
■ DC Voltage
R: Approx. 0.5 W
AD: Approx. 1 W
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN rail
•Code S1 (narrow spans)
Input range: -1000 – +1000 mV DC
Minimum span: 100 mV
Weight: 85 g (3.0 oz)
•Code S2 (wide spans)
Input range: -10 – +10 V DC
PERFORMANCE in percentage of span
Overall accuracy: Input accuracy + output accuracy
Inversely proportional to the span.
Minimum span: 1 V
Offset: Lower range can be any specific value within the
input range provided that the minimum span is maintained.
If not specified, the input range is shown below.
S1: 0 – 100 mV DC
See CALCULATION EXAMPLES OF OVERALL ACURACY.
• Input accuracy: (% of max. input range)
-1000 – +1000 mV : ±0.01 %
S2: 1 – 5 V DC
-10 – +10 V : ±0.01 %
0 – 50 mA : ±0.02 %
OUTPUT SPECIFICATIONS
■ DC Current
• Output accuracy: ±0.04 % of max. output range
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span
Response time: ≤ 0.5 sec. (0 – 90 %)
Output range: 0 – 20 mA DC
Conformance range: 0 – 20.4 mA DC
Minimum span: 1 mA
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Load resistance: Output drive 11 V max.
(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])
If not specified, the output range is 4 – 20 mA DC.
■ DC Voltage
CALCULATION EXAMPLES OF OVERALL ACCURACY
[Example] Input Type -10 – +10 V, Input Range 1 – 5 V,
Output Type -5 – +5 V, Output Range 1 – 5 V
• Input accuracy = Max. Input Range (20 V) ÷ Span (4 V) ×
0.01 % = 0.05 %
Code V2 (wide spans)
Output range: -10 – +10 V DC
Conformance range: -10.4 – +10.4 V DC
Minimum span: 1 V
• Output accuracy = Max. Output Range (10 V) ÷ Span (4 V)
× 0.04 % = 0.1 %
Accuracy= ±0.15 %
Code V3 (narrow spans)
Output range: -5 – +5 V DC
Conformance range: -5.2 – +5.2 V DC
Minimum span: 0.5 V
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
M3SXV SPECIFICATIONS
ES-7701 Rev.5 Page 2/4
http://www.m-system.co.jp/
MODEL: M3SXV
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Installation Category II
Pollution Degree 2
Input or output to power: Reinforced insulation (300 V)
Input to output: Basic insulation (300 V)
RoHS Directive
EN 50581
EXTERNAL VIEW
Power LED
Output Range Selectors
ON
OFF
SW1
Status Indicator LED
Configurator Jack
1
3
2
4
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
7
5
8
6
DIN RAIL
35mm wide
1
3
2
4
12
(.47)
110.5 (4.35)
[5 (.20)]
• When mounting, no extra space is needed between units.
M3SXV SPECIFICATIONS
ES-7701 Rev.5 Page 3/4
http://www.m-system.co.jp/
MODEL: M3SXV
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS LED
Isolation
DIP SW
24.9Ω
+
Digital
Computation
Output
Driver
+
–
1
5
6
CURRENT
(Z1)
OUTPUT
POWER
Low Drift
Amplifier
–
2
–
VOLTAGE
(S1, S2)
POWER LED
3
+
U(+)
V(–)
7
8
4
CONFIGURATOR
JACK
Specifications are subject to change without notice.
M3SXV SPECIFICATIONS
ES-7701 Rev.5 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明