M3SXM--1V3-M2/Q [MSYSTEM]
Super-space-saving Signal Conditioners M3S-UNIT Series;型号: | M3SXM--1V3-M2/Q |
厂家: | M-SYSTEM |
描述: | Super-space-saving Signal Conditioners M3S-UNIT Series |
文件: | 总3页 (文件大小:104K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: M3SXM
Selector on the side of unit before software adjustment.)
Super-space-saving Signal Conditioners
M3S-UNIT Series
[2] POWER INPUT
AC Power
POTENTIOMETER TRANSMITTER
(PC programmable)
M2: 100 – 240 V AC (Operational voltage range 90 – 264 V,
47 – 66 Hz)
Functions & Features
DC Power
• Provides a DC output proportional to a potentiometer or
slidewire position input
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Universal
• Linearization and burnout protection
• PC programmable
AD: 100 – 240 V AC / 24 – 240 V DC (universal)
(Operational voltage range 90 - 264 V AC, 47 - 66 Hz /
21.6 - 264 V DC, ripple 10 %p-p max.)
• Universal AC/DC power input
• High-density mounting
• Power and status indicator LED
[3] OPTIONS
blank: none
12 (.47)
/Q: With options (specify the specification)
106
(4.17)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
110.5 (4.35)
mm (inch)
/C03: Rubber coating
RELATED PRODUCTS
• PC configurator software (model: M3SCFG)
MODEL: M3SXM–1[1]–[2][3]
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
ORDERING INFORMATION
• Code number: M3SXM-1[1]-[2][3]
Specify a code from below for each [1] through [3].
(e.g. M3SXM-1Z1-R/Q)
• Output range (e.g. 4 – 20 mA DC)
• Specify the specification for option code /Q
(e.g. /C01)
GENERAL SPECIFICATIONS
Construction: Small-sized front terminal structure
Connection: Euro type connector terminal
Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm
2
Housing material: Flame-resistant resin (gray)
Isolation: Input to output to power
INPUT
1: Total resistance 100 – 5000 Ω
Overrange output: -2 – +102 %
(Configurator software is used to change the input range.)
(Negative current output is not available.)
Zero adjustment: -2 to +2 % (PC programming)
Span adjustment: 98 to 102 % (PC programming)
Burnout: Upscale standard; downscale or no burnout
optional by programming
[1] OUTPUT
Current
Z1: Range 0 – 20 mA DC
Voltage
Power LED: Green light turns on when the power is supplied.
Status indicator LED: Orange LED; Blinking patterns indicate
different operating status of the transmitter.
Programming: Downloaded from PC; input type and range,
output type and range, zero and span, burnout type, user’s
linearization table (max. 101 points, specified within -2 to
V2: Range -10 – +10 V DC
V3: Range -5 – +5 V DC
(Configurator software is used to change output over the
described range of the selected suffix code.
For changing between suffix codes, set the Output Range
M3SXM SPECIFICATIONS
ES-7704 Rev.6 Page 1/3
http://www.m-system.co.jp/
MODEL: M3SXM
+102 % for both input and output), etc.
Refer to the instruction manual for details.
Configurator connection: 2.5 dia. miniature jack;
RS-232-C level
•DC:
R: Approx. 0.5 W
AD: Approx. 1 W
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN rail
INPUT SPECIFICATIONS
Sensing current: ≤ 0.15 mA
Minimum span of each range
0 – 100 Ω : 10 Ω
Weight: 85 g (3.0 oz)
PERFORMANCE in percentage of span
Accuracy: Input accuracy + output accuracy
(Inversely proportional to the span.)
Input accuracy: (% of range)
0 – 300 Ω : 30 Ω
0 – 600 Ω : 60 Ω
0 – 1200 Ω : 120 Ω
0 – 2500 Ω : 250 Ω
0 – 100 Ω : ±0.05 (%)
0 – 5000 Ω : 500 Ω
0 – 300 Ω : ±0.05
If not specified, the input range is 0 – 1200 Ω.
0 – 600 Ω : ±0.03
0 – 1200 Ω : ±0.03
0 – 2500 Ω : ±0.01
OUTPUT SPECIFICATIONS
■ DC Current
0 – 5000 Ω : ±0.01
Output accuracy: ±0.04 % of max. output range
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) of max. span
Response time: ≤ 1 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
Output range: 0 – 20 mA DC
Conformance range: 0 – 20.4 mA DC
Minimum span: 1 mA
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input to output
to power to ground)
Load resistance: Output drive 11 V max.
(e.g. 4 – 20 mA: 550 Ω [11 V ÷ 20 mA])
If not specified, the output range is 4 – 20 mA DC.
■ DC Voltage
CALCULATION EXAMPLES OF OVERALL ACCURACY
[Example] Total Resistance 0 – 1200 Ω, Input Range 250 –
750 Ω, Output Type -5 – +5 V, Output Range 1 – 5 V
Max. Input Range (1200 Ω) ÷ Span (500 Ω) × 0.03 % +
Max. Output Range (10 V) ÷ Span (4V) × 0.04 % = 0.17 %
Code V2 (wide spans)
Output range: -10 – +10 V DC
Conformance range: -10.4 – +10.4 V DC
Minimum span: 1 V
Code V3 (narrow spans)
Output range: -5 – +5 V DC
STANDARDS & APPROVALS
EU conformity:
Conformance range: -5.2 – +5.2 V DC
Minimum span: 0.5 V
EMC Directive
Offset: Lower range can be any specific value within the
output range provided that the minimum span is
maintained.
EMI EN 61000-6-4
EMS EN 61000-6-2
Low Voltage Directive
EN 61010-1
Load resistance: Output drive 1 mA max.
(e.g. 1 – 5 V: 5000 Ω [5 V ÷ 1 mA])
If not specified, the output range is shown below.
V2: 0 – 10 V DC
Installation Category II
Pollution Degree 2
Input or output to power: Reinforced insulation (300 V)
Input to output: Basic insulation (300 V)
RoHS Directive
V3: 1 – 5 V DC
INSTALLATION
Power consumption
•AC:
EN 50581
Approx. 2 VA at 100 V
Approx. 3 VA at 200 V
Approx. 4 VA at 264 V
M3SXM SPECIFICATIONS
ES-7704 Rev.6 Page 2/3
http://www.m-system.co.jp/
MODEL: M3SXM
EXTERNAL VIEW
Power LED
Output Range Selectors
ON
OFF
SW1
Status Indicator LED
Configurator Jack
1
3
2
4
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
7
5
8
6
DIN RAIL
35mm wide
1
3
2
4
12
(.47)
110.5 (4.35)
[5 (.20)]
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS LED
DIP SW
Isolation
POTENTIOMETER
max.
Digital
Computation
Output
Driver
+
+
–
3
2
1
1
5
6
OUTPUT
POWER
Low Drift
Amplifier
2
POWER LED
–
4
min.
7
8
U(+)
V(–)
3
CONFIGURATOR
JACK
Specifications are subject to change without notice.
M3SXM SPECIFICATIONS
ES-7704 Rev.6 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明