LDSN-A6 [MSYSTEM]
INPUT LOOP POWERED ISOLATOR;型号: | LDSN-A6 |
厂家: | M-SYSTEM |
描述: | INPUT LOOP POWERED ISOLATOR 输入元件 |
文件: | 总3页 (文件大小:114K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: LDSN
/Q: Option other than the above (specify the specification)
INPUT LOOP POWERED ISOLATOR
(super-miniature size)
Functions & Features
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Loop-powered design eliminates output loop power supply
• 500 V DC input-to-output isolation
• 350 Ω output drive with 4 – 20 mA
/C02: Polyurethane coating
/C03: Rubber coating
Typical Applications
TERMINAL SCREW MATERIAL
/S01: Stainless steel
• Isolation between control room and field instrumentation,
between telemetering system and input device
• Eliminates ground problems in existing systems thanks to
easiness of application without requiring additional power
wiring
GENERAL SPECIFICATIONS
Construction: Stand-alone; terminal access at the front
Connection: M4 screw terminals (torque 1.2 N·m)
Screw terminal: Nickel-plated brass (standard) or stainless
steel
• Can be used as field-I/O terminals
60
(2.36)
Housing material: Flame-resistant resin (black)
Isolation: Input to output
Zero adjustment (front)
46
(1.81)
Voltage output: -5 to +5 %
Current output: -0.5 to +0.5 %
Span adjustment (front)
44 (1.73)
Voltage output: 95 to 105 %
mm (inch)
Current output: 98.5 to 101.5 %
MODEL: LDSN–[1][2][3]
INPUT & OUTPUT
■ Input 4 – 20 mA DC / Output 1 – 5 V DC
Equivalent input impedance: Approx. 250 Ω with 20 mA
input
ORDERING INFORMATION
• Code number: LDSN–[1][2][3]
Specify a code from below for each [1] through [3].
(e.g. LDSN-A6/D/Q)
Operational range: 3 – 22 mA DC
(Accuracy is assured within 4 – 22 mA)
Load resistance: ≥ 50 kΩ
• Specify the specification for option code /Q
(e.g. /C01/S01)
■ Input 10 – 50 mA DC / Output 1 – 5 V DC
Equivalent input impedance: Approx. 100 Ω with 50 mA
input
[1] INPUT
Current
Operational range: 7 – 55 mA DC
(Accuracy is assured within 8 – 55 mA)
Load resistance: ≥ 50 kΩ
A: 4 – 20 mA DC
H: 10 – 50 mA DC
[2] OUTPUT
Current
■ Input 4 – 20 mA DC / Output 4 – 20 mA DC
Equivalent input impedance: 230 Ω plus load resistance with
20 mA input
A: 4 – 20 mA DC
Voltage
Operational range: 3 – 22 mA DC
6: 1 – 5 V DC
(Accuracy is assured within 4 – 22 mA)
Load resistance: 50 – 350 Ω (min. 50 Ω required for
adequate operation)
[3] OPTIONS (multiple selections)
Mounting
■ Input 10 – 50 mA DC / Output 4 – 20 mA DC
Equivalent input impedance: 90 Ω + [load resistance×0.16]
with 50 mA input
blank: Surface
/D: DIN rail
Other Options
blank: none
Operational range: 7 – 55 mA DC
http://www.m-system.co.jp/
LDSN SPECIFICATIONS
ES-1951 Rev.8 Page 1/3
MODEL: LDSN
(Accuracy is assured within 8 – 55 mA)
Load resistance: 50 – 600 Ω (min. 50 Ω required for
adequate operation)
Response time
Voltage output: ≤ 0.5 sec. (0 – 90 %)
Current output: Approx. 15 msec. (0 – 90 %)
Load effect (current output)
•INPUT 4 – 20 mA DC / OUTPUT 1 – 5 V DC
4 – 20 mA input: 0.015 %/Ω (50 – 150 Ω)
0.003 %/Ω (150 – 350 Ω)
5.0
approx. 5.0
10 – 50 mA input: 0.015 %/Ω (50 – 100 Ω)
0.003 %/Ω (100 – 600 Ω)
4.0
approx.
3.7
(The unit is calibrated with 250 Ω load at the factory.)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
3.0
4
12
20
INPUT CURRENT [mA]
500 V AC @1 minute (input to output)
2000 V AC @1 minute (input or output to ground)
•INPUT 10 – 50 mA DC / OUTPUT 1 – 5 V DC
5.0
approx. 5.0
4.0
approx.
3.7
3.0
10
30
50
INPUT CURRENT [mA]
•INPUT 4 – 20mA DC / OUTPUT 4 – 20 mA DC
12.0
approx. 11.6
(load 350Ω)
10.0
8.0
approx. 9.6
(load 250Ω)
6.0
approx. 5.0
approx. 4.6
approx. 3.8
approx. 5.6
(load 50Ω)
3.0
4
12
20
INPUT CURRENT [mA]
•INPUT 10 – 50 mA DC / OUTPUT 4 – 20 mA DC
10.0
approx. 9.3
(load 600Ω)
8.0
approx. 6.5
(load 250Ω)
6.0
approx. 4.7
approx. 4.1
approx. 3.8
3.0
approx. 4.9
(load 50Ω)
10
30
50
INPUT CURRENT [mA]
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 85 %RH (non-condensing)
Mounting: Surface or DIN rail
Weight: 100 g (0.22 lb) for surface mounting
120 g (0.24 lb) for DIN rail mounting
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Temp. coefficient
Voltage output: ±0.015 %/°C (±0.008 %/°F)
Current output: ±0.02 %/°C (±0.01 %/°F)
http://www.m-system.co.jp/
LDSN SPECIFICATIONS
ES-1951 Rev.8 Page 2/3
MODEL: LDSN
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
■ SURFACE MOUNTING
■ DIN RAIL MOUNTING
4–M4
SCREW
4–M4
SCREW
ZERO ADJ.
ZERO ADJ.
9 (.35)
9 (.35)
SPAN ADJ.
SPAN ADJ.
1
2
1
2
2–2.5 (.10) rad.
3
4
3
4
60 (2.36)
72 (2.83)
80 (3.15)
26 (1.02)
60 (2.36)
80 (3.15)
MOUNTING REQUIREMENTS unit: mm (inch)
■ DIN RAIL MOUNTING
■ SURFACE MOUNTING
72 (2.83) min.
M4 SCREW
72 (2.83)
72 (2.83) min.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
■ CURRENT OUTPUT
■ VOLTAGE OUTPUT
S
Isolation
Z
S
Load Effect
Compensation
Buffer
Amplifier
+
–
1
2
3
4
+
–
+
–
1
2
Chopper
Inverter
3
4
+
–
OUTPUT
INPUT
OUTPUT
Z
INPUT
Rectifier
Inverter
Specifications are subject to change without notice.
http://www.m-system.co.jp/
LDSN SPECIFICATIONS
ES-1951 Rev.8 Page 3/3
相关型号:
©2020 ICPDF网 联系我们和版权申明