KWSBS-15DD-C [MSYSTEM]
Plug-in Signal Conditioners K-UNIT;![KWSBS-15DD-C](http://pdffile.icpdf.com/pdf2/p00353/img/icpdf/KWSBS-15BA-C_2172557_icpdf.jpg)
型号: | KWSBS-15DD-C |
厂家: | ![]() |
描述: | Plug-in Signal Conditioners K-UNIT |
文件: | 总3页 (文件大小:96K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: KWSBS
Plug-in Signal Conditioners K-UNIT
[2] OUTPUT 1
Current
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)
D: 0 – 20 mA DC (Load resistance 600 Ω max.)
E: 0 – 16 mA DC (Load resistance 750 Ω max.)
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
ANALOG SUBTRACTOR
(two isolated outputs)
Functions & Features
• Accepts two DC inputs and provides two isolated standard
process signals proportional to the difference of the two
signals
• Isolation up to 2000 V AC
• High-density mounting
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)
3: 0 – 1 V DC (Load resistance 1000 Ω min.)
4: 0 – 10 V DC (Load resistance 10 kΩ min.)
5: 0 – 5 V DC (Load resistance 5000 Ω min.)
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
4W: -10 – +10 V DC (Load resistance 10 kΩ min.)
5W: -5 – +5 V DC (Load resistance 5000 Ω min.)
0: Specify voltage (See OUTPUT SPECIFICATIONS)
50
(1.97)
80
(3.15)
132
(5.20)
mm (inch)
[3] OUTPUT 2
Current
MODEL: KWSBS–[1][2][3]–[4][5]
A: 4 – 20 mA DC (Load resistance 350 Ω max.)
B: 2 – 10 mA DC (Load resistance 700 Ω max.)
C: 1 – 5 mA DC (Load resistance 1400 Ω max.)
D: 0 – 20 mA DC (Load resistance 350 Ω max.)
E: 0 – 16 mA DC(Load resistance 430 Ω max.)
F: 0 – 10 mA DC (Load resistance 700 Ω max.)
G: 0 – 1 mA DC (Load resistance 7000 Ω max.)
Z: Specify current (See OUTPUT SPECIFICATIONS)
Voltage
ORDERING INFORMATION
• Code number: KWSBS-[1][2][3]-[4][5]
Specify a code from below for each of [1] through [5].
(e.g. KWSBS-6A6-B/Q)
• Special input and output ranges (For codes Z & 0)
• Parameters (e.g. K
1
= 2.00, K = 0.10)
2
• Specify the specification for option code /Q
(e.g. /C01/S01)
Same range availability as Output 1
Note: When the user requires a current and a voltage
output, specify the current to be the Output 1 which allows
a greater load.
[4] POWER INPUT
AC Power
B: 100 V AC
C: 110 V AC
D: 115 V AC
F: 120 V AC
G: 200 V AC
H: 220 V AC
J: 240 V AC
[1] INPUT
Voltage
1: 0 – 10 mV DC (Input resistance 10 kΩ min.)
15: 0 – 50 mV DC (Input resistance 10 kΩ min.)
16: 0 – 60 mV DC (Input resistance 10 kΩ min.)
2: 0 – 100 mV DC (Input resistance 100 kΩ min.)
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
DC Power
S: 12 V DC
R: 24 V DC
[5] OPTIONS
blank: none
/Q: With options (specify the specification)
KWSBS SPECIFICATIONS
ES-3640 Rev.3 Page 1/3
http://www.m-system.co.jp/
MODEL: KWSBS
•DC: Operational voltage range: rating ±10 %
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
ripple 10 %p-p max., approx. 3 W (125 mA at 24 V)
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
/C02: Polyurethane coating
/C03: Rubber coating
Weight: 400 g (0.88 lb)
TERMINAL SCREW MATERIAL
/S01: Stainless steel
PERFORMANCE in percentage of span
Accuracy: ±0.2 % (±0.4 % at K
1
and/or K > 1.00)
2
GENERAL SPECIFICATIONS
Construction: Plug-in
Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Connection: M3.5 screw terminals
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(input to output to power to ground)
Screw terminal: Chromated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input 1 or input 2 to output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
1000 V AC @ 1 minute (output 1 to output 2)
Span adjustment: 95 to 105 % (front)
Adjustable individually for each output 1 and output 2.
Equation: Output = K
(K × Input 1 > K × Input 2)
, K : 0.10 – 2.00 (parameters)
Output, Input 1 × K , Input 2 × K
, K are ex-factory specified.
1
× Input 1 – K × Input 2
2
1
2
K
1
2
1
2: 0 – 100%
K1
2
INPUT SPECIFICATIONS
■ DC Voltage: -300 – +300 V DC
Minimum span: 3 mV
Offset: Max. 1.5 times span
Input resistance
Span 3 – 10 mV : ≥ 10 kΩ
Span 10 – 100 mV : ≥ 10 kΩ
Span 0.1 – 1 V : ≥ 100 kΩ
Span ≥ 1 V : ≥ 1 MΩ
OUTPUT SPECIFICATIONS
■ DC Current: 0 – 20 mA DC
Minimum span: 1 mA
Offset: Max. 1.5 times span
Load resistance: Output drive 12 V max. for Output 1;
7 V max. for Output 2
■ DC Voltage: -10 – +12 V DC
Minimum span: 5 mV
Offset: Max. 1.5 times span
Load resistance: Output drive 1 mA max. at ≥ 0.5 V
INSTALLATION
Power input
•AC: Operational voltage range: rating ±10 %,
50/60 ±2 Hz, approx. 3 VA
KWSBS SPECIFICATIONS
ES-3640 Rev.3 Page 2/3
http://www.m-system.co.jp/
MODEL: KWSBS
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
DIN RAIL
35mm wide
8
7
6
5
4
2
–4.5 (.18) dia.
MTG HOLE
25 (.98) deep
9
3
2
10 11
1
11
–M3.5
SCREW
50 (1.97)
103 (4.06)
132 (5.20)
40 (1.57)
50 (1.97)
[3.3 (.13)]
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
Low Drift
Amplifier
Output
Driver
+
–
+
+
–
Subtractor
5
6
4
3
9
1
2
INPUT 1
INPUT 2
OUTPUT 1
Z
S
Low Drift
Amplifier
Output
Driver
+
10
11
7
OUTPUT 2
POWER
–
U(+)
V(–)
8
Base Socket
Specifications are subject to change without notice.
KWSBS SPECIFICATIONS
ES-3640 Rev.3 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明