HAPU-E1-RR [MSYSTEM]
Space-saving Plug-in Signal Conditioners H-UNIT;型号: | HAPU-E1-RR |
厂家: | M-SYSTEM |
描述: | Space-saving Plug-in Signal Conditioners H-UNIT |
文件: | 总4页 (文件大小:149K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: HAPU
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
Space-saving Plug-in Signal Conditioners H-UNIT
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
DC/FREQUENCY CONVERTER
(selectable range)
Functions & Features
• Providing a pulse rate output in proportion to DC input
signal
OUTPUT
1: Open collector (max. frequency 10 kHz)
• Frequency range adjustable with a front-mounted 16-
position rotary switch and potentiometer
• Low-end cutout adjustable
[2] POWER INPUT
DC Power
• Highdensity mounting
S: 12 V DC
Typical Applications
(Operational voltage range 12 V ±10 %, ripple 10 %p-p max.)
R: 24 V DC
• Totalizing applications in combination with a counter
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
26 (1.02)
[3] OPTIONS
blank: none
93
(3.66)
/Q: With options (specify the specification)
H•UNIT
137
(5.39)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
mm (inch)
/C02: Polyurethane coating
MODEL: HAPU–[1]1–[2][3]
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
ORDERING INFORMATION
• Code number: HAPU-[1]1-[2][3]
Specify a code from below for each of [1] through [3].
(e.g. HAPU-61-R/Q)
GENERAL SPECIFICATIONS
Construction: Plug-in
• Special input range (For codes Z & 0)
• Output frequency range (e.g. 0 – 100 Hz)
• Specify the specification for option code /Q
(e.g. /C01/S01)
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Zero adjustment: 0 – 5 % (front)
[1] INPUT
Span adjustment: 50 – 100 % of range (front)
Output frequency adjustment: Preselecting range
with a rotary switch and fine control
Current
A: 4 – 20 mA DC (Input resistance 250 Ω)
A1: 4 – 20 mA DC (Input resistance 50 Ω)
B: 2 – 10 mA DC (Input resistance 500 Ω)
C: 1 – 5 mA DC (Input resistance 1000 Ω)
D: 0 – 20 mA DC (Input resistance 50 Ω)
E: 0 – 16 mA DC (Input resistance 62.5 Ω)
F: 0 – 10 mA DC (Input resistance 100 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 100 Ω)
Z: Specify current (See INPUT SPECIFICATIONS)
Voltage
with span adjustment (50 – 100 %)
Low-end cutout: 0 to 10 % (front); a red LED assists in
adjusting the cutout point; turns on during the cutout.
INPUT SPECIFICATIONS
■ DC Current:
Shunt resistor attached to the input terminals (0.5 W)
Specify input resistance value for code Z.
■ DC Voltage: -300 – +300 V DC
Minimum span: 10 mV
1: 0 – 10 mV DC (Input resistance 100 kΩ min.)
2: 0 – 100 mV DC (Input resistance 100 kΩ min.)
Offset: Max. 1.5 times span
HAPU SPECIFICATIONS
ES-3450 Rev.8 Page 1/4
http://www.m-system.co.jp/
MODEL: HAPU
Input resistance (Input Span: Input Resistance)
10 – 100 mV : 10 k (Ω minimum)
0.1 – 1 V : 100 k
≥ 1 V : 1 M
OUTPUT SPECIFICATIONS
■ Open Collector
Frequency range: 0 – 10 kHz
Rating: 50V DC @ 50 mA (resistive load)
ON pulse width: 0.5 sec. max. (varies according to the
frequency)
Saturation voltage: 0.6 V DC
■ FREQUENCY RANGES
SPAN RANGE
SW No.
MIN. (50%)
MAX. (100%)
0
2
0 – 5 kHz
0 – 10 kHz
0 – 1.25 kHz
0 – 156 Hz
0 – 2.5 kHz
5
0 – 312 Hz
6
7
8
0 – 78 Hz
0 – 39 Hz
0 – 20 Hz
0 – 156 Hz
0 – 78 Hz
0 – 39 Hz
9
A
0 – 10 Hz
0 – 5 Hz
0 – 20 Hz
0 – 10 Hz
C
D
E
F
0 – 1.25 Hz
0 – 2.5 Hz
0 – 1.25 Hz
0 – 36 pulses/min.
0 – 18 pulses/min.
0 – 9 pulses/min.
0 – 36 pulses/min.
0 – 18 pulses/min.
INSTALLATION
Current consumption: ≤ 70 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail; Standard Rack Mounting
Frame BX-16H available
Weight: 200 g (0.44 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.25 %
Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(input to output to power)
1500 V AC @ 1 minute (input or output or power to ground)
HAPU SPECIFICATIONS
ES-3450 Rev.8 Page 2/4
http://www.m-system.co.jp/
MODEL: HAPU
EXTERNAL VIEW
Range Selector
Low-End Cutout
Monitor LED
Low-End Cutout Adj.
Zero Adj.
Span Adj.
EXTERNAL DIMENSIONS unit: mm (inch)
7.8 (.31)
CLAMP
(top & bottom)
1
2
4
15
(.59)
DIN RAIL
35mm wide
3
2–4.5 (.18)
HOLE
15 (.59) deep
5
6
8
8–M3.5
SCREW
7
107 (4.21)
137 (5.39)
26 (1.02)
26 (1.02)
[3.3 (.13)]
•When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM)
1
2
3
4
5
6
7
8
Input shunt resistor attached
for current input.
HAPU SPECIFICATIONS
ES-3450 Rev.8 Page 3/4
http://www.m-system.co.jp/
MODEL: HAPU
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
ROTARY SWITCH
Z
S
Isolation
Low Drift
Amplifier
Volt. / Freq.
Converter
Output
Driver
+
–
1
2
3
4
5
6
7
8
+
–
+
–
Divider
*
INPUT
R
OUTPUT
POWER
Low-End
Cutout
CUTOUT ADJ.
Base Socket
*Input shunt resistor attached for current input.
Output Connection Examples
■ Open Collector
5
6
+
–
+
–
Specifications are subject to change without notice.
HAPU SPECIFICATIONS
ES-3450 Rev.8 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明