FPP-22-R [MSYSTEM]
Space-saving Plug-in Signal Conditioners F-UNIT;型号: | FPP-22-R |
厂家: | M-SYSTEM |
描述: | Space-saving Plug-in Signal Conditioners F-UNIT |
文件: | 总4页 (文件大小:115K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: FPP
Space-saving Plug-in Signal Conditioners F-UNIT
[3] POWER INPUT
AC Power
K: 85 – 132 V AC
PULSE ISOLATOR
Functions & Features
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
L: 170 – 264 V AC
• Galvanically isolating pulse rate signals
• Input frequency = output frequency
• Various outputs (open collector, voltage pulses and photo
MOSFET relay pulse)
(Operational voltage range 170 – 264 V, 47 – 66 Hz)
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
P: 110 V DC
• High-density mounting
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
Typical Applications
• Isolating field pulse signals in order to reduce noises
• Changing e.g. dry contact signal to e.g. 5 V signals
[4] OPTIONS
blank: none
/Q: With options (specify the specification)
26 (1.02)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
100
(3.94)
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
137
(5.39)
mm (inch)
GENERAL SPECIFICATIONS
Construction: Plug-in
MODEL: FPP–[1][2]–[3][4]
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
ORDERING INFORMATION
• Code number: FPP-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. FPP-33-K/Q)
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Frequency range: Input and output are the same.
Chattering protection: Filter provided for mechanical
contact input
• Frequency range (e.g. 0 – 1000 Hz)
• Specify the specification for option code /Q
(e.g. /C01/S01)
INPUT SPECIFICATIONS
Excitation: 12V DC ±2 V @ 30 mA; shortcircuit protection
■ Open Collector
[1] INPUT
1: Mechanical contact (max. 30 Hz)
2: Open collector (max. 10 kHz)
3: Voltage pulse (max. 10 kHz)
Maximum frequency: 10 kHz
Pulse width time requirement: 10 μsec. min. for ON and OFF
Sensing: Approx. 12 V DC @3 mA
ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF
■ Mechanical Contact
[2] OUTPUT
1: Low frequency open collector (max. 30 Hz)
2: High frequency open collector (max. 10 kHz)
3: 5 V pulse (max. 10 kHz)
Maximum frequency: 30 Hz
Pulse width time requirement: 10 msec. min. for ON and
OFF
4: 12 V pulse (max. 10 kHz)
5: 24 V pulse (max. 10 kHz)
Sensing: Approx. 12 V DC @3 mA
ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF
■ Voltage Pulse
8: Photo MOSFET relay pulse (max. 30 Hz)
Maximum frequency: 10 kHz
FPP SPECIFICATIONS
ES-1461 Rev.10 Page 1/4
http://www.m-system.co.jp/
MODEL: FPP
Pulse width time requirement: 10 μsec. min. for high and
low levels
Power input code K, L, P:
1000 V AC @ 1 minute (input to output)
Waveforms: Square or sine
2000 V AC @ 1 minute (input or output or power to ground)
1500 V AC @ 1 minute (I/O to power)
Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level
Input impedance: 10 kΩ min.
OUTPUT SPECIFICATIONS
■ Low Frequency Open Collector
50 V DC @ 100 mA (resistive load)
Maximum frequency: 30 Hz
Timer: Limits ON time within 75 ±25 msec. for wider than
75 msec. pulses
Saturation voltage: 0.5 V DC
■ High Frequency Open Collector
50 V DC @ 100 mA (resistive load)
Maximum frequency: 10 kHz
Saturation voltage: 0.5 V DC
■ Voltage Pulse
Maximum frequency: 10 kHz
High level: Rating (5, 12 or 24 V) ±10 %
Low level: ≤ 0.5V
Load resistance:
≥ 250 Ω for 5 V
≥ 600 Ω for 12 V
≥ 1200 Ω for 24 V
■ Photo MOSFET Relay Pulse
Maximum frequency: 30 Hz
Timer: Limits ON time within 75 ±25 msec. for wider than
75 msec. pulses
Rating: 132 V AC @ 200 mA (cos ø = 1)
30 V DC @ 200 mA (resistive load)
ON resistance: ≤ 2 Ω
INSTALLATION
Power input
•AC: Approx. 4.5 VA
•DC: 24 V approx. 70 mA
110 V approx. 20 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail; Standard Rack Mounting
Frame BX-16H available
Weight: 180 g (0.40 lb)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength
Power input code R:
1000 V AC @ 1 minute (input to output)
2000 V AC @ 1 minute (input or output or power to ground)
500 V AC @ 1 minute (I/O to power)
FPP SPECIFICATIONS
ES-1461 Rev.10 Page 2/4
http://www.m-system.co.jp/
MODEL: FPP
OUTPUT LOGIC
VOLTAGE PULSE
OUTPUT
OPEN COLLECTOR or
PHOTO MOSFET RELAY PULSE OUTPUT
INPUT TYPE
INPUT
H
H
OFF
Voltage Pulse
L
L
ON
OFF
H
OFF
Mechanical Contact
Open Collector
ON
L
ON
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
1
2
15
(.59)
DIN RAIL
35mm wide
3
4
2–4.5 (.18)
HOLE
15 (.59) deep
5
6
8–M3.5
SCREW
7
8
26 (1.02)
107 (4.21)
137 (5.39)
26 (1.02)
[3.3 (.13)]
•When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Isolation
*
Waveform
Shaper
Output
Driver
+
–
1
2
3
4
5
6
7
8
+
Timer
INPUT
OUTPUT
POWER
–
SENSOR EXCITATION
+
12V Supply
U(+)
V(–)
Base Socket
* Timer is provided for low frequency open collector or photo MOSFET relay pulse output.
Input Connection Examples
Output Connection Examples
■ Mechanical Contact or Open Collector ■ Open Collector
■ Photo MOSFET Relay Pulse
• AC Powered
Relay or
Counter Coil
+
–
–
+
+
–
+
1
2
3
+
–
+
–
5
6
5
6
Varistor or Spark
Quenching Circuit
LOAD
+12V
PWR
U
4kΩ
■ Voltage Pulse
• DC Powered
Relay or
Counter Coil
■ Voltage Pulse
5
6
+
–
+
–
5
6
Spark Quenching
Diode
+
–
–
+
+
–
+
1
2
3
LOAD
+12V
PWR
FPP SPECIFICATIONS
ES-1461 Rev.10 Page 3/4
http://www.m-system.co.jp/
MODEL: FPP
Specifications are subject to change without notice.
FPP SPECIFICATIONS
ES-1461 Rev.10 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明