FAS-55-R/Q [MSYSTEM]
Space-saving Plug-in Signal Conditioners F-UNIT;![FAS-55-R/Q](http://pdffile.icpdf.com/pdf2/p00354/img/icpdf/FAS-52-K_2175899_icpdf.jpg)
型号: | FAS-55-R/Q |
厂家: | ![]() |
描述: | Space-saving Plug-in Signal Conditioners F-UNIT |
文件: | 总4页 (文件大小:132K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: FAS
Space-saving Plug-in Signal Conditioners F-UNIT
[2] OUTPUT
1: Single (SPDT); Hi in power failure
2: Single (SPDT); Lo in power failure
5: Hi/Lo (N.O.); OFF in power failure
6: Hi/Lo (N.C.); OFF in power failure
0: Specify
DC ALARM
Functions & Features
• Providing relay contact closures at preset DC input levels
• Single or dual (Hi/Lo) trip
• Multi-turn screwdriver setpoint adjustments
• Enclosed relays
[3] POWER INPUT
• Relays can be powered 110 V DC
• High-density mounting
AC Power
K: 85 – 132 V AC
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
L: 170 – 264 V AC
Typical Applications
• Annunciator
(Operational voltage range 170 – 264 V, 47 – 66 Hz)
DC Power
• Various alarm applications
R: 24 V DC
26 (1.02)
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)
100
(3.94)
[4] OPTIONS
blank: none
137
(5.39)
/Q: With options (specify the specification)
mm (inch)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
MODEL: FAS–[1][2]–[3][4]
/C02: Polyurethane coating
ORDERING INFORMATION
• Code number: FAS-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. FAS-62-L/Q)
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
• Special input range (For code 0)
Use Ordering Information Sheet (No. ESU-1033) to specify
output code 0 specifications.
GENERAL SPECIFICATIONS
Construction: Plug-in
• Specify the specification for option code /Q
(e.g. /C01/S01)
Connection: M3.5 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
[1] INPUT
Current
Setpoint adjustments: Multi-turn screwdriver adjustments
(front); -5 – +105 % independently
A: 4 – 20 mA DC (Input resistance 250 Ω)
D: 0 – 20 mA DC (Input resistance 50 Ω)
G: 0 – 1 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 100 Ω)
Voltage
Hysteresis (deadband): Approx. 1 %
Front LEDs: Red LED turns on when the coil is energized.
Power ON timer: Relays de-energized for approx. 2 seconds
after power is turned on.
3: 0 – 1 V DC (Input resistance 1 MΩ min.)
4: 0 – 10 V DC (Input resistance 1 MΩ min.)
5: 0 – 5 V DC (Input resistance 1 MΩ min.)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
0: Specify voltage (See INPUT SPECIFICATIONS)
INPUT SPECIFICATIONS
■ DC Current:
Shunt resistor attached to the input terminals (0.5 W)
■ DC Voltage: 0 – 300 V DC
Minimum span: 1 V
FAS SPECIFICATIONS
ES-1481 Rev.11 Page 1/4
http://www.m-system.co.jp/
MODEL: FAS
Offset: Max. 1.5 times span
Input resistance: ≥ 1 MΩ
PERFORMANCE in percentage of span
Trip point repeatability: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 100 % at 90 % setpoint)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength
OUTPUT SPECIFICATIONS
■ Relay Contact: 100 V AC @ 1 A (cos ø = 1)
120 V AC @ 1 A (cos ø = 1)
240 V AC @ 0.5 A (cos ø = 1)
Power input code R:
30 V DC @ 1 A (resistive load)
1000 V AC @ 1 minute (input to output)
2000 V AC @ 1 minute (input or output or power to ground)
500 V AC @ 1 minute (I/O to power)
Maximum switching voltage: 380 V AC or 125 V DC
Maximum switching power: 120 VA or 30 W
Minimum load: 5 V DC @ 10 mA
Power input code K, L, P:
Mechanical life: 5 x 10 cycles
7
1000 V AC @ 1 minute (input to output)
2000 V AC @ 1 minute (input or output or power to ground)
1500 V AC @ 1 minute (I/O to power)
For maximum relay life with inductive loads, external
protection is recommended.
Alarm Trip Operation Terminal No. in parentheses
•Output Code : 1, 2
(3–5)ON
Output
(3–6)ON
Input
(%)
0
50
50
50
▲
100
100
100
Setpoint
•Output Code : 5
(3–5)ON
Hi Output
(3–6)ON
Lo Output
Input
(%)
0
▲
▲
Lo Setpoint
Hi Setpoint
•Output Code : 6
(3–5)ON
Hi Output
(3–6)ON
Lo Output
Input
(%)
0
▲
▲
Lo Setpoint
Hi Setpoint
Trip Operation in Power Failure
• Output Code 1: Terminals 3 – 5 turn ON
• Output Code 2: Terminals 3 – 6 turn ON
• Output Code 5, 6: both relays turn OFF
INSTALLATION
Power input
•AC: Approx. 4.5 VA
•DC: 24 V approx. 70 mA
110 V approx. 20 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail; Standard Rack Mounting
Frame BX-16H available
Weight: 180 g (0.40 lb)
FAS SPECIFICATIONS
ES-1481 Rev.11 Page 2/4
http://www.m-system.co.jp/
MODEL: FAS
EXTERNAL VIEW
Single Alarm or
Dual High Setpoint Adj.
Single or Dual High LED
*Dual Low LED
*Dual Low Setpoint Adj.
*Not provided for Single Alarm.
EXTERNAL DIMENSIONS unit: mm (inch)
CLAMP
(top & bottom)
7.8 (.31)
1
2
15
(.59)
DIN RAIL
35mm wide
3
4
2–4.5 (.18)
HOLE
15 (.59) deep
5
6
8–M3.5
SCREW
7
8
26 (1.02)
107 (4.21)
137 (5.39)
26 (1.02)
[3.3 (.13)]
•When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS unit: mm (inch)
INPUT RESISTOR
(model: REM)
1
2
3
4
5
6
7
8
Input shunt resistor attached
for current input.
FAS SPECIFICATIONS
ES-1481 Rev.11 Page 3/4
http://www.m-system.co.jp/
MODEL: FAS
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
■ SINGLE ALARM
■Relay Protection
•AC Powered
ADJ.
Inductive
Load (Coil)
**
5
Varistor or Spark
Quenching Circuit
Low Drift
Amplifier
LOAD
+
–
1
2
4
Ry
Comparator
*
6
3
7
8
OUTPUT
POWER
INPUT
R
U
•DC Powered
Inductive
Load (Coil)
U(+)
V(–)
Diode, Varistor or
CR Circuit
LOAD
Base Socket
* Input shunt resistor attached for current input.
**Relay status is determined by output codes.
■ DUAL ALARM
HI ADJ. LO ADJ.
**
**
5
6
3
7
8
HI
Ry
Low Drift
Amplifier
+
–
1
2
4
Comparator
*
OUTPUT
POWER
INPUT
R
LO
Ry
U(+)
V(–)
Base Socket
* Input shunt resistor attached for current input.
**Relay status is determined by output codes.
Specifications are subject to change without notice.
FAS SPECIFICATIONS
ES-1481 Rev.11 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明