6BTS1-083A1 [MSYSTEM]
Field-mounted Two-wire Signal Conditioners 6B-UNIT;型号: | 6BTS1-083A1 |
厂家: | M-SYSTEM |
描述: | Field-mounted Two-wire Signal Conditioners 6B-UNIT |
文件: | 总4页 (文件大小:119K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: 6BTS1
3: PG 13.5
Field-mounted Two-wire
Signal Conditioners 6B-UNIT
[3] ENCLOSURE MATERIAL
A: Diecast aluminum
THERMOCOUPLE TRANSMITTER
(field-configurable; non-linearization)
Functions & Features
S: Stainless steel casting
• Accepts direct input from a thermocouple and providing a
standard 4 – 20 mA DC signal
[4] MOUNTING BRACKET
0: Without
• Field selectable temperature range
• Burnout protection
1: With
• Cold junction compensation
[5] OPTIONS
Burnout
• Rugged outdoor enclosure: stainless steel selectable
blank: Upscale burnout
/BL: Downscale burnout
PACKAGE INCLUDES...
• Mounting screws
Bolt (M8 x 15): 4
Spring washer for M8: 4
Material: Stainless steel 304
• Mounting bracket assembly (option):
Mounting bracket: 1
M10 U-bolt: 2
MODEL: 6BTS1–0[1][2][3][4][5]
Nut for M10: 4
Spring washer for M10: 4
Material: Stainless steel 304
Applicable pipe: 1 1/2” min.; 2” max.
ORDERING INFORMATION
• Code number: 6BTS1-0[1][2][3][4][5]
Specify a code from below for each of [1] through [5].
(e.g. 6BTS1-020A1/BL)
GENERAL SPECIFICATIONS
Degree of protection: NEMA 4X, IP66/IP67
Wiring conduit: See ‘Ordering information.’
Electrical connection: M3 screw terminals
(torque 0.6 N·m)
• Temperature range (e.g. 0 – 800°C)
SAFETY APPROVAL
0: None
Materials
• Transmitter housing: Diecast aluminum
Screw terminals: Nickel-plated steel
• Enclosure: Diecast aluminum or stainless steel casting
(equivalent to type 316); silver color, epoxy resin coated
Isolation: Input to output to outdoor enclosure
Output limit: Approx. 120 %
[1] INPUT THERMOCOUPLE
1: (PR) (Usable range 0 to 1760°C, 32 to 3200°F)
2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)
3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)
4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)
5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)
6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)
7: R (Usable range -50 to +1760°C, -58 to +3200°F)
8: S (Usable range -50 to +1760°C, -58 to +3200°F)
0: Specify
Zero adjustment: -3 – +15 % (behind the access cover)
Span adjustment: 90 to 110 % (behind the access cover)
Linearization: Not provided
Cold junction compensation: CJC sensor attached to the
input terminals
[2] WIRING CONDUIT
0: G 1/2
INPUT SPECIFICATIONS
Minimum span: 3 mV
1: 1/2 NPT
Offset: Max. 1.5 times span
Input resistance: 20 kΩ minimum
2: M20 × 1.5
6BTS1 SPECIFICATIONS
ES-8861 Rev.4 Page 1/4
http://www.m-system.co.jp/
MODEL: 6BTS1
Burnout sensing: 0.1 μA
Minimum temperature span (in °C)
(PR): min. span 370°C
K (CA): min. span 75°C
E (CRC): min. span 50°C
J (IC): min. span 60°C
T (CC): min. span 75°C
B (RH): min. span 780°C
R: min. span 360°C
Approx. 0.78 kg (1.72 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
Cold junction compensation error
(at 25°C ±10°C or 77°F ±18°F)
K, E, J & T: ±0.5°C or ±0.9°F
S, R & PR: ±1°C or ±1.8°F
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
±0.02 %/°C (±0.01 %/°F) at spans ≤ 10 mV
Response time: ≤ 0.5 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
S: min. span 380°C
Minimum temperature span (in °F)
(PR): min. span 670°F
K (CA): min. span 140°F
E (CRC): min. span 90°F
J (IC): min. span 110°F
T (CC): min. span 140°F
B (RH): min. span 1410°F
R: min. span 650°F
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(input to output)
1500 V AC @ 1 minute (input or output to outdoor
enclosure)
S: min. span 690°F
Note: For the temperatures that range below 0°C, the
transmitter may partially not satisfy the described accuracy.
Consult factory.
OUTPUT SPECIFICATIONS
Output: 4 – 20 mA DC
Load resistance vs. supply voltage: Load Resistance (Ω) =
(Supply Voltage (V) – 13 (V)) ÷ 0.02 (A)
(including leadwire resistance)
750
600
450
300
150
0
10 13 15
20
25 28
SUPPLY VOLTAGE [V]
(550Ω maximum at 24V DC)
INSTALLATION
Supply voltage: 13 – 28 V DC
Operating temperature: -5 to +70°C (23 to 158°F)
Weight:
• Unit
Approx. 1.5 kg (2.9 lb), aluminium
Approx. 4.2 kg (8.8 lb), stainless steel
• Mounting bracket assembly (option)
6BTS1 SPECIFICATIONS
ES-8861 Rev.4 Page 2/4
http://www.m-system.co.jp/
MODEL: 6BTS1
EXTERNAL DIMENSIONS unit: mm (inch)
MOUNTING BRACKET
(optional)
92 (3.62)
110 (4.33)
4–M8, 12 deep
SPACE REQUIRED TO REMOVE COVER
114 (4.49)
110 (4.33)
2–G 1/2, 1/2NPT, M20x1.5 or PG13.5
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Burnout
comp. leadwire
Z
S
Isolation
24V DC
LOAD
T / C
+
+
5
Low Drift
Amplifier
Output
Driver
+
1
OUTPUT
–
6
–
4 – 20mA DC
metal leg
–
2
3
4
CJC
SENSOR
*
red
black
Cold Junction
Compensation
model: CJM
*Deleted with B thermocouple
6BTS1 SPECIFICATIONS
ES-8861 Rev.4 Page 3/4
http://www.m-system.co.jp/
MODEL: 6BTS1
Specifications are subject to change without notice.
6BTS1 SPECIFICATIONS
ES-8861 Rev.4 Page 4/4
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明