6AC-A5 [MSYSTEM]
Field-mounted Two-wire Signal Conditioners 6-UNIT;![6AC-A5](http://pdffile.icpdf.com/pdf2/p00355/img/icpdf/6AC-AB_2180839_icpdf.jpg)
型号: | 6AC-A5 |
厂家: | ![]() |
描述: | Field-mounted Two-wire Signal Conditioners 6-UNIT |
文件: | 总3页 (文件大小:101K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: 6AC
A6: 0 – 120 V AC (Input resistance 200 kΩ min.)
Field-mounted Two-wire Signal Conditioners 6-UNIT
A7: 0 – 150 V AC (Input resistance 200 kΩ min.)
A8: Specify voltage (See INPUT SPECIFICATIONS)
(0 % input must be 0 V.)
AC TRANSMITTER
Functions & Features
• Converting an alternating current/voltage into an isolated
4 – 20 mA DC signal
RELATED PRODUCTS
• Outdoor enclosure (model: 6BX-E)
• True RMS sensing
• Rugged enclosure
PACKAGE INCLUDES...
• Mounting adapter
Typical Applications
• Converting a large AC current in combination with a shunt
resistor, or a narrow span AC voltage
surface mounting adapter plate (model: A-01)
Spring clip (model: A-02)
DIN rail mounting plate (model: A-31)
76
Note: When a mounting adapter is required, specify
mounting adapter. Not included without specifying.
When using in combination with outdoor enclosure (model:
6BX-E), use a spring clip (model: A-02).
(2.99) DIA.
52.5
(2.07)
GENERAL SPECIFICATIONS
Connection: M3 screw terminals (torque 0.6 N·m)
Screw terminal: Nickel-plated steel
60.9 (2.40)
mm (inch)
Housing material: Diecast aluminum
Isolation: Input to output
MODEL: 6AC–[1]
Zero adjustment: -5 to +5 % (behind the access cover)
Span adjustment: 95 to 105 % (behind the access cover)
ORDERING INFORMATION
• Code number: 6DV-[1]
INPUT SPECIFICATIONS
Frequency: 40 Hz min., 1 kHz max.
■ AC Current: 0 – 1 A AC; input resistor incorporated
Minimum span: 1 mA
Specify a code from below for [1].
(e.g. 6AC-A1)
• Special input range (For codes AZ & A8)
• Mounting adapter (e.g. surface mounting adapter plate,
model: A-01)
Input resistance
Span 1 mA: 1 kΩ
Note: When a mounting adapter is required, specify
mounting adapter. Not included without specifying.
Span ≤ 2 mA: 500 Ω
Span ≤ 5 mA: 200 Ω
Span ≤ 10 mA: 100 Ω
Span ≤ 20 mA: 50 Ω
[1] INPUT
Current
Span ≤ 50 mA: 20 Ω
Span ≤ 100 mA: 10 Ω
AA: 0 – 10 mA AC (Input resistance 100 Ω)
AB: 0 – 50 mA AC (Input resistance 20 Ω)
AC: 0 – 100 mA AC (Input resistance 10 Ω)
AD: 0 – 500 mA AC (Input resistance 1 Ω)
AZ: Specify current (See INPUT SPECIFICATIONS)
(0 % input must be 0 mA.)
Span ≤ 500 mA: 1 Ω
Span ≤ 1 A: 0.5 Ω
■ AC Voltage: 0 – 250 V AC
Minimum span: 50 mV
Input resistance: (Input Span: Input Resistance)
50 mV – 1.5 V : 10 k (Ω minimum)
≥ 1.5 V : 200 k
Voltage
A1: 0 – 100 mV AC (Input resistance 10 kΩ min.)
A2: 0 – 500 mV AC (Input resistance 10 kΩ min.)
A3: 0 – 1 V AC (Input resistance 10 kΩ min.)
A4: 0 – 5 V AC (Input resistance 200 kΩ min.)
A5: 0 – 10 V AC (Input resistance 200 kΩ min.)
6AC SPECIFICATIONS
ES-4236 Rev.9 Page 1/3
http://www.m-system.co.jp/
MODEL: 6AC
OUTPUT SPECIFICATIONS
Output: 4 – 20 mA DC
Load resistance vs. supply voltage: Load Resistance (Ω) =
(Supply Voltage (V) – 13 (V)) ÷ 0.02 (A)
(including leadwire resistance)
750
600
450
300
150
0
10 13 15
20
25 28
SUPPLY VOLTAGE [V]
(550Ω maximum at 24V DC)
INSTALLATION
Supply voltage: 13 – 28 V DC
Operating temperature: -5 to +70°C (23 to 158°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN rail with mounting plate A-31; surface
mounting with adapter plate A-01; spring clip A-02 for 3-
inch hub
Weight: 220 g (0.49 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.4 %
Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Ripple: 0.5 %p-p max.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(input to output)
1500 V AC @ 1 minute
(input or output to ground)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
4–M3 (.12) TAP
6 (.24) deep
1
2
5
3
6
4
1 (.04)
76 (2.99) dia.
40 (1.57)
46 (1.81)
52.5 (2.07)
6AC SPECIFICATIONS
ES-4236 Rev.9 Page 2/3
http://www.m-system.co.jp/
MODEL: 6AC
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Isolation
24V DC
LOAD
AC
Amplifier
R.M.S
Operation
Output
Driver
1
2
3
4
5
6
+
–
INPUT
OUTPUT
4 – 20mA DC
Specifications are subject to change without notice.
6AC SPECIFICATIONS
ES-4236 Rev.9 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明