61D-081-K [MSYSTEM]
Field Network Modules 61-UNIT Series;
| 型号： | 61D-081-K |
| 厂家： | 
M-SYSTEM |
| 描述： | Field Network Modules 61-UNIT Series |
| 文件： | 总4页 (文件大小：108K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: 61D
Field Network Modules 61-UNIT Series
[4] OPTIONS
blank: none
/Q: With options (specify the specification)
ANALOG I/O MODULE
(DeviceNet)
Functions & Features
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Interfacing analog I/O signals from/to Mini-M, Pico-M and
other signal conditioner modules with DeviceNet
• Saving power and I/O wiring inside an instrumentation
panel
/C02: Polyurethane coating
/C03: Rubber coating
50
(1.97)
RELATED PRODUCTS
• Installation Base (model: M2BS2)
• Installation Base (model: M8BS2)
• Programming Unit (model: PU-2x)
100
(3.94)
GENERAL SPECIFICATIONS
Construction: Plug-in
115
(4.53)
mm (inch)
Connection
DeviceNet: Euro type connector terminal (applicable
wire size: 0.2 to 2.5 mm , stripped length 7 mm)
2
I/O: Via the Installation Base (model: MxBS2)
Power input: Via the Installation Base (model: MxBS2)
Housing material: Flame-resistant resin (black)
Isolation: I/O to DeviceNet to power
MODEL: 61D-[1][2]-[3][4]
ORDERING INFORMATION
• Code number: 61D-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. 61D-161-K/Q)
Power indicator: Green LED turns on with power supplied.
DeviceNet COMMUNICATION
Transmission cable: Approved for DeviceNet
Node address setting: DIP switch; 00 – 63
Baud rate setting: DIP switch
• Specify the specification for option code /Q
(e.g. /C01)
[1] NO. OF CHANNELS
04: 4 points
MS (Module Status) indicator: Bi-color (green/red) LED
indicates device status.
08: 8 points
NS (Network Status) indicator: Bi-color (green/red)
LED indicates status of the communication link.
16: 16 points
[2] I/O TYPE
1: Input
INPUT SPECIFICATIONS
■ Analog Input
2: Output
Input range: 1 – 5 V DC
Input resistance: ≥ 1 MΩ
(Each input must be isolated by signal conditioners. Non-
isolated modules such as M2BW and M8BW are not usable.)
A/D conversion
[3] POWER INPUT
AC Power
K: 85 – 132 V AC
Moving averaging: 4 samples
(Operational voltage range 85 – 132 V, 47 – 66 Hz)
(CE not available)
Sampling rate: 160 ms
A/D conversion output: 16-bit binary
Signal range 0 – 100 % is converted into hexadecimal 0000
– 1770 (0 – 6000). -15 to 0 % is represented by 2’s
complements.
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
(Specify power suffix code R (24 V DC) when the UNIT is to be
combined with the M8BS2.)
Overall range is represented by hexadecimal FC7C – 1AF4
(-900 – +6900), for -15 – +115 %.
61D SPECIFICATIONS
ES-6629 Rev.14 Page 1/4
https://www.m-system.co.jp/
MODEL: 61D
Note: In the firmware version 3.00 or later, analog input
range 0 – 100% can be converted into hexadecimal 0000 –
2710 (0 – 10000).
STANDARDS & APPROVALS
EU conformity:
EMC Directive
In addition, negative values of analog input range -15 to 0%
can be converted into signed absolute values.
Refer to the instruction manual for details.
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
OUTPUT SPECIFICATIONS
■ Analog Output
Output range: 1 – 5 V DC
Load resistance: 20 kΩ minimum
(Output must be isolated with signal conditioners.
When the transmission line is open, the last value sampled
before failure is held. Non-isolated modules such as M2BW
and M8BW are not usable. )
D/A conversion output: 16-bit binary
Signal range 0 – 100 % is converted into hexadecimal
0000 – 1770 (0 – 6000). -15 to 0 % is represented by 2’s
complements.
Overall range is represented by hexadecimal FC7C – 1AF4
(-900 – +6900), for -15 – +115 %.
Note: In the firmware version 3.00 or later, analog output
range 0 – 100% can be converted into hexadecimal 0000 –
2710 (0 – 10000).
In addition, negative values of analog output range -15 to
0% can be converted into signed absolute values.
Refer to the instruction manual for details.
INSTALLATION
Power consumption
•AC: Approx. 4 VA
•DC: Approx. 4 W (160 mA)
Supply voltage to network: 11 – 25 V DC supplied through
the network terminal block
Supply current to network: 60 mA max. @ 24 V
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: MxBS2)
Weight: 250 g (0.55 lb)
PERFORMANCE in percentage of span
A/D conversion: ±0.1 %
D/A conversion: ±0.1 %
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Permissible power failure duration: ≤ 10 msec.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(I/O to DeviceNet to power)
61D SPECIFICATIONS
ES-6629 Rev.14 Page 2/4
https://www.m-system.co.jp/
MODEL: 61D
EXTERNAL VIEW
PU-2x Modular Jack
Power LED
MS Indicator LED
NS Indicator LED
PWR
MS
NS
NA0
NA1
NA2
NA3
NA4
NA5
Node
Address
Setting
Baud Rate
Setting
DR0
DR1
Euro Type Connector Terminal
for DeviceNet
ON
EXTERNAL DIMENSIONS unit: mm [inch]
2–M3 SCREWS
12
(.47)
50 (1.97)
38 min.
(1.50)
103 (4.06)
61D SPECIFICATIONS
ES-6629 Rev.14 Page 3/4
https://www.m-system.co.jp/
MODEL: 61D
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
INDICATOR
LED
DIP SW
V+
CAN_H
Drain
CAN_L
V–
To Other
DeviceNet
Devices
DeviceNet
Comm. CPU
A / D
or
To
Installation
Base
D / A
Conv.
I / O
CPU
PU-2x
MODULAR JACK
SERIAL
TRANSMISSION
LINE
■ CABLE IDENTIFICATION
The following table defines wire insulation colors and
designations. The terminal block is labeled also in
the same colors so that the correct assignment can
be confirmed.
COLOR
black
blue
DESIG.
V –
DESCRIPTION
Power (–)
CAN_L
Drain
CAN_H
V +
Signal Low
Shield
bare
white
red
Signal High
Power (+)
Specifications are subject to change without notice.
61D SPECIFICATIONS
ES-6629 Rev.14 Page 4/4
https://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明