18JR-066-R 概述
Rack-mounted DCS Signal Conditioners 18-RACK
18JR-066-R 数据手册
通过下载18JR-066-R数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MODEL: 18JR
Rack-mounted DCS Signal Conditioners 18-RACK
OUTPUT 1
Voltage
6: 1 – 5 V DC (Load resistance 2000 Ω min.)
RTD CONVERTER
(field-programmable)
Functions & Features
OUTPUT 2
• Accepting direct input from an RTD and providing two
standard process signals
Voltage
6: 1 – 5 V DC (Load resistance 2000 Ω min.)
• Micro-processor based
• Field-programmable temperature range
• Linearization
POWER INPUT
DC Power
• Burnout protection
R: 24 V DC
• Loop testing via hand-held programmer PU-2x
• Second channel output available at the front terminals
and at the Standard Rack connector
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[2] OPTIONS
Burnout
Typical Applications
blank: Upscale burnout
/BL: Downscale burnout
• Ideal for quick spare part
RELATED PRODUCTS
• Programming Unit (model: PU-2x)
• PC configurator software (model: JXCON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
MODEL: 18JR–[1]66–R[2]
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals on the front and connector on the rear; terminal
cover provided
ORDERING INFORMATION
• Code number: 18JR-[1]66-R[2]
Specify a code from below for each of [1] and [2].
(e.g. 18JR-166-R/BL)
Connection
• Temperature range (e.g. 0 – 500°C)
Input: M3.5 screw terminals (torque 0.8 N·m)
Output 1: Connector
Output 2: M3.5 screw terminals (torque 0.8 N·m)
and connector
[1] INPUT RTD (2- or 3-wire)
1: JPt 100 (JIS'89)
Power input: Supplied from connector
Screw terminal: Nickel-plated steel
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 30°C, 54°F)
3: Pt 100 (JIS'89)
Isolation: Input to output 1 to output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Linearization: Standard
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 30°C, 54°F)
4: Pt 100 (JIS'97, IEC)
(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 30°C, 54°F)
5: Pt 50 Ω (JIS'81)
Adjustments: Programming Unit (model: PU-2x); RTD type
(between Pt 100 and JPt 100 only), temp. range, zero and
span, simulating output, etc.
(Usable range: -200 to +500°C, -328 to +932°F; min.span: 60°C, 108°F)
6: Ni 508.4 Ω
(Refer to the users manual of JXCON for the adjustments
configurable with JXCON.)
(Usable range: -50 to +200°C, -58 to +392°F; min.span: 20°C, 36°F)
0: Specify
Note: Consult M-System for 2-wire RTD
18JR SPECIFICATIONS
ES-1864 Rev.9 Page 1/3
http://www.m-system.co.jp/
MODEL: 18JR
INPUT SPECIFICATIONS
Maximum leadwire resistance: 20 Ω per wire (3-wire)
Sensing current: 2 mA
If not specified, the input range is shown below.
1: JPt 100 (JIS '89) 0 – 100°C
3: Pt 100 (JIS '89) 0 – 100°C
4: Pt 100 (JIS '97, IEC) 0 – 100°C
5: Pt 50 Ω (JIS '81) 0 – 200°C
6: Ni 508.4 Ω 0 – 100°C
INSTALLATION
Current consumption: Approx. 60 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 18BXx or 18KBXx
Weight: 150 g (0.33 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 % or ±0.1°C (±0.18°F), whichever is greater
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input to output 1 or output 2 or power)
500 V AC @ 1 minute
(output 1 to output 2 to power)
1500 V AC @ 1 minute
(input or output or power to ground)
EXTERNAL DIMENSIONS unit: mm (inch)
2–M3
SCREW
8–M3.5
7 (.28)
SCREW
7 (.28)
24 (.94)
32 (1.26)
78 (3.07)
18JR SPECIFICATIONS
ES-1864 Rev.9 Page 2/3
http://www.m-system.co.jp/
MODEL: 18JR
TERMINAL ASSIGNMENTS
7
8
5
6
1
2
3
4
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Burnout
RTD
1
2
3
4
7
8
A
B
B
Z
S
Isolation
Low Drift
Amplifier
Digital
Computation
Output
Driver
5
6
+
–
OUTPUT 2
Reference
Resistor
Constant
Current
Output
Driver
OUTPUT 1
OUTPUT 2
POWER
MODULAR JACK
PU-2x
SERIAL TRANSMISSION LINE
Specifications are subject to change without notice.
18JR SPECIFICATIONS
ES-1864 Rev.9 Page 3/3
http://www.m-system.co.jp/
18JR-066-R 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
18JR-066-R/BL | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-166-R | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-166-R/BL | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-366-R | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-366-R/BL | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-466-R | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-466-R/BL | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-566-R | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-566-R/BL | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 | |
18JR-666-R | MSYSTEM | Rack-mounted DCS Signal Conditioners 18-RACK | 获取价格 |
18JR-066-R 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6