17TS-25-R/BN [MSYSTEM]
Rack-mounted Power Transducers 17-RACK;型号: | 17TS-25-R/BN |
厂家: | M-SYSTEM |
描述: | Rack-mounted Power Transducers 17-RACK |
文件: | 总3页 (文件大小:94K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: 17TS
Rack-mounted Power Transducers 17-RACK
OUTPUT
Voltage
6: 1 – 5 V DC (Load resistance 2000 Ω min.)
THERMOCOUPLE CONVERTER
Functions & Features
• Accepting direct input from a thermocouple and providing
a standard process signal
POWER INPUT
DC Power
• 5-segment linearization
R: 24 V DC
• Burnout protection
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
• High-accuracy cold junction compensation
[2] OPTIONS
Burnout
Typical Applications
blank: Upscale burnout
/BL: Downscale burnout
/BN: No burnout
• High-accuracy cold junction compensation benefits narrow
span measurements
• 0.1 μA burnout sensing enables long distance
transmission with minimum offset drifts
• Electric furnace (isolation)
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals on the front and connector on the rear; terminal
cover provided
• No burnout type can connect to a single T/C in parallel
with a recorder
Connection:
Input: M3.5 screw terminals (torque 0.8 N·m)
Output: Connector
Power input: Supplied from connector
Screw terminal: Nickel-plated steel
Isolation: Input to output to power
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
Linearization: Standard
Cold junction compensation: CJC sensor attached to the
input terminals (B thermocouple is without CJC as standard)
MODEL: 17TS–[1]6–R[2]
ORDERING INFORMATION
• Code number: 17TS-[1]6-R[2]
INPUT SPECIFICATIONS
Input resistance: 20 kΩ minimum
Burnout sensing: 0.1 μA
Minimum span: 3 mV
Offset: Max. 1.5 times span
Minimum span (in °C)
(PR): 370°C
Specify a code from below for each [1] and [2].
(e.g. 17TS-26-R/BL)
• Temperature range (e.g. 0 – 800°C)
K (CA): 75°C
[1] INPUT THERMOCOUPLE
E (CRC): 50°C
1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)
2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)
3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)
4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)
5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)
6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)
7: R (Usable range -50 to +1760°C, -58 to +3200°F)
8: S (Usable range -50 to +1760°C, -58 to +3200°F)
N: N (Usable range -270 to +1300°C, -454 to +2372°F)
0: Specify
J (IC): 60°C
T (CC): 75°C
B (RH): 780°C
R: 360°C
S: 380°C
N: 110°C
Minimum span (in °F)
(PR): 670°F
K (CA): 140°F
http://www.m-system.co.jp/
17TS SPECIFICATIONS
ES-2912 Rev.0 Page 1/3
MODEL: 17TS
E (CRC): 90°F
J (IC): 110°F
T (CC): 140°F
B (RH): 1410°F
R: 650°F
S: 690°F
N: 200°F
For the temperatures that range below 0°C, the transmitter
may partially not satisfy the described accuracy. Consult
factory.
INSTALLATION
Current consumption: Approx. 35 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 40 to 85 % RH (non-condensing)
Mounting: Standard Rack 17BXE
Weight: 150 g (0.33 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.4 % (at over 400°C or 750°F for R, S and PR;
over 770°C or 1420°F for B)
Cold junction compensation error
(at 20°C ±10°C or 68°F ±18°F)
K, E, J, T, N: ±0.5°C or ±0.9°F
S, R, PR: ±1°C or ±1.8°F
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
(at over 400°C or 750°F for R, S and PR; over 770°C or
1420°F for B)
Response time: ≤ 0.5 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input to output or power)
500 V AC @ 1 minute (outut to power)
1500 V AC @ 1 minute (input or output or power to ground)
DIMENSIONS unit: mm (inch)
2–M3
SCREW
8–M3.5
7 (.28)
SCREW
7 (.28)
24 (.94)
32 (1.26)
78 (3.07)
http://www.m-system.co.jp/
17TS SPECIFICATIONS
ES-2912 Rev.0 Page 2/3
MODEL: 17TS
TERMINAL ASSIGNMENTS
7
8
5
6
1
2
3
4
r
b
CJC SENSOR (model: CJM)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Burnout
Protection
comp. leadwire
Z
S
Isolation
T / C
+
+
Low Drift
Amplifier
Voltage/
Duty Cycle
Output
Driver
1
Linearizer
OUTPUT
POWER
–
−
2
3
4
5
6
7
8
CJC
SENSOR
*
CJC Sensing
Volt. Generator
red
(model: CJM)
black
*Deleted with Option /B thermocouple.
Specifications are subject to change without notice.
http://www.m-system.co.jp/
17TS SPECIFICATIONS
ES-2912 Rev.0 Page 3/3
相关型号:
©2020 ICPDF网 联系我们和版权申明