17PE-66-R [MSYSTEM]
Rack-mounted Power Transducers 17-RACK;型号: | 17PE-66-R |
厂家: | M-SYSTEM |
描述: | Rack-mounted Power Transducers 17-RACK |
文件: | 总2页 (文件大小:89K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: 17PE
Rack-mounted Power Transducers 17-RACK
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals on the front and connector on the rear; terminal
cover provided
PT TRANSMITTER
Functions & Features
Connection
• Converting an alternating voltage from a potential
(voltage) transformer into a standard process signal
• Minimum ripple
Input: M3.5 screw terminals (torque 0.8 N·m)
Output: Connector
Auxiliary power: Supplied from connector
Screw terminal: Nickel-plated steel
Isolation: Input to output to auxiliary power
Input waveform: Up to 15 % of 3rd harmonic content
Overrange output: 0 to 120 %
Typical Applications
• Centralized monitoring and control of power line and
power supply voltage measured at switch boards
• Monitoring abnormal voltage drops for detecting overload
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
INPUT SPECIFICATIONS
Frequency: 50 or 60 Hz
Input burden: 0.5 VA
Overload capacity: 200 % of rating for 10 sec., 120 %
continuous
Operational range: 0 – 120 % of rating
OUTPUT SPECIFICATIONS
MODEL: 17PE–[1]6-R
• Operation Diagram (example)
OUT
5V
ORDERING INFORMATION
• Code number: 17PE-[1]6-R
Specify a code from below for [1].
(e.g. 17PE-56-R)
3
1
0
150
300V
IN
[1] INPUT
Voltage
INSTALLATION
Auxiliary power supply
1: 0 – 110 V AC
2: 0 – 220 V AC
5: 0 – 150 V AC
6: 0 - 300 V AC
Current consumption: Approx. 35 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 40 to 85 % RH (non-condensing)
Mounting: Standard Rack 17BXE
OUTPUT
Voltage
Weight: 150 g (0.33 lb)
6: 1 – 5 V DC (Load resistance 2000 Ω min.)
PERFORMANCE in percentage of span
Accuracy: ±0.4 % (at 23°C ±10°C or 73.4°F ±18°F, 45 – 65
Hz)
AUXILIARY POWER SUPPLY
DC Power
Response time: ≤ 1 sec. (0 – 100 % ±1 %)
Ripple: 1 %p-p max.
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute (output to
auxiliary power)
http://www.m-system.co.jp/
17PE SPECIFICATIONS
ES-2938 Rev.0 Page 1/2
MODEL: 17PE
1500 V AC @ 1 minute (input to output or auxiliary power to
ground)
CONNECTION DIAGRAM
SOURCE
VT
FUSE
U
V
u
v
1
2
OUTPUT
FUSE
AUXILIARY
POWER
LOAD
DIMENSIONS unit: mm (inch)
2–M3
SCREW
8–M3.5
7 (.28)
SCREW
7 (.28)
24 (.94)
32 (1.26)
78 (3.07)
TERMINAL ASSIGNMENTS
7
8
5
6
1
2
3
4
Specifications are subject to change without notice.
http://www.m-system.co.jp/
17PE SPECIFICATIONS
ES-2938 Rev.0 Page 2/2
相关型号:
©2020 ICPDF网 联系我们和版权申明