10VP-260-R/A2S [MSYSTEM]
High-density Signal Conditioners 10-RACK;型号: | 10VP-260-R/A2S |
厂家: | M-SYSTEM |
描述: | High-density Signal Conditioners 10-RACK |
文件: | 总3页 (文件大小:94K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: 10VP
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
High-density Signal Conditioners 10-RACK
[3] OPTIONS (multiple selections)
Output 1
I/P TRANSDUCER
Functions & Features
blank: 0.2 - 1.0kgfcm
/A1S: 19.6 – 98.1 kPa
/A2S: 20 – 100 kPa
2
• Converting a DC input into a proportional standard
pneumatic signal
• Semiconductor pressure sensor in the feedback circuit
• High resolution
/A3S: 20.7 – 103.4 kPa
/A2: 0.2 – 1.0 bar
• No mounting position effect
/A3: 3 – 15 psig
Other Options
Typical Applications
blank: none
• Converting a 4 – 20 mA from a PID controller into a
pneumatic signal
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
RELATED PRODUCTS
• Standard rack with air manifold
The 10VP must be installed in a 10-Rack series rack with air
manifold (the model 10BXAN is not available).
MODEL: 10VP-[1][2]0-R[3]
ORDERING INFORMATION
• Code number: 10VP-[1][2]0-R[3]
Specify a code from below for each [1] through [3].
(e.g. 10VP-260-R/A2S/Q)
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear
• Specify the specification for option code /Q
(e.g. /C01)
Connection
Input: M3.5 screw terminals (torque 0.8 N·m) and card-
edge connector
Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female
(torque ≤ 12 N·m)
[1] PNEUMATIC CONNECTION
2: Rc 1/4"
Power input: Supplied from card-edge connector
Material
5: Rc 1/8" fitting
7: 1/4" NPT fitting
Housing: Flame-resistant resin (black)
Base: Die cast aluminium
[2] INPUT
Current
Screw terminals: Nickel-plated steel
Isolation: Input to power
A: 4 – 20 mA DC (Input resistance 250 Ω)
Voltage
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
6: 1 – 5 V DC (Input resistance 1 MΩ min.)
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
OUTPUT 2
0: None
OUTPUT SPECIFICATIONS
■ Output:
POWER INPUT
DC Power
19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm
2
R: 24 V DC
20 – 100 kPa, 0.2 – 1.0 bar
http://www.m-system.co.jp/
10VP SPECIFICATIONS
ES-0821 Rev.16 Page 1/3
MODEL: 10VP
20.7 – 103.4 kPa, 3 – 15 psig
The output goes below 0 % if the input loop is open.
Maximum air delivery: 60 Nl/minute (2.1 SCFM)
Maximum air exhaust: 60 Nl/minute (2.1 SCFM)
INSTALLATION
Supply pressure: 140 kPa (1.4 kgf/cm , 1.4 bar, 20 psig)
2
±10 %. Use dry air containing no carbon black or other
foreign particles. To ensure reliability use an air filter (0.01
microns).
Air consumption: 6 Nl/minute (0.21 SCFM)
Current consumption: Approx. 30 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 10BXx
Weight: 300 g (0.66 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.3 % including linearity and repeatability
Linearity: ±0.2 %
Repeatability: 0.1 %
Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)
Response time: ≤ 3 sec. (0 – 90 %)
Mounting position effect: ±0.1 % (all dimensions)
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute (input to power)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
approx.
27 (1.06)
*
20 (.79)
2–4.3 (.17) dia.
MTG HOLE
[13 (.51)]
**FITTING
OUTPUT CONNECTION
Rc 1/4”, Rc 1/8”, 1/4” NPT
5
7
6
8
4–M3.5 SCREW
3 (.12)
25 (.98)
32 (1.26)
130 (5.12)
25 (.98)
* [ ] for Rc 1/8".
**Fitting provided for Rc 1/8" or 1/4" NPT connection.
8 (.31)
http://www.m-system.co.jp/
10VP SPECIFICATIONS
ES-0821 Rev.16 Page 2/3
MODEL: 10VP
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
SUPPLY
PRESSURE
Pilot
Valve
OUTPUT
Semiconductor
Pressure Sensor
Z
S
5
6
–
+
Deviation
Amplifier
+
–
7
8
Driver
*
INPUT
ELECTRO-MAGNETIC
FLAPPER
INPUT
POWER
*Input shunt resistor incorporated for current input.
Specifications are subject to change without notice.
http://www.m-system.co.jp/
10VP SPECIFICATIONS
ES-0821 Rev.16 Page 3/3
相关型号:
©2020 ICPDF网 联系我们和版权申明