10AS-51/C02 [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10AS-51/C02
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总4页 (文件大小：145K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10AS

High-density Signal Conditioners 10-RACK

[2] ALARM OUTPUT

1: Single (SPDT); Hi in power failure

2: Single (SPDT); Lo in power failure

DC ALARM

3: Dual (2 points SPDT); Hi in power failure

4: Dual (2 points SPDT); Lo in power failure

5: Hi/Lo (2 points SPDT); ON at alarm; OFF in power failure

7: Hi/Lo (2 points SPDT); ON at alarm and in power failure

8: Hi/Lo (2 points SPDT); OFF at alarm and in power failure

0: Specify

Functions & Features

• Providing relay contact closures at preset DC input levels

• Single or dual (Hi/Lo) trip

• Multi-turn screwdriver setpoint adjustments

Typical Applications

• Annunciator

• Various alarm applications

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

MODEL: 10AS–[1][2]–R[3]

/C03: Rubber coating

ORDERING INFORMATION

• Code number: 10AS-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. 10AS-62-R/Q)

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

Use Ordering Information Sheet (No. ESU-1033) to specify

output code 0 specifications.

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: M3.5 screw terminals (torque 0.8 N·m)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

• Special input range (For code 0)

• Specify the specification for option code /Q

(e.g. /C01)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

[1] INPUT

Current

Setpoint adjustments: Multi-turn screwdriver adjustments

(front); -5 – +105 % independently

A: 4 – 20 mA DC (Input resistance 250 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Voltage

Hysteresis (deadband): Approx. 1 %

Front LEDs: Red light turns on when the coil is energized.

Power ON timer: Relays de-energized for approx. 2 seconds

after power is turned on.

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

■ DC Voltage: 0 – 300 V DC

Minimum span: 1 V

Offset: Max. 1.5 times span

Input resistance: ≥ 1 MΩ

http://www.m-system.co.jp/

10AS SPECIFICATIONS

ES-0881 Rev.13 Page 1/4

MODEL: 10AS

OUTPUT SPECIFICATIONS

■ Relay Contact: 100 V AC @ 1 A (cos ø = 1)

120 V AC @ 1 A (cos ø = 1)

INSTALLATION

Current consumption: Approx. 80 mA with dual alarm

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

240 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 1 A (resistive load)

Maximum switching voltage: 380 V AC or 125 V DC

Maximum switching power: 120 VA or 30 W

Minimum load: 5 V DC @ 10 mA

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Trip point repeatability: ±0.1 %

Mechanical life: 5 x 10 cycles

For maximum relay life with inductive loads, external

protection is recommended.

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: Approx. 0.5 sec. (0 – 100 % at 90 %

setpoint)

Alarm Trip Operation Terminal No. in parentheses

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output to power)

•Output Code : 1, 2

(3–8)ON

Output

(5–8)ON

Input

(%)

1500 V AC @ 1 minute (input or output or power to ground)

▲

100

Setpoint

•Output Code : 3, 4

(3–8)ON

Output 1

(5–8)ON

(6–8)ON

Output 2

(7–8)ON

Input

(%)

▲

Setpoint 2

Setpoint 1

•Output Code : 5, 7

(3–8)ON

Hi Output

(5–8)ON

(7–8)ON

Lo Output

(6–8)ON

Input

(%)

▲

Lo Setpoint

Hi Setpoint

•Output Code : 8

(3–8)ON

Hi Output

(5–8)ON

(7–8)ON

Lo Output

(6–8)ON

Input

(%)

▲

Lo Setpoint

Hi Setpoint

Trip Operation in Power Failure

•Output code 1: Terminals 3 – 8 turn ON

•Output code 2: Terminals 5 – 8 turn ON

•Output code 3

•Output code 4

•Output code 5, 8

•Output code 7

http://www.m-system.co.jp/

10AS SPECIFICATIONS

ES-0881 Rev.13 Page 2/4

MODEL: 10AS

EXTERNAL VIEW

Single or Dual Output 1

or High Alarm LED

Single or Dual Output 1

or High Setpoint Adj.

Dual Output 2

or Low Setpoint Adj.

Dual Output 2

or Low Alarm LED

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7–M3.5 SCREW

8 (.31)

2–4.3 (.17) dia.

MTG HOLE

TERMINAL COVER

3 (.12)

25 (.98)

51 (2.01)

130 (5.12)

http://www.m-system.co.jp/

10AS SPECIFICATIONS

ES-0881 Rev.13 Page 3/4

MODEL: 10AS

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

■ SINGLE ALARM

■ Relay Protection

•AC Powered

Inductive

Load (Coil)

SETPOINT ADJ.

Comparator

Varistor or Spark

Quenching Circuit

LOAD

Low Drift

Amplifier

–

OUTPUT

INPUT

•DC Powered

Inductive

Load (Coil)

COM

Diode, Varistor or

CR Circuit

LOAD

POWER

■ DUAL ALARM

Hi ADJ. Lo ADJ.

Comparator

HI OUTPUT

Low Drift

Amplifier

–

INPUT

LO OUTPUT

COM

POWER

Relay actions are determined by output codes.

* Input shunt resistor incorporated for current input.

**With code 3, 4 (dual alarm), Output 1 is assigned to Hi,

while Output 2 is assigned to Lo terminals.

The diagram illustrates relay actions for the output code 5 or 8.

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10AS SPECIFICATIONS

ES-0881 Rev.13 Page 4/4

相关型号：