EM800SOAB22P [MRV]

LambdaDriverÂ® - Optical Amplifi er Module;


型号：	EM800SOAB22P
厂家：	MRV COMMUNICATIONS, INC.
描述：	LambdaDriverÂ® - Optical Amplifi er Module
文件：	总4页 (文件大小：1403K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

WDM & Optical Transport

Datasheet

LambdaDriver® - Optical Ampliﬁer Module (EM800-OAx/EM1600-OAx)

Features

Booster, In line and Pre-Ampliﬁer

Up to 22dBm maximum output power

Protocol and bandwidth transparent

Gain ﬂatness (with GFF) less than 1.0 dB

Low Noise ﬁgure

Optical power monitoring

Front panel status LEDs

Fast transient suppression time

Automatic Laser Shutdown (ALS)

Mid-stage connection

Applications

DWDM networks

Single-channel ampliﬁcation

Distance extention

Optical Ampliﬁer modules

LambdaDriver

^®Optical Ampliﬁer modules

are

Using MRV’s MegaVision Web^®NMS provides remote

family of low-noise Erbium-Doped Fiber Ampliﬁers control reducing the costly need for many inﬁeld service

(EDFA) ideal for Metro and Long-Haul Dense Wavelength

calls.

Division Multiplexing (DWDM) as well as Single

Wavelength applications. The optical design, coupled The modules allow monitoring of input and output

with sophisticated control circuitry, allows these power levels (real dBm values), temperature and signal

Optical Ampliﬁers to provide constant gain even with gain.

wavelengths being added or dropped in the network. The modules can be operated in two modes: automatic

Any ﬂuctuations caused by wavelengths addition/ gain control or automatic power control.These operating

removal can be handled by its ultra-fast transient modes and their respective parameter settings are

suppression.

factory pre-conﬁgured but can be changed by MRV

authorized personnel.

When paired with the

LambdaDriver

^®

Element

Management Module ,full monitoring and conﬁguration In AGC mode, the module maintains constant gain for

capabilities are supported with a local RS-232 interface each channel according to the Gain parameter setting,

and Ethernet/Fast Ethernet interfaces for remote

as long as the total output power does not exceed the

network monitoring using Telnet and SNMP.

maximum rated value (+22 dBm). This mode is factory

pre-conﬁgured.

ꢌ�ꢡꢜꢜ

ꢌ�ꢞꢜꢜ

ꢟꢏꢐꢋꢠꢎꢑꢋ�ꢍꢏ

ꢙꢞꢛꢄꢗ

�ꢀ�ꢁ

ꢁꢂꢃ

ꢎꢏꢍ

ꢐꢁꢎ

�ꢀ�ꢁ

ꢁꢂꢃ

ꢟꢏꢐꢋꢠꢎꢑꢋ�ꢍꢏ

ꢄꢅꢅꢆꢇꢈꢉ

ꢊꢋ ꢌꢊꢋꢍ

ꢙꢚꢛꢄꢗ

ꢚꢜ ꢝꢗ

ꢡꢜ ꢝꢗ

ꢑꢒꢇꢓꢔꢕꢖ

ꢐꢗꢒꢖꢓꢘꢓꢈ

ꢉ

ꢑꢒꢇꢓꢔꢕꢖ

ꢐꢗꢒꢖꢓꢘꢓꢈ

ꢉ

Long Haul Application

ꢑꢒꢇꢓꢔꢕ

ꢖ ꢐꢗꢒꢖ

ꢓꢘꢓꢈꢉ

Not sure what solution best ﬁts your needs? Visit www.mrv.com or e-mail us at sales@mrv.com

WDM & Optical Transport

In APC mode, the module maintains the output total Optical Ampliﬁer modules provide Automatic Power

power constant at the pre-deﬁned Output Power Shutdown, when input is below auto-shutdown

settings.

threshold. Power Shutdown can be also forced through

Additionaly each OA module with “M” in part number the management.

includes a special“Mid-stage”port for Optical Dispersion

Compensator.

The compact, 1-slot LambdaDriver Optical Ampliﬁer

modules install into any of the LambdaDriver^®

chassis.

There are 3 types of OAs: Booster, In-Line and Pre-

Most of the standard EDFA units have maximum

Ampliﬁer. The main difference between these modules +18dBm total output power. Special“High Power”EDFA

is the Input power level that dictates the application of modules have maximum +22dBm total output power

the speciﬁc module and the Gain values. For example, that mainly serve high wavelength count (more than

Booster is usually used at the beginning of the line and 32 waves) DWDM or ultra long single span applications.

therefore Input levels above 0 dBm and Gain of 9 to15 These high power units are double slot size.

dB should be expected. On the other hand, Pre-Ampliﬁer Each module provides visual indications of the front

Input level is very weak (down to –32 dBm/channel) panel and can be operated without management as

because it is positioned at the end of the line.

plug and play EDFA.

Multi-channel (DWDM) ampliﬁers are equipped with Besides DWDM networks application, LambdaDriver^®

Gain Flattening Filters (GFF) and provide ﬂat gain EDFAs can be used in any Single channel application

response across entire C-band and input power range.

For single channel applications GFF cost is saved.

thus providing ﬂexible means of extending an optical

link by compensating for optical budget loss.

Environment Speciﬁcations

Operating Temperature

Storage Temperature

Relative Humidity

-5

C - 45

^oC (23 ^o

F to 113

^oF)

-10

C - 70

^oC (50 ^o

F to 158

^oF)

85% maximum, non-condensing

Dimensions (W x H x D)

EM800 + 18dBm type

EM1600 + 18dBm type

EM800 High Power

EM1600 High Power

EM800 + 18dBm type

EM1600 + 18dBm type

EM800 High Power

26.93 mm (1.06 in) x 130.7 mm (5.145 in) x 227 mm (8.956 in) (1 slot wide)

26.93 mm (1.06 in) x 263.4 mm (10.37 in) x 227 mm (8.956 in) (1 slot wide)

54.18 mm (2.13 in) x 130.7 mm (5.14 in) x 227 mm (8.956 in) (2 slot wide)

54.18 mm (2.13 in) x 263.4 mm (10.37 in) x 227 mm (8.956 in) (2 slot wide)

0.586 Kg (1.28Lb)

Weight:

0.865 Kg (2.11Lb)

1.016 Kg (2.24Lb)

EM1600 High Power

1.305 Kg (2.47Lb)

Connectors

- All

E2000APC

- High Power Ouput

WDM & Optical Transport

Technical Speciﬁcations

Parameter

Value

Typical

Units

Minimum

Maximum

Wavelength Range

Output power

1528

1563

Booster &

In-Line

With Mid-Stage

+18

+17

+13

+22

+21

SOAB13, SOAI & Pre-Ampliﬁer

dBm

High Power Booster

High Power In-line

Input power

Booster

-15

-25

-30

-11

-22

-27

-3

-8

-7

In-Line

25db gain In-Line

Pre-Ampliﬁer

High Power Booster

High Power In-line

25db gain High Power In-Line

dBm

-2

Signal Gain *

Booster

In-line

Pre-amp

9 or 15

20 or 25

10 or 20

Noise Figure at rated Gain

Booster

7,5

Booster with mid-tage

In-Line

In-Line with mid-tage

Pre-Ampliﬁer

5.5

High Power Booster

High Power Booster with mid-tage

11.5

High Power In-line

High Power In-line with mid-tage

Input Dynamic Range

Input/Output Isolation (Min)

Gain Flatness at Speciﬁed Gain with GFF

Optical Return Loss (at Input and Output ports)

Polarization Mode Dispersion

µs

+/-0.5

+/-1.0

0.3

+/-0.2

0.5

+/-0.5

1.0

Polariziation Dependent Gain

Transient Overshoot (10 dB Drop)

Transient Suppression Time (10 dB Drop)

Management

< 32

WDM transmission laser status,Temperature status,

Port reception status, Port transmission status

LEDs

Monitoring

Alarm

Input power, Output power, Gain,Temperature

Input power, Output power,Temperature

Power Consumption:

18dBm type

High Power

3.3 W

15 W

Model dependent - see ordering information section

WDM & Optical Transport

EM800-OAIM

Optical In Line Ampliﬁer with Mid-stage +17dbm output and 20db gain

EM800-OAIM25

EM800-OAI

Optical In Line Ampliﬁer with Mid stage +17dbm output and 25db gain

Optical In Line Ampliﬁer + 18dbm output and 20db gain

EM800-OAP

Optical Pre-Ampliﬁer + 13dbm output and 20db gain

EM800-OAP10

EM800-OAB

Optical Pre-Ampliﬁer +13 dbm output and 10db gain

Optical Booster Ampliﬁer + 18dbm output and 9db gain

EM800-OABM

EM800-SOAIM

EM800-SOAI

EM800-SOAI25

EM800-OAI25

Optical Booster Ampliﬁer with Mid-stage +17dbm output and 9db gain

Single channel Optical in line Ampliﬁer with Mid-stage +13dbm output and 20db gain

Single channel Optical in line Ampliﬁer output +13dbm output and 20db gain

Single channel Optical in line Ampliﬁer output +17dbm output and 25db gain

Optical In Line Ampliﬁer +18dbm output and 25db gain

EM800-SOAP

EM800-SOAB

EM800-SOAB13

EM1600-OABM

EM1600-OAIM

EM1600-OAI

Single channel Optical Pre - Ampliﬁer +13dbm output and 20db gain

Single channel Optical Booster Ampliﬁer +18dbm output and 15db gain

Single channel Optical Booster Ampliﬁer +13dbm output and 15db gain

Optical Booster Ampliﬁer with Mid-stage +17dbm output and 9db gain

Optical In Line Ampliﬁer with Mid-stage +17dbm output and 20db gain

Optical In Line Ampliﬁer +18 dbm output and 20db gain

EM1600-OAP

Optical Pre-Ampliﬁer +13 dbm output and 20db gain

EM1600-OAP10

EM1600-OAB

Optical Pre-Ampliﬁer +13 dbm output and 10db gain

Optical Booster Ampliﬁer +18 dbm output and 9db gain

EM1600-SOAIM

EM1600-SOAI

Single channel Optical in line Ampliﬁer with Mid-stage + 13dbm output and 20db gain

Single channel Optical in line Ampliﬁer + 13dbm output and 20db gain

Single channel Optical Pre-Ampliﬁer + 13dbm output and 20db gain

Single channel Optical Booster Ampliﬁer + 18dbm output and 15db gain

Single channel Optical Booster Ampliﬁer + 13dbm output and 15db gain

EM1600-SOAP

EM1600-SOAB

EM1600-SOAB13

High Power EDFAs

EM800-OAI21P

EM800-OAI21PM

EM800-OAI21PM25

EM800-OAB22P

EM800-OAB22PM

EM800-SOAB22P

EM1600-OAB22P

EM1600-OAB22PM

EM1600-OAI21P

EM1600-OAI21PM

EM1600-SOAB22P

Optical In Line Ampliﬁer with +21dbm output and 20db gain

Optical In Line Ampliﬁer with Mid-stage +21dbm output and 20db gain

Optical In Line Ampliﬁer with Mid-stage +21dbm output and 25db gain

Optical Booster Ampliﬁer with +22dbm output and 9db gain

Optical Booster with Mid-stage+22dbm output and 9db gain

Single channel Optical Booster Ampliﬁer +22dbm output and 20db gain

Optical Booster Ampliﬁer with +22dbm output and 9db gain

Optical Booster Ampliﬁer with Mid-stage +22dbm output and 9db gain

Optical In Line Ampliﬁer with +21dbm output and 20db gain

Optical In Line Ampliﬁer with Mid-stage +21dbm output and 20db gain

Single channel Optical Booster Ampliﬁer + 22dbm output and 20dB gain

MRV-LD-OA

Rev.5 11-09

EM800SOAB22P [MRV]

相关型号：

EM800SOAI

EM800SOAI25

EM800SOAIM

EM800SOAP

EM8050U

EM81

EM828164PA

EM828164PA-60

EM828164PA-75

EM828164PA-90

EM83010

EM83040