EM800-OAIM25 [MRV]
LambdaDriver Optical Amplifi er Module (EM800-OAx/EM1600-OAx); LambdaDriver光功率放大器ER模块（ EM800 - OAX / EM1600 - OAX ）
| 型号： | EM800-OAIM25 |
| 厂家： | 
MRV COMMUNICATIONS, INC. |
| 描述： | LambdaDriver Optical Amplifi er Module (EM800-OAx/EM1600-OAx) |
| 文件： | 总4页 (文件大小：1394K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
WDM & Optical Transport
Datasheet
LambdaDriver® - Optical Amplifier Module (EM800-OAx/EM1600-OAx)
Features
Booster, In line and Pre-Amplifier
Up to 22dBm maximum output power
Protocol and bandwidth transparent
Gain flatness (with GFF) less than 1.0 dB
Low Noise figure
Optical power monitoring
Front panel status LEDs
Fast transient suppression time
Automatic Laser Shutdown (ALS)
Applications
DWDM networks
Single-channel amplification
Distance extention
Optical Amplifier modules
LambdaDriverOptical Amplifier modules are a family Using MRV’s MegaVision WebNMS provides remote
of low-noise Erbium-Doped Fiber Amplifiers (EDFA) ideal control reducing the costly need for many infield service
for Metro and Long-Haul Dense Wavelength Division
Multiplexing (DWDM) as well as Single Wavelength
applications.The optical design,coupled with sophisticated The modules allow monitoring of input and output power
control circuitry, allows these Optical Amplifiers to provide levels (real dBm values), temperature and signal gain.
constant gain even with wavelengths being added or The modules can be operated in two modes: automatic
dropped in the network. Any fluctuations caused by gain control or automatic power control. These operating
wavelengths addition/removal can be handled by its ultra- modes and their respective parameter settings are factory
fast transient suppression.
pre-configured but can be changed by MRV authorized
personnel.
When paired with the
Management Module , full monitoring and configuration In AGC mode, the module maintains constant gain for
capabilities are supported with a local RS-232 interface each channel according to the Gain parameter setting,
as long as the total output power does not exceed the
monitoring using Telnet and SNMP.
maximum rated value (+22 dBm).This mode is factory pre-
configured.
ꢕ�ꢡꢜꢜ
ꢕ�ꢡꢜꢜ
ꢕ�ꢞꢜꢜ
ꢟꢘꢋꢔꢠꢗꢄꢔ�ꢖꢘ
ꢟꢘꢋꢔꢠꢗꢄꢔ�ꢖꢘ
ꢟꢘꢋꢔꢠꢗꢄꢔ�ꢖꢘ
ꢟꢘꢋꢔꢠꢗꢄꢔ�ꢖꢘ
ꢙꢞꢛꢐꢌ
�ꢀ�ꢁ
ꢁꢂꢃ
ꢗꢘꢖ
ꢋꢁꢗ
�ꢀ�ꢁ
ꢁꢂꢃ
ꢟꢘꢋꢔꢠꢗꢄꢔ�ꢖꢘ
ꢐꢑꢑꢒꢆꢎꢏ
ꢓꢔ ꢕꢓꢔꢖ
ꢙꢚꢛꢐꢌ
ꢚꢜ ꢝꢌ
ꢡꢜ ꢝꢌ
ꢟꢘꢋꢔꢠꢗꢄꢔ�ꢖꢘ
ꢄꢅꢆꢇꢈꢉꢊ
ꢋꢌꢅꢊꢇꢍꢇꢎ
ꢏ
ꢄꢅꢆꢇꢈꢉꢊ
ꢋꢌꢅꢊꢇꢍꢇꢎ
ꢏ
Long Haul Application
ꢄꢅꢆꢇꢈ
ꢉꢊ ꢋꢌ
ꢅꢊꢇꢍꢇꢎ
ꢏ
Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at sales@mrv.com
WDM & Optical Transport
In APC mode, the module maintains the output total Optical Amplifier modules provide Automatic Power
power constant at the pre-defined Output Power Shutdown, when input is below auto-shutdown
settings.
threshold. Power Shutdown can be also forced through
Additionaly a special OA module, EM800-OAPD, includes the management.
an integrated Tunable Optical Dispersion Compensator
(TODC). Tuning of dispersion is done via the system The compact, 1-slot LambdaDriver Optical Amplifier
management module.
modules install into any of the LambdaDriver
+18dBm total output power. Special“High Power”EDFA
There are 3 types of OAs: Booster, In-Line and Pre- modules have maximum +22dBm total output power
Amplifier. The main difference between these modules that mainly serve high wavelength count (more than
is the Input power level that dictates the application of 32 waves) DWDM or ultra long single span applications.
the specific module and the Gain values. For example, These high power units are double slot size.
Booster is usually used at the beginning of the line and
therefore Input levels above 0 dBm and Gain of 9 to15 Each module provides visual indications of the front
dB should be expected. On the other hand, Pre-Amplifier panel and can be operated without management as
Input level is very weak (down to –32 dBm/channel) plug and play EDFA.
because it is positioned at the end of the line.
Besides DWDM networks application, LambdaDriver
Multi-channel (DWDM) amplifiers are equipped with EDFAs can be used in any Single channel application
Gain Flattening Filters (GFF) and provide flat gain thus providing flexible means of extending an optical
response across entire C-band and input power range.
For single channel applications GFF cost is saved.
link by compensating for optical budget loss.
WDM & Optical Transport
Environment Specifications
Operating Temperature
Storage Temperature
Relative Humidity
oo
oo
85% maximum, non-condensing
Dimensions (W x H x D)
EM800 + 18dBm type
26.93 mm (1.06 in) x 130.7 mm (5.145 in) x 227 mm (8.956 in) (1 slot wide)
26.93 mm (1.06 in) x 263.4 mm (10.37 in) x 227 mm (8.956 in) (1 slot wide)
54.18 mm (2.13 in) x 130.7 mm (5.14 in) x 227 mm (8.956 in) (2 slot wide)
54.18 mm (1.06 in) x 263.4 mm (10.37 in) x 227 mm (8.956 in) (2 slot wide)
0.586 Kg (1.28Lb)
EM1600 + 18dBm type
EM800 High Power
EM1600 High Power
EM800 + 18dBm type
EM1600 + 18dBm type
EM800 High Power
Weight:
0.865 Kg (2.11Lb)
1.016 Kg (2.24Lb)
EM1600 High Power
1.305 Kg (2.47Lb)
Connectors
- High Power Ouput
Technical Specifications
Parameter
Value
Units
Typical
Wavelength Range
Maximum Output power
Booster & In-Line
+18
+13
With Mid-Stage
SOAB13, SOAI & Pre-Amplifier
High Power Booster
High Power In-line
Minimum Input power
In-Line
Pre-Amplifier
-25
Input Dynamic Range
Input/Output Isolation (Min)
Signal Gain *
Booster
Pre-amp
9 or 15
10 or 20
+/-0.5
Gain Flatness at Specified Gain with GFF
Signal- Noise Figure for Gain > 20 dB
Optical Return Loss (at Input and Output ports)
Polarization Mode Dispersion
Polariziation Dependent Gain
Transient Overshoot (10 dB Drop)
Transient Suppression Time (10 dB Drop)
+/-1.0
dB
dB
µs
+/-0.2
0.5
+/-0.5
1.0
Management
Tunable dispersion range (EM800/EM1600 - OAPD
EM800/EM1600 - OABD, EM800/EM1600 - OAID)
-1700ps/nm to +1700ps/nm
WDM transmission laser status,Temperature status, Port
reception status, Port transmission status
LEDs
Monitoring
Alarm
Input power, Output power, Gain,Temperature
Input power, Output power,Temperature
Power Consumption:
18dBm type
High Power
15 W
Model dependent - see ordering information section
WDM & Optical Transport
Optical In Line Amplifier with Mid-stage +17dbm output and 20db gain
EM800-OAIM25
EM800-OAI
Optical In Line Amplifier with Mid stage +17dbm output and 25db gain
Optical In Line Amplifier + 18dbm output and 20db gain
EM800-OAP
Optical Pre-Amplifier + 13dbm output and 20db gain
EM800-OAP10
EM800-OAB
Optical Pre-Amplifier +13 dbm output and 10db gain
Optical Booster Amplifier + 18dbm output and 9db gain
EM800-OABM
EM800-SOAIM
EM800-SOAI
EM800-SOAI25
EM800-OAI25
Optical Booster Amplifier with Mid-stage +17dbm output and 9db gain
Single channel Optical in line Amplifier with Mid-stage +13dbm output and 20db gain
Single channel Optical in line Amplifier output +13dbm output and 20db gain
Single channel Optical in line Amplifier output +17dbm output and 25db gain
Optical In Line Amplifier +18dbm output and 25db gain
EM800-SOAP
EM800-SOAB
EM1600-OAIM
EM1600-OAI
Single channel Optical Pre - Amplifier +13dbm output and 20db gain
Single channel Optical Booster Amplifier +18dbm output and 15db gain
Single channel Optical Booster Amplifier +13dbm output and 15db gain
Optical Booster Amplifier with Mid-stage +17dbm output and 9db gain
Optical In Line Amplifier with Mid-stage +17dbm output and 20db gain
Optical In Line Amplifier +18 dbm output and 20db gain
EM1600-OAP
Optical Pre-Amplifier +13 dbm output and 20db gain
EM1600-OAP10
EM1600-OAB
Optical Pre-Amplifier +13 dbm output and 10db gain
Optical Booster Amplifier +18 dbm output and 9db gain
EM1600-SOAIM
EM1600-SOAI
Single channel Optical in line Amplifier with Mid-stage + 13dbm output and 20db gain
Single channel Optical in line Amplifier + 13dbm output and 20db gain
Single channel Optical Pre-Amplifier + 13dbm output and 20db gain
Single channel Optical Booster Amplifier + 18dbm output and 15db gain
Single channel Optical Booster Amplifier + 13dbm output and 15db gain
EM1600-SOAP
EM1600-SOAB
EM1600-SOAB13
High Power EDFAs
EM800-OAI21P
EM800-OAI21PM
EM800-OAB22PM
EM800-SOAB22P
EM1600-OAB22P
EM1600-OAB22PM
EM1600-OAI21P
EM1600-OAI21PM
EM1600-SOAB22P
Optical In Line Amplifier with +21dbm output and 20db gain
Optical In Line Amplifier with Mid-stage +21dbm output and 20db gain
Optical In Line Amplifier with Mid-stage +21dbm output and 25db gain
Optical Booster Amplifier with +22dbm output and 9db gain
Optical Booster with Mid-stage+22dbm output and 9db gain
Single channel Optical Booster Amplifier +22dbm output and 20db gain
Optical Booster Amplifier with +22dbm output and 9db gain
Optical Booster Amplifier with Mid-stage +22dbm output and 9db gain
Optical In Line Amplifier with +21dbm output and 20db gain
Optical In Line Amplifier with Mid-stage +21dbm output and 20db gain
Single channel Optical Booster Amplifier + 22dbm output and 20dB gain
EDFAs with Integrated TDC
EM800-OAPD
EM800-OABD
EM800-OAID
EM800-OAI25D
EM1600-OAID
EM1600-OAP10D
Optical Pre-Amplifier with integrated DC +13dbm output and 20db gain
Optical Booster Amplifier with integrated DC +18dbm output and 9db gain
Optical In Line Amplifier with integrated DC +18dbm output and 20db gain
Optical In Line Amplifier with integrated DC +17dbm output and 25db gain
Optical Pre-Amplifier with integrated DC +13dbm output and 20db gain
Optical Booster Amplifier with integrated DC +18 dbm output and 9db gain
Optical In Line Amplifier with integrated DC +18 dbm output and 20db gain
Optical Pre-Amplifier with integrated DC +13dbm output and 10db gain
MRV-LD-OA
Rev.4 11-08
Copyright ©2008 MRV Communications, Inc. All Rights Reserved.
相关型号：
©2020 ICPDF网 联系我们和版权申明