MP2009EE-2.5-Z [MPS]
Fixed Positive LDO Regulator,;型号: | MP2009EE-2.5-Z |
厂家: | MONOLITHIC POWER SYSTEMS |
描述: | Fixed Positive LDO Regulator, 输出元件 调节器 |
文件: | 总14页 (文件大小:788K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MP2009
Ultra-Low-Noise
Low-Dropout, 120mA Linear Regulator
DESCRIPTION
FEATURES
The MP2009 is an ultra low noise, low dropout
linear regulator. The output voltage of MP2009
ranges from 1.5V to 4.5V in 100mV increments
and 1% accuracy by operating from a +2.0V to
+6.0V input. It is designed to deliver up to
120mA continuous output current. It achieves a
low 120mV dropout for full load current.
Space-Saving SC70 Package
16µV RMS Output Noise (100Hz to 30kHz) No
Bypass Capacitor Required
78dB PSRR at 1kHz
120mV Dropout at 120mA Load
Stable with 1µF Ceramic Capacitor for Any
Load
Low 50µA Ground Current
The MP2009 uses an internal PMOS as the
pass element, which consumes 50µA supply
current at no load condition. New innovative
design techniques make MP2009 achieve ultra-
low output voltage noise of 16µV RMS without a
noise bypass capacitor.
Very Fast Line and Load Transient
Response with Small Input and Output
Capacitor
Current Limit and Thermal Protection
APPLICATIONS
The MP2009 are designed and optimized to
work with low value, low cost ceramic
capacitors in space-limiting and performance
consideration. It requires only 1µF (typ) of
output capacitance for stability with any load.
It is available in a 5-pin SC70 package.
Cellular and Cordless Phones
VCOs
PDA and Palmtop Computers
Digital Cameras
Base Stations
Wireless LANs
Bluetooth Portable Radios and Accessories
Portable and Battery-Powered Equipment
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
1
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
ORDERING INFORMATION
Free Air Temperature
Part Number**
Package
VOUT(V)
Top Marking
Range (TA)
MP2009EE-1.5*
MP2009EE-1.8
MP2009EE-2.5
MP2009EE-2.6
MP2009EE-2.7
MP2009EE-2.8
MP2009EE-2.85
MP2009EE-3
1.5
1.8
2.5
2.6
2.7
2.8
2.85
3
8B
AQ
5-SC70
-20C to +85C
MP2009EE-3.3
MP2009EE-4.0
MP2009EE-4.5
3.3
4.0
4.5
9U
CG
* For Tape & Reel, add suffix –Z (eg. MP2009EE-1.5–Z).
For Lead Free, add suffix –LF (eg. MP2009EE-1.5–LF–Z)
** Available options are identified by those with top marking. For other options, please contact factory to check
availability.
PACKAGE REFERENCE
Thermal Resistance (4)
5-SC70...................................260.....130 C/W
θJA θJC
ABSOLUTE MAXIMUM RATINGS (1)
Supply Input Voltage .................................6.5V
(2)
Power Dissipation, PD @ TA =25°C
Notes:
1) Exceeding these ratings may cause permanent damage to
the device.
2) The maximum allowable power dissipation is a function of the
5-SC70 .................................................0.385W
Operation Temperature Range ...-20°C to 85°C
Storage Temperature Range .....-65°C to 150°C
Lead Temperature (Soldering, 10sec) .....300°C
maximum junction temperature, TJ(MAX)
ambient thermal resistance, θJA, and the ambient
temperature, TA. The maximum allowable power dissipation at
, the junction-to-
any ambient temperature is calculated using: PD(MAX)=(TJ(MAX)
-
Recommended Operating Conditions (3)
Supply Input Voltage...................... 2.0V to 6.0V
Enable Input Voltage ........................ 0V to 6.0V
Operating Junction Temp (TJ).- 40°C to +125°C
TA)/θJA. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage. Thermal
shutdown engages at TJ=150C(typ) and disengages at
TJ=130C (typ).
3) The device is not guaranteed to function outside its operating
conditions.
4) Measured on JESD51-7 4-layer board.
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
2
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
ELECTRICAL CHARACTERISTICS
VIN = VOUT+0.5V, VEN= VIN, and CIN=1µF, COUT=1μF, Typical values are at TA=25C, unless
otherwise noted.
Parameter
Symbol Conditions
Min
Typ
Max
Units
Input Voltage Range
VIN
2
6
1
2
V
IOUT =1mA,TA=25°C
IOUT =100µA to 80mA,TA=25°C
IOUT =100µA to 80mA,
TA=-20°C ~85°C
-1
-2
Output Voltage Accuracy
Maximum Output Current
%
±3
IOUT
120
130
mA
mA
VOUT =1.8V
OUT=90% of nominal value
VOUT =2.5V
OUT=90% of nominal value
VOUT =3.3V
OUT=90% of nominal value
VOUT =4.0V
OUT=90% of nominal value
VOUT =1.8V, IOUT =80mA
VOUT =1.8V, IOUT =120mA
VOUT =2.5V, IOUT =80mA
200
230
250
270
300
330
350
160
180
200
mA
mA
mA
Current Limit
ILIM
370
240
115
172
100
140
80
120
70
110
50
mV
mV
mV
mV
mV
mV
mV
mV
220
VOUT =2.5V, IOUT =120mA
Dropout Voltage (5)
Ground Current
VOUT =3.3V, IOUT =80mA
VOUT =3.3V, IOUT =120mA
VOUT =4.0V, IOUT =80mA
VOUT =4.0V, IOUT =120mA
IOUT =0.05mA
VIN=Vout-0.1V, IOUT =0mA
VIN=Vout+0.5V to 6V
IOUT =0.1mA
200
180
90
90
IQ
µA
50
Line Regulation(6)
Load Regulation(7)
VLNR
VLDR
0.03
%/V
IOUT =1mA to 120mA
TA=25°C
0.002
0.01
0.2
%/mA
1
Shutdown Supply Current
Ripple Rejection
ISHDN
VEN=0
µA
dB
TA=85°C
F=1kHz, IOUT =10mA
F=10kHz, IOUT =10mA
F=100kHz, IOUT =10mA
F=100Hz to 30kHz
ILOAD=10mA
78
75
55
PSRR
16
17
Output Noise Voltage
µVRMS
F=100Hz to 30kHz
ILOAD=80mA
EN Startup delay(8)
VEN Logic Low Level
VEN Logic High Level
RLOAD=50Ω
150
0.4
0.3
µs
V
TA=25°C
TA=85°C
VIN=2V to 6V
VIN=2V to 6V
1.5
V
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
3
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
ELECTRICAL CHARACTERISTICS (continued)
VIN = VOUT+0.5V, VEN= VIN, and CIN=1µF, COUT=1μF, Typical values are at TA=25C, unless
otherwise noted.
Parameter
Symbol Conditions
Min
Typ
Max
1
Units
µA
TA=25°C
TA=85°C
VIN=6V,
VEN=6V
VEN Input Bias Current
Thermal Shutdown(9)
0.01
150
°C
Thermal
Hysteresis
Notes:
Shutdown
20
°C
5) Dropout is defined as VIN-VOUT when VOUT is 100mV below the value of VOUT for VIN= VOUT +0.5V.
VOUT[V
] VOUT[V
IN(MIN)
]
6)
7)
IN(MAX)
Line Regulation
100(%/V)
(VIN(MAX) VIN(MIN) ) VOUT(NOM)
V
] V
OUT[IOUT(MIN)
OUT[IOUT(MAX)
]
Load Regulation
100(%/mA)
(IOUT(MAX) IOUT(MIN) ) VOUT(NOM)
8) Time needed for VOUT to reach 90%of final value.
9) Guaranteed by design, not tested.
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
4
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
PIN FUNCTIONS
Pin #
Name
Description
1
2
IN
Input supply
GND
EN
Common Ground
When enable pin (EN) is high, the regulator turns on; when enable pin (EN) is
low, the regulator shutdown.
3
4
5
NC
No Connection
OUT
Output of the regulator
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
5
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS
VIN=2.3V, VOUT=1.8V, CIN=1µF, COUT=1µF, EN=2.3V, Typical Value at TA = 25C unless otherwise
specified.
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
6
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
VIN=2.3V, VOUT=1.8V, CIN=1µF, COUT=1µF, EN=2.3V, Typical Value at TA = 25C unless otherwise
specified.
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
7
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
VIN=3.8V, VOUT=3.3V, CIN=1µF, COUT=1µF, EN=3.8V, Typical Value at TA = 25C unless otherwise
specified.
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
8
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
VIN=3.8V, VOUT=3.3V, CIN=1µF, COUT=1µF, EN=3.8V, Typical Value at TA = 25C unless otherwise
specified.
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
9
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
FUNCTION BLOCK DIAGRAM
Figure1—Functional Block Diagram
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
10
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
OPERATION
The MP2009 is an ultra low noise, low dropout,
low-quiescent current linear regulator designed
for space-restricted applications. It is intended for
use in devices that requires very low voltage, low
quiescent current such as wireless LAN, battery-
powered equipment and hand-held equipment.
Shutdown
The MP2009 can be switched ON or OFF by a
logic input at the EN pin. A high voltage at this
pin will turn the device on. When the EN pin is
low, the regulator output is off. The EN pin should
be tied to VIN to keep the regulator output always
on if the application does not require the
shutdown feature. Do not float the EN pin.
Internal P-Channel Pass Transistor
The MP2009 features
a
1.4Ω P-channel
MOSFET as the pass transistor. It provides
several advantages over similar designs using
PNP pass transistor. The P-channel MOSFET
requires no base drive, which reduces quiescent
current considerably and increase the battery life.
PNP-based regulators waste considerable
current in dropout when the pass transistor
saturates. They also use high base-drive current
under the large load condition. The MP2009 does
not suffer from these problems and consume
only 50µA of quiescent current in light load and
dropout mode.
Current Limit and Thermal Protection
The MP2009 includes an independent current
limit structure which monitors and controls the P-
channel MOSFET’s gate voltage to limit the
guaranteed maximum output current to 120mA.
Thermal protection turns off the P-channel
MOSFET when the junction temperature exceeds
+150ºC, allowing the IC to cool. When the IC’s
junction temperature drops by 20ºC, the PMOS
will be turned on again. Thermal protection limits
total power dissipation in the MP2009. For
reliable operation, junction temperature should
be limited to 125 ºC maximum.
Dropout Voltage
Dropout voltage is the minimum input to output
differential voltage required for the regulator to
maintain an output voltage within 100mV of its
nominal value. It determines the available end-of-
life battery voltage in battery-powered systems.
For the P-channel MOSFET pass element, the
dropout voltage is a function of drain to source on
resistance. Because the P-channel MOSFET
pass element behaves as a low-value resistor,
the dropout voltage of MP2009 is very low.
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
11
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
APPLICATION INFORMATION
Power Dissipation
bypass capacitor for space-limiting applications.
The power supply rejection is 75dB at 10kHz and
55dB at 100kHz. (See the PSRR vs. Frequency
The power dissipation for any package depends
on the thermal resistance of the case and circuit
board, the temperature difference between the
junction and ambient air, and the rate of airflow.
The power dissipation across the device can be
represented by the equation:
graph
in
the
Typical
Performance
Characteristics).
Input Capacitor Selection
Use a 1µF capacitor on the input of the MP2009.
Larger values will help to improve line transient
response with the drawback of increased size.
Ceramic capacitors are preferred, but tantalum
capacitors may also suffice.
P = (VIN - VOUT) ×IOUT
The allowable power dissipation can be
calculated using the following equation:
P(MAX) = (TJunction - TAmbient) / θJA
Output Capacitor Selection
Where (TJunction - TAmbient) is the temperature
difference between the junction and the
surrounding environment, θJA is the thermal
resistance from the junction to the ambient
environment. Connecting the GND pin of
MP2009 to ground with a large ground plane will
help the channel heat away.
The MP2009 is designed specifically to work with
very low ESR ceramic output capacitor in space-
limiting and performance consideration. Output
capacitor of larger values will help to improve
load transient response and reduce noise with
the drawback of increased size. A 1µF ceramic
capacitor with ESR lower than 3Ω is sufficient for
the MP2009 application circuit. (See the Region
of Stable COUT ESR vs. Load Current graph in the
Typical Performance Characteristics)
Output Noise and PSRR
For the MP2009, an internal 50pF bypass
capacitor with new innovative structure reduces
output noises greatly. It does not need external
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
12
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
PCB LAYOUT GUIDE
PCB layout is very important to achieve good
regulation, ripple rejection, transient response
and thermal performance. It is highly
recommended to duplicate EVB layout for
optimum performance.
2) Ensure all feedback connections are short
and direct. Place the feedback resistors and
compensation components as close to the
chip as possible.
3) Connect IN, OUT and especially GND
respectively to a large copper area to cool
the chip to improve thermal performance and
long-term reliability.
If change is necessary, please follow these
guidelines and take figure 2 for reference.
1) Input and output bypass ceramic capacitors
are suggested to be put close to the IN Pin
and OUT Pin respectively.
Figure 2 —MP2009 Typical Application Circuit
VOUT
COUT
VIN
R1
1
VIN OUT
5
4
CIN
2
3
GND
EN
NC
GND
Figure 3—MP2009 Top Layer
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
13
MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
PACKAGE INFORMATION
5-SC70
NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third
party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not
assume any legal responsibility for any said applications.
MP2009 Rev. 1.22
11/21/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
14
相关型号:
©2020 ICPDF网 联系我们和版权申明