SRU7805W [MPD]

Ultra-Wide Input, 0.5A Non-isolated POL Switching Regulators; 超宽输入, 0.5A非隔离式POL开关稳压器
SRU7805W
型号: SRU7805W
厂家: MICROPOWER DIRECT, LLC    MICROPOWER DIRECT, LLC
描述:

Ultra-Wide Input, 0.5A Non-isolated POL Switching Regulators
超宽输入, 0.5A非隔离式POL开关稳压器

稳压器 开关
文件: 总2页 (文件大小:411K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Series  
SRU7805W  
Ultra-Wide Input, 0.5A  
Non-isolated POL  
Switching Regulators  
Electrical Specifications  
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.  
Output  
Parameter  
Output Voltage Accuracy  
Line Regulation  
Conditions  
VIN = Min to Max  
Min.  
Typ.  
±±.0  
±0.ꢁ  
±0.ꢀ  
±0  
Max.  
±ꢀ.0  
±ꢂ.0  
±0.ꢃ  
ꢃ0  
Units  
%
%
%
mV P - P  
°C  
mA  
%/°C  
µF  
mA  
W
Key Features:  
Efficiency to 95%  
Ultra-Wide Input Range  
0.5A Output Current  
Compact SIP Case  
LM78xx Replacement  
Short Circuit Protected  
Thermal Shutdown  
Low Noise  
Load Regulation  
Ripple & Noise (±0 MHz)  
Thermal Shutdown  
Quiescent Current  
Temperature Coefficient  
Maximum Capacitive Load  
Output Current Limit  
Short Circuit Input Power  
Output Short Circuit  
General  
IOUT = ꢂ0% to ꢂ00%  
See Note ꢀ  
See Note ꢁ  
ꢂꢃ0  
5
0.0ꢂ5  
ꢂ00  
ꢂ,±00  
ꢂ.±  
See Note 5  
700  
0.7±  
Continuous (Autorecovery)  
Low Low Cost  
Parameter  
Conditions  
Min.  
Not Isolated  
ꢂ±0  
Typ.  
Max.  
Units  
Isolation Voltage  
Switching Frequency  
Environmental  
Parameter  
Operating Temperature Range  
Operating Temperature Range  
Storage Temperature Range  
Lead Temperature  
Cooling  
800  
kHz  
Conditions  
Min.  
-ꢁ0  
Typ.  
+±5  
Max.  
+85  
+ꢂ00  
+ꢂ±5  
ꢀ00  
Units  
°C  
°C  
°C  
°C  
Ambient  
Case  
-55  
ꢂ.5 mm From Case For ꢂ0 Sec  
Free Air Convection  
RH, Non-condensing  
Humidity  
95  
%
Physical  
Case Size  
Case Material  
Weight  
0.ꢁ5 x 0.ꢀ5 x 0.ꢃ9 Inches (ꢂꢂ.5 x 9.0 x ꢂ7.50 mm)  
Non-Conductive Black Plastic (UL-9ꢁV0)  
0.ꢂꢀ Oz (ꢀ.7g)  
Reliability Specifications  
Parameter  
Conditions  
MIL HDBK ±ꢂ7F, ±5°C, Gnd Benign  
MIL HDBK ±ꢂ7F, 7ꢂ°C, Gnd Benign  
Min.  
ꢀ.5  
ꢂ.5  
Typ.  
Max.  
Units  
MTBF  
MHours  
Typical Application Circuit  
MicroPower Direct  
±9± Page Street  
Suite D  
Stoughton, MA 0±07±  
USA  
T: (78ꢂ) ꢀꢁꢁ-8±±ꢃ  
F: (78ꢂ) ꢀꢁꢁ-8ꢁ8ꢂ  
E: sales@micropowerdirect.com  
W: www.micropowerdirect.com  
Notes:  
1. The diode D1 is used to protect the module against a reverse connection.  
2. C1 is required if a high voltage input to the regulator is used. It will help prevent voltage spikes that could possibly damage  
the regulator. If used, the value should be 47 µF minimum  
2. This circuit example shows a simple connection utilizing a second regulator to provide a second regulated output. For  
information on other circuits (filtering, protection, etc.) please contact the factory.  
www.micropowerdirect.com  
Model Selection Guide  
www.micropowerdirect.com  
Output  
Input  
Voltage Range  
Derating Curve  
Efficiency (%, Typ)  
Min Vin Max Vin  
Model  
Voltage Current  
(VDC) (mA, Max)  
Number  
(VDC)  
SRU7805-0ꢀW(L)  
SRU7805-05W(L)  
SRU7805-0ꢃW(L)  
SRU7805-09W(L)  
SRU7805-ꢂ±W(L)  
SRU7805-ꢂ5W(L)  
SRU7805-±ꢁW(L)  
9.00 - 7±.0  
9.00 - 7±.0  
9.00 - 7±.0  
ꢂꢁ.0 - 7±.0  
ꢂ7.0 - 7±.0  
±0.0 - 7±.0  
ꢀꢃ.0 - 7±.0  
ꢀ.ꢀ  
5.0  
500.0  
500.0  
500.0  
500.0  
500.0  
500.0  
500.0  
8±  
87  
9ꢂ  
9±  
9ꢀ  
9ꢁ  
95  
75  
8ꢂ  
8ꢁ  
8ꢃ  
89  
90  
9ꢂ  
ꢃ.5  
9.0  
ꢂ±.0  
ꢂ5.0  
±ꢁ.0  
For right-angle pin option, add suffix “L” to model number (i.e. SRU7805-15WL)  
Notes:  
1. Load regulation is specified for an output load change of 10% to 100%.  
2. Operation under 10% load will not damage the unit. However, it may not meet all specifications.  
3. Measured at an internal IC junction.  
4. Quiescent current is specified at 0% load for VIN = nom.  
5. This regulator is not designed to be used in parallel with another unit to increase output power.  
6. The input should not exceed the range given in the model selection chart. Exceeding this limit could  
damage the unit.  
Characteristic Curves (Efficiency & Ripple)  
Pin Connection  
Pin  
1
2
3
Function +Vin Gnd +Vout  
Mechanical Dimensions  
Efficiency vs Load (Vin = Min)  
Efficiency vs Load (VIN = Nom)  
Efficiency vs Input Voltage (Full Load)  
Ripple vs Load (VIN = Max)  
Ripple vs Load (VIN = Nom)  
Notes:  
All dimensions are typical in inches (mm)  
Tolerance x.xx = 0.01 ( 0.25)  
Pin 1 is marked by a “dot” or indentation on the side of the unit  
MicroPower Direct  
Ripple vs Load (VIN = Min)  
We Power Your Success - For Less!  
±9± Page Street Ste D Stoughton, MA 0±07±  
TEL: (78ꢂ) ꢀꢁꢁ-8±±ꢃ  
FAX: (78ꢂ) ꢀꢁꢁ-8ꢁ8ꢂ  
E-Mail: sales@micropowerdirect.com  

相关型号:

SRU8028

Shielded SMD Power Inductors
BOURNS

SRU8028-100Y

Shielded SMD Power Inductors
BOURNS

SRU8028-101Y

Shielded SMD Power Inductors
BOURNS

SRU8028-120Y

Shielded SMD Power Inductors
BOURNS

SRU8028-150Y

Shielded SMD Power Inductors
BOURNS

SRU8028-1R0Y

General Purpose Inductor,
BOURNS

SRU8028-220Y

Shielded SMD Power Inductors
BOURNS

SRU8028-2R5Y

Shielded SMD Power Inductors
BOURNS

SRU8028-330Y

Shielded SMD Power Inductors
BOURNS

SRU8028-3R3Y

Shielded SMD Power Inductors
BOURNS

SRU8028-470Y

Shielded SMD Power Inductors
BOURNS

SRU8028-4R7Y

Shielded SMD Power Inductors
BOURNS