AD23602C [MPD]
Very Low Cost, 360W DIN Rail Mount Dual Output AC/DC Power Supplies; 非常低的成本， 360W DIN轨安装双路输出AC / DC电源
| 型号： | AD23602C |
| 厂家： | 
MICROPOWER DIRECT, LLC |
| 描述： | Very Low Cost, 360W DIN Rail Mount Dual Output AC/DC Power Supplies |
| 文件： | 总2页 (文件大小：290K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AD2360CSeries
Very Low Cost, 360W
DIN Rail Mount
Dual Output
AC/DC Power Supplies
New
Industrial
Supplies!!
Key Features:
• 360W Output Power
• DIN Rail Mountable
• Universal AC Input
• Dual Outputs
• UL ꢀ08 Compliant
• EN609ꢀ0 Compliant
• Cond./Rad. EMI Class B
• >100 kH MTBF
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
Parameter
Conditions
Min.
100
127
47
Typ.
Max.
240
370
63
Units
VAC
VDC
Hz
A
A
Universal
Input Voltage Range
Input Frequency
110 VAC
220 VAC
264 VAC
22
44
Inrush Current, Cold Start
Leakage Current
1.8
mA
• LOW COST!
Output
Parameter
Conditions
Min.
Typ.
0.ꢀ
10.0
1.0
1.0
10
Max.
Units
%
%
%
%
Output Voltage Accuracy
Output Voltage Adjustment Range
Line Regulation
Primary Output Only
Vin = Min to Max
Iout = 20% to 100%
110 VAC, Full Load
220 VAC, Full Load
Load Regulation (Note 1)
Hold Time
mSec
20
Ripple & Noise (20 MHz) (Note 2)
Output Power Protection
Transient Recovery Time (Note 3)
See Model Selection Guide
Power Limit 130
2
160
0.0ꢀ
Max.
%
mS
%
ꢀ0% Load Change
RoHS Compliant Transient Response Deviation
ꢀ
0.04
Temperature Coefficient
%/ºC
Output Short Circuit
General
Parameter
Continuous With Autorecovery
Models available
from 20W! Call
today for details
Conditions
Min.
Typ.
Units
Input - Output 3,000
Input - FG (Frame Ground) 2,000
Isolation Voltage
VAC
Output - FG (Frame Ground)
ꢀ00
100
Isolation Resistance (Note 4)
ꢀ00 VDC
Fixed
MΩ
kHz
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
Switching Frequency
Environmental
Parameter
Operating Temperature Range
Storage Temperature Range
Cooling
Humidity
Vibration
Physical
Case Size
130
Conditions
Min.
-20
Typ.
+2ꢀ
Max.
+ꢀ0
+8ꢀ
Units
ºC
ºC
Ambient
-20
Free Air Convection
RH, Non-condensing
10 Hz ~ 2 kHz; 2G 10 min./1 Cycle; X, Y, Z axis each 1 hour
T: (781) 344-8226
F: (781) 344-8481
E: sales@micropowerdirect.com
W: www.micropowerdirect.com
9ꢀ
%
4.76 x 4.33 x 3.94 Inches (121.0 x 110.0 x 100.0 mm)
Aluminum (Base) and Steel (Cover)
Screw Terminal
Case Material
Connection
Reliability Specifications
Parameter
Conditions
Min.
Typ.
Max.
Units
MTBF
MIL HDBK 217F, 2ꢀºC, Gnd Benign
100
kHours
Safety Standards
EMI Compliance
EMS Immunity Compliance
UL 19ꢀ0, EN 609ꢀ0, IEC 609ꢀ0
Compliance to ENꢀꢀ011, ENꢀꢀ022 (CISPR22) Class B
EN6100-4-2,3,4,ꢀ,6,8,11 Level 3
Model Selection Guide
Input
Voltage (VAC)
Universal Range 11ꢀ VAC 230 VAC
Output
Rated
Power
(W)
Overvoltage
Protection
(VDC)
Ripple &
Noise
(mV p-p)
Model
Number
Efficiency
(%, Typ)
Current (A)
Voltage Current (A) Current (A)
(VDC)
Max)
Range
+12 (V1)
+ꢀ (V2)
+24 (V1)
+ꢀ (V2)
48 (V1)
+ꢀ (V2)
28.0
3.0
14.0
3.0
7.0
3.0
0 ~ 28.0
0 ~ 3.0
0 ~ 14.0
0 ~ 3.0
0 ~ 7.0
0 ~ 3.0
14 ~ 16
N/A
27 ~ 30
N/A
ꢀ2 ~ ꢀ6
N/A
100
ꢀ0
1ꢀ0
ꢀ0
2ꢀ0
ꢀ0
AD23601C
AD23602C
360
360
360
100 - 240
100 - 240
100 - 240
1.0
1.0
1.0
0.ꢀ
0.ꢀ
0.ꢀ
78
80
80
AD23603C
Notes:
Derating Curve
1. Load regulation is specified for a load change
of 20% to 100%. For models AD23601C, load
regulation for V1 (12V) is 2%
2. Ripple & noise is measured using equipment with
20 Mhz of bandwidth with the unit under test
operating at rated load and a 110 VAC input.
Connection to the unit is made with a 0.1 μF /
630V metalized capacitor & a 47 μF electrolytic
capacitor connected in parallel.
3. Transient recovery is measured to within a 1%
error band for a load step change of ꢀ0% to
100%.
4. Isolation resistance is given for Input/Output and
Input/FG. For Output/FG., it is ꢀ0 MΩ
ꢀ. Overload protection is power limiting. The
unit recovers automatically when the fault is
removed.
6. Over voltage protection is a shut down type.
The unit recovers automatically when the fault
is removed.
7. To mount the unit to the DIN rail, tilt the unit
rearwards from the top, fitting the mount over
the top of the rail. Press back on the bottom front
of the unit until it locks in place on the rail. To
remove the unit from the rail, pull the removal
clip at the bottom rear of the unit downward
with a screw driver. With the clip down, lift up
on the unit from the bottom front until it clears
the rail. Before installation or removal all wiring
should be disconnected and the main power to
the system shut off.
Mechanical Dimensions
8. When wiring the supply, all lines should be as
thick and short as possible. AWG 14 wire is recom-
mended for the AD2360C series.
9. The units should be mounted so they are vertically
orientated. Air flow (if provided) would optimally
flow from the bottom to the top of the unit.
10. It is recommended that a fuse be used on the
input of a power supply for protection. For
the AD2360C series a 2ꢀ0VAC ꢀ.0A is recom-
mended.
Units with the optional “FT” outputs may be
easily connected for “Fault Tolerant operation.
Contact the factory for details
Connections TB 1
Pin
1
Function
FT (Optional)
2
FT (Optional)
3
+V2 (ꢀV) Output
Output Common
Output Common
+V1 Output
4
ꢀ
6
7
+V1 Output
Connections TB 2
Pin
1
Function
AC Input - Live
2
AC Input - Neutral
Frame Ground (FG
3
Notes:
• All dimensions are typical in inches (mm)
• Tolerance x.xx = 0.01 ( 0.2ꢀ)
MicroPower Direct
FAX: (781) 344-8481
www.micropowerdirect.com
292 Page Street Ste D Stoughton, MA 02072
•
TEL: (781) 344-8226
•
•
E-Mail: sales@micropowerdirect.com
相关型号：
©2020 ICPDF网 联系我们和版权申明