MGATEMB3660I-8-2AC [MOXA]
8 and 16-port redundant Modbus gateways;型号: | MGATEMB3660I-8-2AC |
厂家: | Moxa |
描述: | 8 and 16-port redundant Modbus gateways |
文件: | 总6页 (文件大小:899K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MGate MB3660 Series
8 and 16-port redundant Modbus gateways
Features and Benefits
• Supports Auto Device Routing for easy configuration
• Supports route by TCP port or IP address for flexible deployment
• Innovative Command Learning for improving system performance
• Supports agent mode for high performance through active and parallel
polling of serial devices
• Supports Modbus serial master to Modbus serial slave communications
• 2 Ethernet ports with the same IP or dual IP addresses for network
redundancy
• microSD card for configuration backup/duplication and event logs
• Accessed by up to 256 Modbus TCP clients
• Connects up to Modbus 128 TCP servers
• RJ45 serial interface (for “-J” models)
• Serial port with 2 kV isolation protection (for “-I” models)
• Dual VDC or VAC power inputs with wide power input range
• Embedded traffic monitoring/diagnostic information for easy troubleshooting
• Status monitoring and fault protection for easy maintenance
Certifications
Introduction
The MGate MB3660 (MB3660-8 and MB3660-16) gateways are redundant Modbus gateways that convert between the Modbus TCP and Modbus
RTU/ASCII protocols. They can be accessed by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices. The MGate
MB3660 isolation model provides 2 kV isolation protection suitable for power substation applications. The MGate MB3660 gateways are designed
to easily integrate Modbus TCP and RTU/ASCII networks. The MGate MB3660 gateways offer features that make network integration easy,
customizable, and compatible with almost any Modbus network.
For large-scale Modbus deployments, MGate MB3660 gateways can effectively connect a large number of Modbus nodes to the same network.
The MB3660 Series can physically manage up to 248 serial slave nodes for 8-port models or 496 serial slave nodes for 16-port models (the Modbus
standard only defines Modbus IDs from 1 to 247). Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus
ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway.
High Performance with Innovative Command Learning
The MGate MB3660 gateways support two communication modes: transparent mode and agent mode. For transparent mode, the gateway
converts Modbus commands from Modbus TCP to Modbus RTU/ASCII, and vice versa, or from serial (master) to serial (slave). However, since only
one Modbus protocol request-response action can be executed at any given time, each Modbus device has to wait its turn, resulting in poorer
performance.
In order to provide better performance, the MGate MB3660 gateways are designed with an innovative Command Learning function, which can be
activated with a single mouse click. Once activated, the gateway will learn and remember the Modbus commands it receives, and once a command
has been learned, the gateway will act as though it were in agent mode, and actively send Modbus requests to the relevant Modbus devices. Since
the data is saved in a different memory space that can be accessed by the SCADA system, the SCADA system can retrieve Modbus response data
directly from the gateway’s memory, instead of waiting for the data to pass through the Modbus devices, dramatically increasing communication
performance.
Auto-Device Routing for Easy Configuration (Patented)
Moxa’s Auto-Device Routing function helps eliminate many of the problems and inconveniences encountered by engineers who need to configure
large numbers of Modbus devices. A single mouse click is all that’s required to set up a slave ID routing table and configure Modbus gateways to
1
www.moxa.com
automatically detect Modbus requests from a supervisory control and data acquisition (SCADA) system. By removing the need to manually create
the slave ID routing table, the Auto-Device Routing function saves engineers significant time and reduces cost.
Modbus Gateway with Power and Ethernet Redundancy
For a complicated Modbus system, redundancy is extremely important. The MGate MB3660 Modbus gateways support redundancy for both the
power input and Ethernet connection. The MGate MB3660 gateways come with dual AC or DC power inputs built in for power redundancy, and
have dual Ethernet ports (with different IPs) for network redundancy. To accommodate different types of applications, the dual Ethernet ports can
be configured in one of two ways:
• Use the same IP for both Ethernet ports. In this case, the MGate MB3660 gateway will automatically switch to the backup LAN when the main
LAN fails.
• Use different IP addresses for each of the two Ethernet ports. In this case, Modbus clients/masters can use both Ethernet ports to communicate
with Modbus RTU/ASCII slave devices at the same time.
Specifications
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
2 IP addresses
Auto MDI/MDI-X connection
Ethernet Software Features
Industrial Protocols
Modbus TCP Client (Master), Modbus TCP Server (Slave)
Configuration Options
Management
Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console
ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP,
Telnet, UDP, NTP Client, RADIUS
MIB
RFC1213, RFC1317
NTP Client
Time Management
Serial Interface
Console Port
RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
No. of Ports
MGate MB3660-8 Series: 8
MGate MB3660-16 Series: 16
Serial Standards
Connector
RS-232/422/485 (software selectable)
MGate MB3660-8/16: DB9 male
MGate MB3660-8/16-J: RJ45
Baudrate
50 bps to 921.6 kbps
Data Bits
7, 8
Parity
None, Even, Odd, Space, Mark
1, 2
Stop Bits
Flow Control
RTS/CTS, DTR/DSR, RTS Toggle (RS-232 only)
ADDC® (automatic data direction control)
1 kilo-ohm, 150 kilo-ohms
120 ohms
RS-485 Data Direction Control
Pull High/Low Resistor for RS-485
Terminator for RS-485
Isolation
2 kV (I models)
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Tx+, Tx-, Rx+, Rx-, GND
RS-422
2
www.moxa.com
RS-485-2w
RS-485-4w
Data+, Data-, GND
Tx+, Tx-, Rx+, Rx-, GND
Serial Software Features
Industrial Protocols
Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave
Serial Console
Configuration Options
Modbus RTU/ASCII
Mode
Master, Slave
Functions Supported
Max. No. of Commands
Memory Size
1, 2, 3, 4, 5, 6, 15, 16, 23
256 per serial port
65535 bytes
Modbus TCP
Mode
Client (Master), Server (Slave)
Max. No. of Client Connections
Max. No. of Server Connections
Functions Supported
256
128
1, 2, 3, 4, 5, 6, 15, 16, 23
256
Max. No. of Commands
Memory Size
65535 bytes
Modbus (Transparent)
Max. No. of Client Connections
256
128
Max. No. of Server Connections
Power Parameters
Input Voltage
All models: Redundant dual inputs
AC models: 100 to 240 VAC (47 to 63 Hz)
DC models: 20 to 60 VDC (1.5 kV isolation)
No. of Power Inputs
Power Connector
Power Consumption
2
Terminal block (for DC models)
MGate MB3660-8-2AC: 144 mA @ 110 VAC
MGate MB3660-8-J-2AC: 111 mA @ 110 VAC
MGate MB3660-16-2AC: 178 mA @ 110 VAC
MGate MB3660-16-J-2AC: 133 mA @ 110 VAC
MGate MB3660I-8-2AC: 310 mA @ 110 VAC
MGate MB3660I-16-2AC: 310 mA @ 110 VAC
MGate MB3660-8-2DC: 312 mA @ 24 VDC
MGate MB3660-16-2DC: 390 mA @ 24 VDC
Relays
Contact Current Rating
Resistive load: 2 A @ 30 VDC
Physical Characteristics
Housing
Metal
IP Rating
IP30
Dimensions (with ears)
480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
3
www.moxa.com
Dimensions (without ears)
Weight
440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
MGate MB3660-8-2AC: 2731 g (6.02 lb)
MGate MB3660-8-2DC: 2684 g (5.92 lb)
MGate MB3660-8-J-2AC: 2600 g (5.73 lb)
MGate MB3660-16-2AC: 2830 g (6.24 lb)
MGate MB3660-16-2DC: 2780 g (6.13 lb)
MGate MB3660-16-J-2AC: 2670 g (5.89 lb)
MGate MB3660I-8-2AC: 2753 g (6.07 lb)
MGate MB3660I-16-2AC: 2820 g (6.22 lb)
Environmental Limits
Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature (package included)
Ambient Relative Humidity
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
Standards and Certifications
Safety
EN 60950-1, UL 60950-1
EN 55032/24
EMC
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Freefall
Shock
IEC 60068-2-31
IEC 60068-2-27
Vibration
IEC 60068-2-6, IEC 60068-2-64
MTBF
Time
MGate MB3660-8-2AC: 716,647 hrs
MGate MB3660-8-2DC: 706,783 hrs
MGate MB3660-8-J-2AC: 616,505 hrs
MGate MB3660-16-2AC: 487,416 hrs
MGate MB3660-16-2DC: 482,835 hrs
MGate MB3660-16-J-2AC: 437,337 hrs
MGate MB3660I-8-2AC: 429,807 hrs
MGate MB3660I-16-2AC: 256,208 hrs
Standards
Telcordia SR332
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x MGate MB3660 Series gateway
1 x power cord, suitable for your region
1 x RJ45-to-DB9 console cable
1 x wall-mounting kit
Power Supply
Cable
Installation Kit
Documentation
1 x quick installation guide
1 x warranty card
4
www.moxa.com
Dimensions
Ordering Information
Model Name
No. of Serial Ports
Serial Connector
DB9 male
Serial Isolation
Input Voltage
MGate MB3660-8-2DC
MGate MB3660-16-2DC
MGate MB3660-8-2AC
MGate MB3660-16-2AC
MGate MB3660I-8-2AC
8
16
8
–
–
20-60 VDC (1.5 kV isolation)
20-60 VDC (1.5 kV isolation)
100-240 VAC (47-63 Hz)
100-240 VAC (47-63 Hz)
100-240 VAC (47-63 Hz)
DB9 male
DB9 male
–
16
8
DB9 male
–
DB9 male
2 kV
5
www.moxa.com
Model Name
No. of Serial Ports
Serial Connector
DB9 male
RJ45
Serial Isolation
Input Voltage
MGate MB3660I-16-2AC
MGate MB3660-8-J-2AC
MGate MB3660-16-J-2AC
16
8
2 kV
100-240 VAC (47-63 Hz)
100-240 VAC (47-63 Hz)
100-240 VAC (47-63 Hz)
–
–
16
RJ45
Accessories (sold separately)
Cables
CBL-F9M9-150
CBL-F9M9-20
DB9 female to DB9 male serial cable, 1.5 m
DB9 female to DB9 male serial cable, 20 cm
RJ45 to DB9 female serial cable, 1.5 m
CBL-RJ45F9-150
CBL-RJ45SF9-150
RJ45 to DB9 female serial shielded cable, 1.5 m
Connectors
Mini DB9F-to-TB
DB9 female to terminal block connector
Rack-Mounting Kits
WK-45-01
Wall-mounting kit, 2 L-shaped plates, 6 screws, 45 x 57 x 2.5 mm
Power Cords
PWC-C13AU-3B-183
PWC-C13CN-3B-183
PWC-C13EU-3B-183
PWC-C13JP-3B-183
PWC-C13UK-3B-183
PWC-C13US-3B-183
CBL-PJTB-10
Power cord with Australian (AU) plug, 1.83 m
Power cord with three-prong China (CN) plug, 1.83 m
Power cord with Continental Europe (EU) plug, 1.83 m
Power cord with Japan (JP) plug, 7A/125V, 1.83 m
Power cord with United Kingdom (UK) plug, 1.83 m
Power cord with United States (US) plug, 1.83 m
Non-locking barrel plug to bare-wire cable
© Moxa Inc. All rights reserved. Updated Feb 25, 2020.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
6
www.moxa.com
相关型号:
©2020 ICPDF网 联系我们和版权申明