MC13159 [MOTOROLA]
WIDEBAND FM IF SUBSYSTEM FOR PHS AND DIGITAL APPLICATIONS; WIDEBAND调频中频子系统，小灵通和数字应用
| 型号： | MC13159 |
| 厂家： | 
MOTOROLA |
| 描述： | WIDEBAND FM IF SUBSYSTEM FOR PHS AND DIGITAL APPLICATIONS |
| 文件： | 总8页 (文件大小：157K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Order this document by MC13159/D
WIDEBAND FM IF
SUBSYSTEM FOR PHS
AND DIGITAL
The MC13159 is a wideband FM IF subsystem that is designed for high
performance data and digital applications. Excellent high frequency
performance is achieved, with low cost, through the use of Motorola’s RF
bipolar process. The MC13159 includes a mixer, local oscillator buffer
amplifier, IF amplifier, limiter amplifier and RSSI functions. The mixer is
useful for a 240 MHz input used in a single–ended/balanced differential
configuration. The IF and limiter amplifier are separated so that an external
filter can be used in series, or connected directly with an external capacitor.
The RSSI output is derived by summing the output of both the IF and
Limiter sections. An enable control is provided to power down the IC for
power management in battery powered applications.
APPLICATIONS
SEMICONDUCTOR
TECHNICAL DATA
Suitable applications include PHS, DECT, PDC, and PCS telephones,
wideband wireless data links, and other battery powered radio systems.
16
• Designed for PHS Applications
1
• 2.7 to 5.5 V Operating Voltage
• Low Drain Current: 5.5 mA (Typ)
• Wide Input Dynamic Range of Mixer (Maximum –16 dBm Input)
• Enable Function for Power Down Mode
DTB SUFFIX
PLASTIC PACKAGE
CASE 948F
(TSSOP–16)
• Over 80 dB of RSSI Dynamic Range (AC Coupling between IF Amplifier
and Limiter Amplifier)
ORDERING INFORMATION
Operating
• Few External Components Required
Temperature Range
Device
Package
MC13159DTB
T
A
= –30° to +85°C
TSSOP–16
Simplified Block Diagram
Mix
V
Mix
IF
IF
IF
IF
Enable
13
in
16
EE
15
out
14
in
12
Dec1
11
Dec2
out
9
10
IF Amp
Mixer
RSSI
LIM
Amp
Local
Oscillator
Buffer
1
2
3
4
5
LIM
6
7
8
Mix
Decoup
V
LO
in
RSSI
LIM
out
LIM
Dec1
LIM
in
CC
Dec2
This device contains 164 active transistors.
This document contains information on a new product. Specifications and information herein
Motorola, Inc. 1997
Rev 1
are subject to change without notice.
MC13159
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Power Supply Voltage
Junction Temperature
V
6.0
Vdc
S(max)
T
150
°C
Jmax
Storage Temperature Range
T
stg
–65 to +150
°C
NOTE: ESD data available upon request.
RECOMMENDED OPERATING CONDITIONS
Rating
Symbol
Value
2.7 to 5.5
10 to 600
–30 to +85
–10
Unit
Vdc
MHz
°C
Power Supply Voltage
V
S
Input Frequency
f
in
Ambient Temperature Range
Input Signal Level at Local Input
T
A
V
in
dBm
DC ELECTRICAL CHARACTERISTICS (T = 25°C, V = 3.0 V; No Input Signal)
A
S
Characteristics
Total Drain Current 1
Conditions
Symbol
Min
4.5
–
Typ
5.5
0.1
Max
7.5
10
Unit
mA
µA
Active Mode
I
I
CC1
Total Drain Current 2
Disable Mode
CC2
AC ELECTRICAL CHARACTERISTICS
Characteristics
Conditions
Symbol
Min
Typ
Max
Unit
MIXER (T = 25°C; V = 3.0; f
RF
= 240 MHz, f
= 229.3 MHz)
LO
A
S
Mixer Conversion Gain
50 Ω Termination
Input Matched
–
11
–
14
21
17
–
dB
dB
Noise Figure
Input Matched
Single–Ended
NF
–
14
–
Mixer Input Impedance
Rp
Cp
–
–
400
4.0
–
–
Ω
pF
Mixer Output Impendance
1.0 dB Gain Compression
3rd Order Input Intercept
–
–
–
–
–
330
–16
–8.0
–
–
–
Ω
@Mix
in
Vicp
IIP3
dBm
dBm
50 Ω Termination
IF AMPLIFIER SECTION (T = 25°C; V = 3.0 V; f = 10.7 MHz)
IF
A
S
IF Gain
f = 10.7 MHz
–
–
–
32
–
36
45
–
dB
Ω
Input Impedance
Output Impedance
–
–
330
330
–
–
Ω
LIMITING AMPLIFIER SECTION (T = 25°C; V = 3.0 V; f = 10.7 MHz)
A
S
IF
Limiter Gain
f = 10.7 MHz
–
–
–
–
–
–
–
70
330
500
10
–
–
dB
Input Impedance
Output Swing
–
–
–
–
Ω
400
–
600
–
Output Rise Time
Output Fall Time
–
20
–
RSSI SECTION (T = 25°C; V = 3.0 V; f = 10.7 MHz)
IF
A
S
RSSI Slope
–
–
–
–
–
–
–
10
14
0.9
0.95
1.0
1.5
2.1
18
mV/dB
RSSI Output DC Voltage 1
RSSI Output DC Voltage 2
RSSI Output DC Voltage 3
RSSI Output DC Voltage 4
RSSI Output DC Voltage 5
No Input Signal
0.8
1.0
V
V
V
= –85 dBm
= –80 dBm
= –40 dBm
0.82
0.85
1.4
1.02
1.15
1.6
IF
IF
IF
V
= 0 dBm
1.95
2.25
in
2
MOTOROLA ANALOG IC DEVICE DATA
MC13159
Figure 1. Test Circuit
IF
in
10.7 MHz
Mix
out
10.7 MHz
S1
a
b
V
50
IF
out
V
10 n
10.7 MHz
10 n
330
RF
in
1.0 n
IF
1.0 n
240 MHz
50
DCI
10 n
IF
10 n
39 p
16
15
V
14
13
Enable
12
in
11
10
IF
9
Mix
Mix
IF
out
Dec1
Dec2
in
out
EE
IF
Mixer
39 p
RSSI
Local
Oscillator
Buffer
LIM
Mix
Decoup
V
LO
RSSI
LIM
5
LIM
out
LIM
Dec1
LIM
in
CC
2
in
Dec2
1
3
4
6
7
8
220 p
47 p
10 n
1.0 n
10 n
1.0 n
V
100 n
DCI
10 n
10 p
(From Probe
Impedance)
10 k
V
CC
50
V
Local Osc Input
229.3 MHz
–10 dBm
3
MOTOROLA ANALOG IC DEVICE DATA
MC13159
Figure 2. Test Circuit for Evaluation
V
V
mixo
IF
10 n
10 n
IF
Mix
10.8 MHz
in
10.8 MHz
out
50
330
CF1
RF
in
248.5 MHz
V
mix
100 p
V
EE
100 p
1.0 n
51
0
16
15
14
out
13
Enable
12
11
Dec1
10
IF
9
IF
Mix
Mix
IF
out
IF
V
Dec2
in
in
EE
IF
Mixer
39 p
CF2
RSSI
Local
Oscillator
Buffer
LIM
39 p
Mix
Decoup
V
LO
RSSI
LIM
LIM
out
LIM
Dec1
LIM
in
CC
2
in
Dec2
1
3
4
6
7
8
5
1.0 n
220 p
100 p
1.0 n
47 p
RSSI
100 p
1.0 n
10 k
LIM
10.8 MHz
0.5 Vpp
out
100 n
T.P
10 n
V
CC
10 p
V
osc
51
RF Input Matching Circuit
NOTES: 1. CF1: Murata CFEC10.8MK1
Local Osc Input
237.7 MHz
(single filter application) or Murata
CFEC10.8MG1 (dual filters application)
(To Pin 16)
2. CF2: Murata CFEC10.8ME1 (dual
filters application)
: BNC (unless otherwise specified)
: Banana Jack
22 p
NOTE: All resistors and capacitors are the chip components
4.0 p
except coupling at CF2.
47 nH
Text boards are for the TSSOP package and socket.
4
MOTOROLA ANALOG IC DEVICE DATA
MC13159
PIN FUNCTION DESCRIPTION
Pin
Symbol
Internal Equivalent Circuit
Description
1
Mix Decoup
Mixer Decoupling
Mixer decoupling pin. 220 pF is decoupled to the RF
ground. This pin also can be used for differential input
V
V
CC
CC
with Mix .
in
1.0 k
1.0 k
1
16
16
Mix
in
Mixer Input
Input impedance is about 400 Ω at 240 MHz.
Single–ended matching section at 240 MHz is
referenced at application circuit.
2
3
V
Supply Voltage
CC
Supply voltage range range is from 2.7 Vdc to
5.5 Vdc. 1.0 nF of decoupling capacitor is placed
directly at this pin to reduce the floor noise.
LO
in
Local Oscillator Input
Connected to external local oscillator. Input
impedance is about 900 Ω at 230 MHz.
V
CC
V
CC
1.0 k
3
V
4
RSSI
RSSI
CC
The RSSI current creates a voltage drop across an
internal 15 kΩ resistor.
V
CC
4
15 k
5
7
LIM
LIM
Limiter Decoupling
Dec2
Dec1
V
CC
Limiter decoupling pins. Decoupling capacitors are
connected to the RF ground, and one is placed
between Dec1 and Dec2.
V
V
V
CC
CC CC
5
8
330
8
6
LIM
LIM
Limiter Input
The input impedance is 330 Ω; it matches the
330 input resistance of a 10.7/10.8 MHz ceramic filter.
in
7
V
Limiter Output
The output level is about 0.5 Vpp.
out
CC
V
CC
10
6
800 µA
5
MOTOROLA ANALOG IC DEVICE DATA
MC13159
PIN FUNCTION DESCRIPTION (continued)
Internal Equivalent Circuit
Pin
Symbol
Description
9
IF
out
V
IF Output
CC
The output impedance is 330 Ω; it matches the
330 input resistance of a 10.7/10.8 MHz ceramic filter.
V
CC
220
9
300 µA
10
11
IF
Dec2
IF
Dec1
IF Decoupling
V
CC
IF decoupling pins. Decoupling capacitor is connected
from Dec1 to the RF ground, and one is placed
between Dec1 and Dec2.
V
V
V
CC
CC CC
11
12
10
330
12
13
IF
IF Input
in
The input impedance is 330 Ω; it matches the
330 input resistance of a 10.7/10.8 MHz ceramic filter.
Enable
Enable
V
CC
V
CC
The IC regulators are enabled by placing this pin at
V
EE
.
13
40 k
V
14
Mix
out
Mixer Output
CC
The mixer output impedance is 330 Ω; it matches the
330 input resistance of a 10.7/10.8 MHz ceramic filter.
V
6.0 k
CC
220
14
700 µA
15
V
EE
Supply Ground
6
MOTOROLA ANALOG IC DEVICE DATA
MC13159
OUTLINE DIMENSIONS
DTB SUFFIX
PLASTIC PACKAGE
CASE 948F–01
(TSSOP–16)
ISSUE O
16X KREF
0.10 (0.004)
M
S
S
T
U
V
S
0.15 (0.006) T
U
K
K1
NOTES:
1
DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
16
9
2X L/2
J1
2
3
CONTROLLING DIMENSION: MILLIMETER.
DIMENSION A DOES NOT INCLUDE MOLD FLASH.
PROTRUSIONS OR GATE BURRS. MOLD FLASH
OR GATE BURRS SHALL NOT EXCEED 0.15
(0.006) PER SIDE.
DIMENSION B DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED
0.25 (0.010) PER SIDE.
DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN
EXCESS OF THE K DIMENSION AT MAXIMUM
MATERIAL CONDITION.
B
–U–
SECTION N–N
L
J
4
5
PIN 1
IDENT.
8
1
N
0.25 (0.010)
S
0.15 (0.006) T
U
A
M
6
7
TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
DIMENSION A AND B ARE TO BE DETERMINED
AT DATUM PLANE –W–.
–V–
N
F
MILLIMETERS
INCHES
DIM
A
B
C
D
F
G
H
J
J1
K
MIN
4.90
4.30
–––
0.05
0.50
MAX
5.10
4.50
1.20
0.15
0.75
MIN
MAX
0.200
0.177
0.047
0.006
0.030
0.193
0.169
–––
0.002
0.020
DETAIL E
–W–
C
0.65 BSC
0.026 BSC
0.18
0.09
0.09
0.19
0.19
0.28
0.20
0.16
0.30
0.25
0.007
0.004
0.004
0.007
0.007
0.011
0.008
0.006
0.012
0.010
0.10 (0.004)
DETAIL E
H
SEATING
PLANE
–T–
D
G
K1
L
6.40 BSC
0.252 BSC
M
0
8
0
8
7
MOTOROLA ANALOG IC DEVICE DATA
MC13159
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specificallydisclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
datasheetsand/orspecificationscananddovaryindifferentapplicationsandactualperformancemayvaryovertime. Alloperatingparameters,including“Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applicationsintended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
ordeathmayoccur. ShouldBuyerpurchaseoruseMotorolaproductsforanysuchunintendedorunauthorizedapplication,BuyershallindemnifyandholdMotorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
Opportunity/Affirmative Action Employer.
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315
Mfax : RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
INTERNET: http://www.mot.com/SPS/
MC13159/D
相关型号：
©2020 ICPDF网 联系我们和版权申明