URE1D24LD-20WR3 [MORNSUN]
20W, Ultra wide input, isolated & regulated Dual output, DC/DC converter;型号: | URE1D24LD-20WR3 |
厂家: | MORNSUN SCIENCE& TECHNOLOGY LTD. |
描述: | 20W, Ultra wide input, isolated & regulated Dual output, DC/DC converter |
文件: | 总8页 (文件大小:3119K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converter
URE1D_LD-20WR3 Series
20W, Ultra wide input, isolated & regulated Dual output,
DC/DC converter
FEATURES
Ultra wide input voltage range (4:1)
Enhanced isolation, Isolation voltage: 3K VDC &
1.5K VAC
Operating temperature range: -40℃ to +85℃
Input Under-voltage Protection, Output short
circuit, over-current, over–voltage protection
Low ripple & noise
Meet EN50121-3-2 CISPR32/EN55032 CLASS A,
without external components
Meets requirements of railway standard EN50155
Reverse voltage protection available with
A2S(Chassis mounting) or A4S(35mm DIN-Rail
mounting)
Meets IEC60950, UL60950, EN60950 standards
Meets requirements of railway standard EN50155
International standard pin-out
Patent Protection RoHS
URE1D_LD-20WR3 series are isolated 20W DC-DC products with 4:1 input voltage .Their feature efficiency up to 86%, 3000VDC &1500VAC
isolation with enhanced isolation, operating temperature of -40℃ to +85℃, Input Under-voltage Protection, Output short circuit,
over-current, over–voltage protection.Railway vehicle electronic equipment widely used in 72V, 96V and 110V.
Selection Guide
④
Input Voltage (VDC)
②
Output
Efficiency
(%,Min./Typ.)
@ Full Load
Max. Capacitive
①
Certification
Part No.
⑤
Nominal
Output Voltage
(VDC)
Output Current
(mA)(Max./Min.)
③
Load(µF)
Max.
(Range)
URE1D12LD-20WR3
URE1D15LD-20WR3
URE1D24LD-20WR3
±12
±15
±24
±833/0
83/85
84/86
84/86
680
470
220
110
170
--
±667/0
(40-160)
±417/0
Note:
①Series with suffix “H” are heat sink mounting; series with suffix “A2S” are chassis mounting,with suffix “A4S” are DIN-Rail mounting, for example
URE1D12LD-20WHR3A2S is chassis mounting of with heat sink, URE1D12LD-20WR3A4S is DIN-Rail mounting of without heat sink; If the application has a higher
requirement for heat dissipation, you can choose modules with heat sink;
②A2S (wiring) and A4S (rail) Model due to input reverse polarity protection function, input voltage range the minimum value and starting voltage is higher than
1VDC DIP package;
③Absolute maximum rating without damage on the converter, but it isn't recommended;
④Efficiency is measured In nominal input voltage and rated output load;A2S (wiring) and A4S (rail) Model due to input reverse polarity protection, minimum
efficiency greater than Min.-2 is qualified.
⑤For the dual output modules, the capacitive loads of positive and negative outputs are the same.
Input Specifications
Item
Operating Conditions
Min.
Typ.
Max.
Unit
mA
Input Current (full load / no-load) Nominal input voltage
--
--
212/3
25
--
217/8
--
Reflected Ripple Current
Surge Voltage (1sec. max.)
Starting Voltage
Shutdown Voltage
Starting Time
Nominal input voltage
-0.7
--
180
40
100% load
VDC
ms
--
33
10
28
--
--
Nominal input voltage & constant resistance load
--
Input Filter
Pi filter
Unavailable
Hot Plug
Ctrl suspended or connected to TTL high level
(3.5-12VDC)
Module switch on
Ctrl*
Module switch off
Ctrl pin connected to GND or low level (0-1.2VDC)
Input current when switched off
mA
--
2
7
Note: * the voltage of Ctrl pin is relative to input pin GND.
2017.11.23-A/0
Page 1 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URE1D_LD-20WR3 Series
Output Specifications
Item
Operating Conditions
Min.
--
Typ.
±1
Max.
±2
Unit
%
Positive output
Negative output
Positive output
Negative output
Positive output
Negative output
Voltage Accuracy
0% -100% load
--
±1
±3
±0.2
±0.5
±0.5
±0.5
±0.5
±1
--
Full load, the input voltage is
from low voltage to high voltage
Line Regulation
--
±1
--
Load Regulation*
Cross Regulation
5% -100% load
±1.5
--
Dual output, main output 50% load,
Supplement output from 10% - 100% load
--
--
±5
Transient Recovery Time
Transient Response Deviation
Temperature Coefficient
Ripple & Noise **
--
--
300
±3
500
±5
µs
%
25% load step change, nominal input voltage
Full load
--
--
±0.02
50
±0.03
100
160
210
%/
℃
20MHz bandwidth, 5% -100% load
mV p-p
Over-voltage Protection
Over-current Protection
Short circuit Protection
110
120
--
Input voltage range
--
%Io
Continuous, self-recovery
Note: *When testing from 0% -100%load working conditions, load regulation index of ±5%;
** 0%-5% load ripple&Noise is no more than 5%Vo.Ripple and noise are measured by ”parallel cable” method, please see DC-DC Converter Application
Notes for specific operation.
General Specifications
Item
Operating Conditions
Input-output, with the test time of 1 minute and the
leak current lower than 1mA
Min.
Typ.
--
Max.
--
Unit
3000
VDC
Input/output-casing, with the test time of 1 minute
and the leak current lower than 1mA
Input-output, with the test time of 1 minute and the
leak current lower than 5mA
Insulation Voltage
1500
1500
--
--
--
--
VDC
VAC
MΩ
Insulation Resistance
Isolation Capacitance
Operating Temperature
Storage Temperature
Storage Humidity
Input-output, isolation voltage 500VDC
Input-output, 100KHz/0.1V
see Fig. 1
1000
--
--
2200
--
--
--
pF
-40
-55
5
+85
+125
95
℃
--
Non-condensing
--
%RH
℃
Pin Welding Resistance
Temperature
Welding spot is 1.5mm away from the casing, 10
seconds
--
--
--
300
--
Switching Frequency*
Vibration
PWM mode
300
KHz
IEC 61373 car body 1 B mold
MIL-HDBK-217F@25℃
MTBF
1000
-- --
K hours
Note: * This series of products using reduced frequency technology, the switching frequency is test value of full load,When the load is reduced to below 50%, the
switching frequency decreases with decreasing load.
Physical Specifications
Casing Material
Aluminum alloy
Horizontal package
50.80*25.40*11.80mm
76.00*31.50*21.20 mm
76.00*31.50*25.80 mm
51.40*26.20*16.50mm
76.00*31.50*25.30 mm
76.00*31.50*29.90 mm
26g/48g/68g(Typ.)
Without heat sink
With heat sink
A2S wiring package
A4S rail package
Package Dimensions
Horizontal package
A2S wiring package
A4S rail package
Without heat sink
With heat sink
Horizontal package/A2S wiring package/A4S rail package
Horizontal package/A2S wiring package/A4S rail package
Weight
34g/56g/76g(Typ.)
Cooling Method
Free air convection
2017.11.23-A/0
Page 2 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URE1D_LD-20WR3 Series
EMC Specifications(EN60950)
CE
CISPR32/EN55032
CISPR32/EN55032
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
CLASS A(without external components)/CLASS B(see Fig. 5 for recommended circuit)
CLASS A(without external components)/CLASS B (see Fig.5 for recommended circuit)
EMI
RE
ESD
RS
Contact ±6KV/Air ±8KV
perf. Criteria B
perf. Criteria A
perf. Criteria B
20V/m
EFT
±4KV (see Fig.3 or Fig.4 for recommended circuit)
EMS
line to line ±2KV (2Ω 18uF see Fig.3 for recommended circuit)
line to ground ±4KV (12Ω 9uF see Fig.3 for recommended circuit)
Surge
CS
IEC/EN61000-4-5
IEC/EN61000-4-6
perf. Criteria B
perf. Criteria A
10 Vr.m.s
EMC Specifications(EN50155)
EN50121-3-2 150kHz-500kHz 99dBuV (see Fig.5 for recommended circuit)
EN55016-2-1 500kHz-30MHz 93dBuV
EN50121-3-2 30MHz-230MHz 40dBuV/m at 10m (see Fig.5 for recommended circuit)
EN55016-2-1 230MHz-1GHz 47dBuV/m at 10m
CE
EMI
RE
ESD
RS
EN50121-3-2 Contact ±6KV/Air ±8KV
perf. Criteria B
EN50121-3-2 20V/m
perf. Criteria A
perf. Criteria A
perf. Criteria B
perf. Criteria A
EMS
EFT
EN50121-3-2 ±2kV 5/50ns 5kHz (see Fig.3 or Fig.4 for recommended circuit)
EN50121-3-2 line to line ±1KV (42Ω 0.5uF see Fig.4 for recommended circuit)
EN50121-3-2 0.15MHz-80MHz 10 Vr.m.s
Surge
CS
Product Characteristic Curve
Temperature Derating Curve
120
100
80
60
40
20
0
Without heatsink
With heatsink
Safe Operating Area
-40
0
40 6571 85
120
℃
Operating Temperature(
)
Fig. 1
2017.11.23-A/0
Page 3 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URE1D_LD-20WR3 Series
Design Reference
1. Typical application
All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery.
If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product.
Vout(VDC)
±12/±15
±24
Fuse
Cin
Cout
220µF
100µF
2A,slow blow
10µF - 47µF
Fig. 2
2. EMC module solution-recommended circuit
Fig. 3 Parameter description
Output voltage
FUSE
±12V
±15V
±24V
Choose according to actual input current
FC-CX1D is the EMC auxiliary component of
our company. Input voltage range: 40V-160V
FC-CX1D
C0
100µF/200V
47µF/200V
Fig. 3
C1
C2
220µF/25V
1000pF/400VAC
100µF/35V
±24V
CY1、CY2
Fig. 4/Fig. 5 Parameter description
Output voltage
±12V
±15V
100µF/200V
0.22µF/250V
47µF/200V
C0
C1、C2
C3
Fig. 4
30mH ( common mode
inductance)
LCM1、LCM2
CY1、CY2、
CY3、CY4
C4
1000pF/400VAC
2200pF/400VAC
220µF/25V
100µF/35V
Fig. 5
3. It is not allowed to connect modules output in parallel to enlarge the power
4. For more information please find DC-DC converter application notes on www.mornsun-power.com
2017.11.23-A/0
Page 4 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URE1D_LD-20WR3 Series
Horizontal Package (without heat sink) Dimensions and Recommended Layout
Horizontal Package (with heat sink) Dimensions
2017.11.23-A/0
Page 5 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URE1D_LD-20WR3 Series
URB1D_LD-20WR3A2S (without heatsink) Dimensions
URB1D_LD-20WHR3A2S (with heatsink) Dimensions
2017.11.23-A/0
Page 6 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URE1D_LD-20WR3 Series
URB1D_LD-20WR3A4S (without heatsink) Dimensions
URB1D_LD-20WHR3A4S (with heatsink) Dimensions
2017.11.23-A/0
Page 7 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URE1D_LD-20WR3 Series
Note:
1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com.The
Packing bag number of Horizontal package :58200035(without heat sink), 58200051(with heat sink), A2S/ A4S package number:
58220022;
2. The maximum capacitive load offered were tested at input voltage range and full load;
3. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75% with nominal
input voltage and rated output load;
4. All index testing methods in this datasheet are based on our Company’s corporate standards;
5. We can provide product customization service, please contact our technicians directly for specific information;
6. Products are related to laws and regulations: see "Features" and "EMC";
7. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by
qualified units.
Mornsun Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801
Fax: 86-20-38601272
E-mail: info@mornsun.cn
2017.11.23-A/0
Page 8 of 8
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
相关型号:
URE2405LP-10WR3
10W, Ultra wide input isolated & regulated dual/single Output,DC-DC converter
MORNSUN
URE2412LP-10WR3
10W, Ultra wide input isolated & regulated dual/single Output,DC-DC converter
MORNSUN
URE2415LP-10WR3
10W, Ultra wide input isolated & regulated dual/single Output,DC-DC converter
MORNSUN
URE4805LP-10WR3
10W, Ultra wide input isolated & regulated dual/single Output,DC-DC converter
MORNSUN
URE4812LP-10WR3
10W, Ultra wide input isolated & regulated dual/single Output,DC-DC converter
MORNSUN
URE4815LP-10WR3
10W, Ultra wide input isolated & regulated dual/single Output,DC-DC converter
MORNSUN
©2020 ICPDF网 联系我们和版权申明