LS01-15B12S [MORNSUN]
LS01 Series ----- are high efficiency green power modules with miniature packaging provided by Mornsun.; LS01系列-----高效率绿色电源模块金升阳所提供的微型封装。
| 型号： | LS01-15B12S |
| 厂家： | 
MORNSUN SCIENCE& TECHNOLOGY LTD. |
| 描述： | LS01 Series ----- are high efficiency green power modules with miniature packaging provided by Mornsun. |
| 文件： | 总4页 (文件大小：412K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LS01 Series
1W, HIGH VOLTAGE DC-DC(AC-DC) CONVERTER
LS01 Series ----- are high efficiency green power modules with miniature
packaging provided by Mornsun. The features of this series are: wide input
voltage, DC and AC all in one, high efficiency, high reliability, low loss, safety
isolation etc, meet UL60950/EN60950 standards. All models are particularly
suitable for the applications demanding on the volume, need to meet UL/CE
standard, less demanding on EMC like industrial, electric power,
instrumentation, smart home. For harsh EMC environment, this series of
products must use the refered application circuit.
RoHS
FEATURES
PART NUMBER SYSTEM
LS01-15B15S
1. Wide input voltage:100 ~ 400VDC(85 ~ 264VAC)
2. Over current protection and short circuit protection
3. High efficiency, high density
4. Low loss, green power
5. Industrial level
6. Ultra-Miniature package
Special Mark
Output Voltage
Output Style
put Voltage
In
Voltage
Isolation
Output Power
Package Style
Product Series
7. Meet UL/CE standard
SELECTION GUIDE
Package
(Typ.)
Efficiency (%)
Output (Vo/Io)
Ripple and Noise
Model
Power
1W
(Typ.)
66
LS01-15B05S
LS01-15B09S
LS01-15B12S
LS01-15B15S
LS01-15B24S
5V/200mA
9V/111mA
100mV(Typ.)
150mV(Max.)
120mV(Max.)
120mV(Max.)
120mV(Max.)
150mV(Max.)
67
80mV(Typ.)
80mV(Typ.)
80mV(Typ.)
100mV(Typ.)
34.0*26.0*10.5mm
70
12V/83.3mA
15V/66.6mA
24V/41.6mA
69
68
INPUT SPECIFICATIONS
Input voltage range
100~400VDC(85~264VAC)
120mA (Max.)
20A
Input current
Inrush current
External input fuse (recommended)
1A/250V
slow blow
OUTPUT SPECIFICATIONS
-25℃~+55℃
-40℃~+85℃
±5%
LS01-15B05S
±10%
LS01-15B09S
LS01-15B12S
LS01-15B15S
LS01-15B24S
Voltage set accuracy
-25℃~+55℃
-40℃~+85℃
±3%
±5%
Input variation
±1.5% (Typ.)
±2.5% (Typ.)
100mV(Typ.)
80mV(Typ.)
80mV(Typ.)
80mV(Typ.)
100mV(Typ.)
Load variation (5%~100%)
5 VDC output
9 VDC output
12VDC output
15VDC output
24VDC output
150mV(Max.)
120mV(Max.)
120mV(Max.)
120mV(Max.)
150mV(Max.)
Ripple & noise(p-p)
(20MHz Bandwidth)
Note :Low frequency ripple is
normal.
Short circuit protection
Continuous, automatic resume
No
Over temperature protection
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
LS01 series A/0-2012 Page 1 of 4
COMMON SPECIFICATIONS
Operating
-40℃～+85℃
1.33%/ ℃
(55～85℃)
Power
derating
Temperature ranges
2%/ ℃
(-40℃～-20℃)
-40℃～+105℃
Storage
The Max. Case Temperature +90℃ (Max.)
Humidity
85% (Max.)
0.1%/℃
Temperature coefficient
Switching frequency
I/O-isolation voltage
Variational Frequency 50KHz (Max.)
Input and Output
CE
3000VAC/1Min
CISPR22/EN55022 CLASS A（External Circuit Refer to Figure 1）
CISPR22/EN55022 CLASS B（External Circuit Refer to Figure 3）
CISPR22/EN55022 CLASS A（External Circuit Refer to Figure 1）
EMI
RE
CISPR22/EN55022 CLASS B（External Circuit Refer to Figure 3）
IEC/EN61000-4-2 Contact ±4KV perf. Criteria B
ESD
RS
IEC/EN61000-4-3 10V/m
IEC/EN61000-4-4 ±2KV
IEC/EN61000-4-4 ±4KV
IEC/EN61000-4-5 ±2KV/±4KV
IEC/EN61000-4-6 3 Vr.m.s
IEC/EN61000-4-8 10A/m
perf. Criteria A（External Circuit Refer to Figure 3）
EMC
perf. Criteria B（External Circuit Refer to Figure 1）
perf. Criteria B（External Circuit Refer to Figure 3）
perf. Criteria B（External Circuit Refer to Figure 3）
perf. Criteria A（External Circuit Refer to Figure 3）
perf. Criteria A
EFT
EMS
Surge
CS
PFM
Voltage dips、short and
interruptions immunity
IEC/EN61000-4-11 0%-70%
perf. Criteria B
UL94V-0
Case material
Install
PCB
>300,000h @25℃
MTBF
Note:
1.
2.
3.
4.
External electrolytic capacitor are required to models when AC input, more details refer to typical applications.
Ripple and Noise were measured by the method of anear measure (more details refer to the anear measure).
All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified.
In this datasheet, all the test methods of indications are based on corporate standards.
ANEAR MEASURE
Connect Oscillograph Probe
Copper sheet
FUSE
L
Load
N
Note: C1: 1µF (Ceramic capacitor) C2: 10µF (Electrolytic capacitor)
PRODUCT TYPICAL CURVE
Temperature VS Load
Input Voltage VS Load
Load(%)
100
Load(%)
100
80
60
40
80
60
40
-40 -20
Temperature(
55 85
Vdc
Vac
70 100
85 110
340 400
240 264
℃
)
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
LS01 series A/0-2012 Page 2 of 4
LS01 DC input rated load efficiency cure
80
LS01 DC input efficiency cure
80
75
70
65
60
55
50
45
40
35
30
25
75
70
65
60
55
LS01-15B05S
LS01-15B09S
LS01-15B12S
LS01-15B15S
LS01-15B24S
100VDC
200VDC
300VDC
400VDC
.
100 150 200 250 300 350 400
Input Voltage(VDC)
10 20 30 40 50 60 70 80 90 100
Load(%)
LS01 AC input rated load efficiency cure
LS01 AC input efficiency cure
80
80
75
70
65
60
55
50
45
40
35
30
25
85VAC
LS01-15B05S
LS01-15B09S
LS01-15B12S
LS01-15B15S
LS01-15B24S
75
70
65
60
55
110VAC
230VAC
264VAC
85
110
120
220
230
240
264
10 20 30 40 50 60 70 80 90 100
Load (%)
Input Voltage(VAC)
STRUCTURE FIGURE
3
12
+Vin(L)
-Vin(N)
+Vo
Rectifier
filter
circuit
DC/DC
Convertor
Rectificate
1
7
10
-Vo
GND
External
Capacitor
C1
+
+CAP
5
TYPICAL APPLICATIONS
L
L
+Vo
AC-DC
-Vo
+Vo
-Vo
FUSE
NTC
+Vo
12
C2 C3 TVS RL
+
L
3
5
C1
+
MOV
AC-DC
N
N
7
1
10
-Vo
N
PE
Figure 1：LS01-15BXXS
Figure 2：Note: This application is not supported for this series.
can use MORNSUN’s FC-L01D
FUSE
R2
L
L
CY1
CY2
CY3
R3
MOV
R1
CX
C1
+
OUTPUT
AC-DC
5
7
CY4
N
N
LCM
PE
Figure 3：LS01 series Recommended circuit for application require higher EMC standard
(external circuit output same as above)
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
LS01 series
A/0-2012
Page 3 of 4
Figure 4：EMC application circuit PCB layout
Safety and recommend wiring: linewidth A≥3mm
EXTERNAL CAPACITORS TYPICAL VALUE
Output Voltage
C1
C2
C3
FUSE
TVS
5V
9V
470µF/35V
SMBJ7.0A
SMBJ12A
1µF/50V
(Ceramic capacitor)
12V
15V
24V
10µF-22µF /400V
150µF/35V
100µF/35V
1A/250V
SMBJ20A
SMBJ30A
Note:
1.
C1:AC input, is filtering electrolytic capacitor (which is required), when input voltage is below 100VAC, and the value of C1 is 10µF-22μF/400V.
DC input, is a filtering capacitor in EMC Filter, the value of C1 is 10µF/400V(when input voltage is above 370VDC, and the value of C1 is 10µF/450V), If
EMC performance is not required,C1 could not need.
2.
3.
Output filtering capacitor C2 (which is required when AC input or DC input) is recommended to use high frequency and low impedance electrolytic capacitors.
For capacitance and current of capacitor please refer to manufacture’s datasheet. Voltage derating of capacitor should be 80% or above. C3 is ceramic
capacitor, it is used to filter high frequency noise. TVS is a recommended component to protect post-circuits (if converter fails). External input NTC is
recommended to use 5D-9.
For standard EMC requirement, please refer to figure 1 , if higher EMC requirement ,please refer to figure 3.
MOV: Varistor, model: 561KD14，it is used to protect the device under surge;
R1 、R2：2Ω/3W Winding resistor；
R3：1MΩ/2W ；
CY1、CY2、CY3、CY4：1nF/400VAC；
CX：0.22µF /275VAC；
LCM：10mH-30mH；
FC-L01D：Mornsun’s 2KV/4KV Surge protector.
FUSE: 1A/250V
4.
OUTLINE DIMENSIONS & FOOTPRINT DETAILS
MECHANICAL DIMENSIONS & RECOMMENDED FOOTPRINT
PACKAGING DIAGRAM
SIP Package
(Front View)
1
3
5
7
10 12
1
3
5
7
10 12
Φ1.30
[0.051]
0.84[0.033]
2.54[0.100]
5.08[0.200]
Note: grid 2.54*2.54mm.
7.62[0.300]
(Bottom View)
FOOTPRINT DETAILS
Function
-Vin(N)
+Vin(L)
+CAP
GND
Pin
1
Inner box dimensions: L*W*H=355*192*93mm
Packaging quantity: 100pcs
Outer box dimensions: L*W*H=405*380*305mm
Packaging quantity: 600pcs
Max35.00[1.378]
3
5
7
Note:
10
12
-Vo
Unit: mm[inch]
Pin section tolerances: ±0.10mm[±0.004inch]
General tolerances: ±0.50mm[ ± 0.020inch]
+Vo
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China.
Tel: 86-20-28203030
Fax:86-20-38601272
Http://www.mornsun-power.com
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
LS01 series A/0-2012 Page 4 of 4
相关型号：
LS01-15B15S
LS01 Series ----- are high efficiency green power modules with miniature packaging provided by Mornsun.
MORNSUN
LS01-15B24S
LS01 Series ----- are high efficiency green power modules with miniature packaging provided by Mornsun.
MORNSUN
©2020 ICPDF网 联系我们和版权申明