首页 |元器件品牌

F2415N-1W [MORNSUN]

SINGLE OUTPUT DC-DC CONVERTER; 单路输出DC -DC转换器
F2415N-1W
型号： F2415N-1W
厂家： MORNSUN SCIENCE& TECHNOLOGY LTD.    MORNSUN SCIENCE& TECHNOLOGY LTD.
描述：

SINGLE OUTPUT DC-DC CONVERTER
单路输出DC -DC转换器

转换器 输出元件 DC-DC转换器
文件： 总2页 (文件大小：203K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
F_M-1W & F_N-1W Series  
1W, FIXED INPUT, ISOLATED & UNREGULATED  
SINGLE OUTPUT DC-DC CONVERTER  
Multi-country patent protection RoHS  
FEATURES  
PRODUCT PROGRAM  
High Efficiency up to 79%  
Input  
output  
Part  
Number  
Efficiency Packge  
3000VDC Isolation  
Temperature Range: -40°C to+85°C  
No Heatsink Required  
No External Component Required  
Internal SMD construction  
Industry Standard Pinout  
RoHS Compliance  
Voltage (VDC)  
Current (mA)  
Voltage  
(VDC)  
(%, Typ)  
style  
Nominal  
Range  
3.0-3.6  
Min  
300  
200  
300  
200  
111  
83  
Max  
30  
20  
30  
20  
12  
9
F0303M -1W  
F0305M/N -1W  
F0503M/N -1W  
F0505M/N -1W  
F0509M/N -1W  
F0512M/N -1W  
F0515M/N -1W  
F1203M/N -1W *  
F1205M/N -1W  
F1209M/N -1W  
F1212M/N -1W  
F1215M/N -1W  
F2405N -1W  
3.3  
5
70  
73  
71  
69  
76  
78  
78  
74  
71  
74  
78  
79  
72  
77  
77  
79  
78  
SIP  
3.3  
SIP/DIP  
SIP/DIP  
SIP/DIP  
SIP/DIP  
SIP/DIP  
SIP/DIP  
SIP/DIP  
SIP/DIP  
SIP/DIP  
SIP/DIP  
SIP/DIP  
DIP  
3.3  
5
5
4.5-5.5  
10.8-13.2  
21.6-26.4  
9
12  
15  
3.3  
5
67  
7
APPLICATIONS  
300  
200  
111  
83  
30  
20  
12  
9
The F_M-1W & F_N-1W Series is specially  
designed for applications where a group of polar  
power supplies are isolated from the input  
power supply in a distributed power supply  
system on a circuit board.  
12  
24  
9
12  
15  
5
67  
7
These products apply to:  
200  
111  
83  
20  
12  
9
1) Where the voltage of the input power supply  
is fixed (voltage variation ≤ ±10%);  
F2409N -1W  
9
DIP  
F2412N -1W *  
F2415N -1W  
12  
15  
24  
DIP  
2) Where isolation is necessary between input  
and output (isolation voltage ≤3000VDC);  
3) Where the regulation of the output voltage  
and the output ripple noise are not  
demanding.  
67  
7
DIP  
F2424N -1W  
42  
3
DIP  
* Designing.  
Such as: purely digital circuits, ordinary low  
frequency analog circuits, and IGBT power  
device driving circuits.  
ISOLATION SPECIFICATIONS  
Item  
Test conditions  
Min  
Typ  
Max  
Units  
VDC  
MΩ  
Isolation voltage  
Isolation resistance  
Isolation Capacitance  
Tested for 1 minute and 1 mA max 3000  
Test at 500VDC  
1000  
60  
pF  
MODEL SELECTION  
F0505N-1W  
COMMON SPECIFICATIONS  
Rated Po wer  
Item  
Test conditions  
Min  
Typ  
Max  
95  
Units  
%
Pack age Styl e  
Output Voltage  
Inpu t Voltage  
Product Series  
Storage humidity  
Operating Temperature  
Storage Temperature  
Temp. rise at full load  
Lead temperature  
Short circuit protection*  
Cooling  
-40  
-55  
85  
125  
30  
°C  
15  
1.5mm from case for 10 seconds  
300  
1
S
MORNSUN Science & Technology co.,Ltd.  
Address: 2th floor 6th building, Hangzhou  
Industrial District, Guangzhou, China  
Tel: 86-20-38601850  
Fax: 86-20-38601272  
http://www.mornsun-power.com  
Free air convection  
Plastic (UL94-V0)  
Case material  
MTBF  
3500  
4.3  
K hours  
Weight  
g
*Supply voltage must be discontinued at the end of short circuit duration.  
MORNSUN reserves the copyright  
Specifications subject to change without notice.  
F_M-1W & F_N-1W  
A/1-2008  
Page 1 of 2  
OUTPUT SPECIFICATIONS  
APPLICATION NOTE  
Item  
Test conditions  
Min  
0.1  
Typ  
Max  
1
Units  
W
Requirement on output load  
To ensure this module can operate efficiently  
and reliably, During operation, the minimum output  
load is not less than 10% of the full load, and that  
this product should never be operated under  
no load! If the actual output power is very small,  
please connect a resistor with proper resistance at  
the output end in parallel to increase the load, or  
use our company’s products with a lower rated  
output power.  
Output power  
(3.3V output)  
(others output)  
(3.3V output)  
(5V output)  
±1.5  
±1.2  
20  
For Vin change  
of ±1%  
Line regulation  
15  
10  
15  
%
(9V output)  
8.3  
6.8  
6.3  
6.0  
15  
10% to 100%  
load  
Load regulation  
(12V output)  
(15V output)  
(24V output)  
15  
15  
Recommended circuit  
15  
If you want to further decrease the input/output  
ripple, an “LC” filtering network may be connected  
to the input and output ends of the DC/DC  
converter, see (Figure 1).  
Output voltage accuracy  
Temperature drift  
See tolerance envelope graph  
0.03 %/°C  
100% full load  
Ripple& Noise*  
20MHz Bandwidth  
100  
100  
150 mVp-p  
KHz  
L
Switching frequency  
Full load, nominal input  
L
+Vo  
Vin  
*Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing  
of Power Converter section, application notes.  
Note:  
1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated  
output load unless otherwise specified.  
Cout  
Cin  
DC  
DC  
GND  
0V  
(Figure 1)  
2. See below recommended circuits for more details.  
It should also be noted that the inductance and  
the frequency of the “LC” filtering network should  
be staggered with the DC/DC frequency to avoid  
mutual interference. However, the capacitance of  
the output filter capacitor must be proper. If the  
capacitance is too big, a startup problem might  
arise. For every channel of output, provided the  
safe and reliable operation is ensured, the  
recommended capacitance of its filter capacitor  
TYPICAL CHARACTERISTICS  
sees (Table 1).  
EXTERNAL CAPACITOR TABLE (Table 1)  
Single Vout  
(VC)  
Vin  
(VDC)  
Cin  
(uF)  
Cout  
(uF)  
Operating Temp.(oC)  
3.3/5  
12  
24  
-
4.7  
2.2  
1
3.3/5  
9
10  
4.7  
2.2  
1
OUTLINE DIMENSIONS & PIN CONNECTIONS  
12  
First Angle Projection  
-
15/24  
FXXXXM-1W  
FXXXXN-1W  
It’s not recommended to connect any external  
capacitor in the application field with less than 0.5 watt  
output.  
Side view  
Output Voltage Regulation and Over-voltage  
Protection Circuit  
0.50  
(0.020)  
The simplest device for output voltage regulation,  
over-voltage and over-current protection is a linear  
voltage regulator with overheat protection that is  
connected to the input or output end in series  
1
4
5
Bottom view  
10.00(0.394)  
1
3 4  
2
6.00(0.236)  
7
(Figure 2).  
+Vout  
Vin  
REG  
RECOMMENDED FOOTPRINT  
Top view,grid:2.54mm(0.1inch),  
diameter:1.00mm(0.039inch)  
DC DC  
GND  
0V  
+Vout  
REG  
Vin  
DC  
(Figure 2)  
Overload Protection  
DC  
GND  
1
2
4
3
7
5
0V  
1
4
FOOTPRINT DETAILS  
Function  
Pin  
1
Under normal operating conditions, the output  
circuit of these products has no protection against  
overload. The simplest method is to connect a  
self-recovery fuse in series at the input end or add  
a circuit breaker to the circuit.  
GND  
Vin  
2
Function  
Pin  
3
0V  
GND  
Vin  
+Vo  
1
4
5
7
4
+Vo  
Note:  
Unit:mm(inch)  
Pin section:0.50*0.30mm(0.020*0.012inch)  
Pin section tolerances: 0.10mm( 0.004inch)  
General tolerances: 0.25mm( 0.010inch)  
0V  
No parallel connection or plug and play.  
MORNSUN reserves the copyright  
Specifications subject to change without notice.  
F_M-1W & F_N-1W  
A/1-2008  
Page 2 of 2  

相关型号：

F2415S-1W

 DUAL/SINGLE OUTPUT DC-DC CONVERTER
MORNSUN

F2415S-1WR

 Analog Circuit
MORNSUN

F2415S-2W

 DUAL/SINGLE OUTPUT DC-DC CONVERTER
MORNSUN

F2415T-1W

 1W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER
CRYSTEKMICROW

F2415XDR

 FIXED INPUT,ISOLATED®ULATED Single Output DC/DC Converter
MICRODC

F2415XES-2W

 Isolated 2W Single Output DC/DC Converters
MICRODC

F2415XMD-1W

 3KV ISOLATED 1 W UNREGULATED SINGLE OUTPUT DIP8 DC/DC Converter
MICRODC

F2415XSR

 FIXED INPUT,ISOLATED®ULATED Single Output DC/DC Converter
MICRODC

F2418XES-2W

 Isolated 2W Single Output DC/DC Converters
MICRODC

F2418XMD-1W

 3KV ISOLATED 1 W UNREGULATED SINGLE OUTPUT DIP8 DC/DC Converter
MICRODC

F2424D-2W

 Analog Circuit, PDIP6
MORNSUN

F2424N-1W

 SINGLE OUTPUT DC-DC CONVERTER
MORNSUN
©2020 ICPDF网 联系我们和版权申明