FL50S7-K120 [MOLEX]
D Subminiature Connector, 50 Contact(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT;型号: | FL50S7-K120 |
厂家: | Molex |
描述: | D Subminiature Connector, 50 Contact(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT 连接器 |
文件: | 总9页 (文件大小:989K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
D-Sub Crimp Connectors
D-Sub Crimp Steckverbinder
Ordering Code
Bestellschlüssel
UL Recognized File No. 168813
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
42
DS 10/2007
Technical Data
Technische Daten
Mechanical Data
Mechanische Daten
Mechanical Data
Mechanische Daten
Mating force per signal contact
Steckkraft pro Signalkontakt
Unmating force per signal contact
Ziehkraft pro Signalkontakt
dꢀ3,4 N
tꢀ0,2 N
Maximum sized suitable cable outer diameter
Maximal verwendbarer Kabelaußendurchmesser
2,2 mm (0.087“)
Electrical Data
Elektrische Daten
Electrical Data
Elektrische Daten
Current rating
Maximale Stromstärke
5 A
Test voltage between 2 contacts / shell and contact
1200 V / 1 min.
Prüfspannung zwischen 2 Kontakten bzw. Kontakt und Gehäuse
Meets transitional resistance requirements per contact pair in accordance with:
Erfüllt Übergangswiderstand pro Kontaktpaar nach:
- MIL-C-2430 / MIL-C-24308
d 7,3 m:ꢀ
d 10 m:ꢀ
- DIN 41652 / DIN 41652
Insulation resistance between contacts
Isolationswiderstand Kontakt / Kontakt
Volume resistivity (ASTM-D 257)
Spezifischer Durchgangswiderstand (ASTM-D 257)
Dielectric strength
tꢀ5000 M:
1016 : cm
50 kV / mm
Spezifische Durchschlagsfestigkeit
Materials and Platings
Materialien und Oberflächen
Materials and Platings
Materialien und Oberflächen
FL
Series / Baureihe
Insulator
Isolierkörper
FU
black thermoplastic, glass filled, (UL94V-0)
schwarz, Thermoplast, glasfaserverstärkt,
(UL94V-0)
green, thermoplastic, glass filled (UL94V-0)
grün, Thermoplast, glasfaserverstärkt,
(UL94V-0)
Relative temperature index according
to UL 746 B
115 °C (239 °F)
130 °C (266 °F)
Rel. Temperaturindex nach UL 746 B
Heat deflection temperature limit according to
DIN 53461 HDT/A
Formbeständigkeitstemperatur nach DIN
53461 HDT/A
185 °C (365 °F)
197 °C (386,6 °F)
Sub temperature limit
Untere Grenztemperatur
Shell
-55 °C (-67 °F)
Steel
Stahl
Gehäuse
yellow chromate over zinc plating, pin connector shell without dimples
Not RoHS compliant!
Shell plating (standard)
Gehäuseoberfläche (Standard)
verzinkt und gelb chromatiert, Stiftsteckverbindergehäuse ohne Kontaktnoppen
Nicht RoHS konform!
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
43
DS 10/2007
Shell Dimensions
Gehäuseabmessungen
Pin Connector Shell
Stiftsteckverbindergehäuse
Shell Size
A
B
C
D
E
F
G
Gehäusegröße
±0,4
+0,2
±0,15
+0,2
±0,4
±0,3
±0,3
(±0.016) (+0.008) (± 0.006) (+0.008) (±0.016) (±0.012) (±0.012)
30,8
(1.213) (0.665) (0.984) (0.323) (0.492)
39,1 25,2 33,3 8,2 12,5
(1.539) (0.992) (1.311) (0.323) (0.492)
53,0 38,9 47,04 8,2 12,5
(2.087) (1.531) (1.852) (0.323) (0.492)
69,3 55,3 63,5 8,2 12,5
(2.728) (2.177) (2.500) (0.323) (0.492)
66,9 52,8 61,1 11,0 15,4
(2.634) (2.079) (2.406) (0.433) (0.606)
16,9
25,0
8,2
12,5
10,8
(0.425)
10,8
(0.425)
10,8
(0.425)
10,8
(0.425)
13,7
19,3
(0.760)
27,5
(1.083)
41,3
(1.626)
57,7
(2.272)
55,3
1
2
3
4
5
(0.539)
(2.177)
Socket Connector Shell
Buchsensteckverbindergehäuse
Shell Size
A
B
C
D
E
F
G
Gehäusegröße
±0,4
-0,2
±0,15
-0,2
±0,4
±0,3
±0,3
(±0.016) (-0.008) (±0.006) (-0.008) (±0.016) (±0.012) (±0.012)
30,8
(1.213)
39,1
(1.539)
53,0
(2.087)
69,3
(2.728)
66,9
16,4
(0.646)
24,7
(0.972)
38,5
(1.516)
54,9
(2.161)
52,5
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
63,5
(2.500)
61,1
(2.406)
8,0
(0.315)
8,0
(0.315)
8,0
(0.315)
8,0
(0.315)
10,8
12,5
(0.492)
12,5
(0.492)
12,5
(0.492)
12,5
(0.492)
15,4
10,8
(0.425)
10,8
(0.425)
10,8
(0.425)
10,8
(0.425)
13,7
19,3
(0.760)
27,5
(1.083)
41,3
(1.626)
57,7
(2.272)
55,3
1
2
3
4
5
(2.634)
(2.067)
(0.425)
(0.606)
(0.539)
(2.177)
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
44
DS 10/2007
Machined Contacts for Crimp Connectors
Gedrehte Kontakte für Crimpsteckverbinder
Pin
Socket
Stift
Buchse
Wire Size (AWG)
Drahtgröße (AWG)
18-22
Order Number
Bestellnummer
FK20S18-02V...
FK20PL18-02V...
FK20SL18-02V...
FK20P-13V...
MIL-No.
MIL-Nummer
Au (Over Ni)
Au über Ni
Type
Typ
Socket / Buchse
Pin / Stift
Socket / Buchse
Pin / Stift
Socket / Buchse
Pin / Stift
Socket / Buchse
Pin / Stift
Socket / Buchse
Pin / Stift
Socket / Buchse
Pin / Stift
0,2 µm (8 microinches)
0,2 µm (8 microinches)
0,2 µm (8 microinches)
1,3 µm (51 microinches)
1,3 µm (51 microinches)
0,2 µm (8 microinches)
0,2 µm (8 microinches)
0,8 µm (31 microinches)
0,8 µm (31 microinches)
1,3 µm (51 microinches)
1,3 µm (51 microinches)
0,2 µm (8 microinches)
0,2 µm (8 microinches)
18-22
18-22
20-24
20-24
20-24
20-24
20-24
20-24
26-28
26-28
26-28
26-28
M24308/11-1, M39029/64-369
M24308/10-1, M39029/63-368
FK20S-13V...
FK20PL-02V...
FK20SL-02V...
FK20PL-08V...
FK20SL-08V...
FK20P26-13V...
FK20S26-13V...
FK20PL26-02V...
FK20SL26-02V...
Socket / Buchse
Packing Unit
Ordering Example
Verpackungseinheit
Bestellbeispiel
FK20SL-08V_0100
Packing Unit (Pieces)
Addition to Order Number
Verpackungseinheit (Stück)
Bestellnummernergänzung
100
1000
5000
_0100
_1000
_5000
FK20SL-08V
_0100
Crimp socket contact for wire size 20 - 24,
plating 0.8 µm (31 microinches) Au over Ni.
Crimpbuchsenkontakt für Drahtgröße AWG 20 - 24,
Oberfläche 0,8 µm Au über Ni.
100 pieces are packed in one bag.
100 Stück in einem Beutel verpackt.
Crimping Tools
Crimpwerkzeuge
Contact Type
Tool
Kontakttyp
Werkzeug
For use with contact types:
FK20S18, FK20P, FK20S, FK20P26, FK20S26
Für Kontakttypen:
Hand crimp tool M22520/2-01 and positioner M22520/2-08
See page 49
Siehe Seite 49
Handcrimpzange M22520/2-01 und Einsatz M22520/2-08
FK20S18, FK20P, FK20S, FK20P26, FK20S26
For use with contact types:
FK20PL18, FK20SL18, FK20PL, FK20SL, FK20PL26, FK20SL26
Für Kontakttypen:
Hand crimp tool M22520/2-01 and positioner K761 or
hand crimp tool including positioner 2761
Handcrimpzange M22520/2-01 und Einsatz K761 oder
Handcrimpzange inklusive Einsatz 2761
FK20PL18, FK20SL18, FK20PL, FK20SL, FK20PL26, FK20SL26
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
45
DS 10/2007
Stamped Contacts for Crimp Connectors
Gestanzte Kontakte für Crimpsteckverbinder
Pin
Socket
Stift
Buchse
Wire Size (AWG)
Drahtgröße
Order Number
Bestellnummer
Au (over Ni)
Au über Ni
0,1 µm
(4 microinches)
0,1 µm
(4 microinches)
0,1 µm
(4 microinches)
0,1 µm
(4 microinches)
0,8 µm
(31 microinches)
0,8 µm
(31 microinches)
0,8 µm
(31 microinches)
0,8 µm
Type
Typ
Crimping Tools
Crimpwerkzeuge
Packing Unit
Verpackungseinheit
10 strips of 25 pieces in a box
10 Streifen á 25 Stück in einer Schachtel
10 strips of 25 pieces in a box
10 Streifen á 25 Stück in einer Schachtel
10,000 pieces on a reel
20-24
20-24
20-24
20-24
20-24
20-24
20-24
20-24
20-24
20-24
P7L
S7L
Pin / Stift
Socket / Buchse
Pin / Stift
F1089
F1089
P7LR
auf Rolle zu 10.000 Stück
10,000 pieces on a reel
S7LR
Socket / Buchse
Pin / Stift
auf Rolle zu 10.000 Stück
10 strips of 25 pieces in a box
10 Streifen á 25 Stück in einer Schachtel
10 strips of 25 pieces in a box
10 Streifen á 25 Stück in einer Schachtel
10,000 pieces on a reel
P7L-K176
S7L-K176
P7LR-K176
S7LR-K176
P7LSR-K176
S7LSR-K176
F1089
F1089
Socket / Buchse
Pin / Stift
auf Rolle zu 10.000 Stück
10,000 pieces on a reel
auf Rolle zu 10.000 Stück
350 pieces on a reel
auf Rolle zu 350 Stück
350 pieces on a reel
Socket / Buchse
Pin / Stift
(31 microinches)
0,8 µm
(31 microinches)
0,8 µm
F1128
F1128
Socket / Buchse
(31 microinches)
auf Rolle zu 350 Stück
0,1 µm
(4 microinches)
0,1 µm
(4 microinches)
0,1 µm
(4 microinches)
0,1 µm
(4 microinches)
0,8 µm
(31 microinches)
0,8 µm
(31 microinches)
0,8 µm
(31 microinches)
0,8 µm
(31 microinches)
0,8 µm
10 strips of 25 pieces in a box
10 Streifen á 25 Stück in einer Schachtel
10 strips of 25 pieces in a box
10 Streifen á 25 Stück in einer Schachtel
10,000 pieces on a reel
24-28
24-28
24-28
24-28
24-28
24-28
24-28
24-28
24-28
24-28
P7L26
S7L26
Pin / Stift
Socket / Buchse
Pin / Stift
F1089
F1089
P7LR26
auf Rolle zu 10.000 Stück
10,000 pieces on a reel
auf Rolle zu 10.000 Stück
S7LR26
Socket / Buchse
Pin / Stift
10 strips of 25 pieces in a box
10 Streifen á 25 Stück in einer Schachtel
10 strips of 25 pieces in a box
10 Streifen á 25 Stück in einer Schachtel
10,000 pieces on a reel
P7L26-K176
S7L26-K176
P7LR26-K176
S7LR26-K176
P7LSR26-K176
S7LSR26-K176
F1089
F1089
Socket / Buchse
Pin / Stift
auf Rolle zu 10.000 Stück
10,000 pieces on a reel
auf Rolle zu 10.000 Stück
350 pieces on a reel
auf Rolle zu 350 Stück
350 pieces on a reel
auf Rolle zu 350 Stück
Socket / Buchse
Pin / Stift
F1128
F1128
(31 microinches)
0,8 µm
(31 microinches)
Socket / Buchse
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
46
DS 10/2007
Stamped Contacts, Feed Direction and Machine Setup
Gestanzte Kontakte, Zuführungsrichtung und Lage
Version I: Entry from Right Side with Turn Round (Standard)
Variante I: Zuführung von der rechten Seite mit Umlenkung (Standard)
Ordering Example for Crimp Contacts on a Reel
Bestellbeispiel für Bandcrimpkontakte
Stamped contacts, entry from right side with turn round, wire size (AWG)
20-24, 0.1 µm (4 microinches) Au over Ni, type pin, 10,000 pieces on a reel.
Gestanzte Kontakte, Zuführung von der rechten Seite mit Umlenkung, Draht-
größe 20-24, 0,1 µm Au über Ni, Typ Stift, auf Rolle zu 10.000 Stück.
Pin:
P7LR
Stift:
Version II: Entry from Left Side with Turn Round
Variante II: Zuführung von der linken Seite mit Umlenkung
Addition to order number for version II
Bestellnummernergänzung für Variante II
-V2
Ordering Example for Crimp Contacts on a Reel
Bestellbeispiel für Bandcrimpkontakte
Stamped contacts, entry from left side with turn round, wire size (AWG)
20-24, 0,1 µm (4 microinches) Au over Ni, type pin, 10,000 pieces on a reel.
Gestanzte Kontakte, Zuführung von der linken Seite mit Umlenkung, Draht-
größe 20-24, 0,1 µm Au über Ni, Typ Stift, auf Rolle zu 10.000 Stück.
Pin:
P7LR-V2
Stift:
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
47
DS 10/2007
Stamped Contacts, Feed Direction and Machine Setup
Gestanzte Kontakte, Zuführungsrichtung und Lage
Version III: Entry from Left Side
Variante III: Direkte Zuführung von der linken Seite
Addition to order number for version III
Bestellnummernergänzung für Variante III
-V3
Ordering Example for Crimp Contacts on a Reel
Bestellbeispiel für Bandcrimpkontakte
Stamped contacts, entry from left side, wire size (AWG) 20-24, 0.1 µm
(4 microinches) Au over Ni, type pin, 10,000 pieces on a reel.
Gestanzte Kontakte, direkte Zuführung von der linken Seite, Drahtgröße
20-24, 0,1 µm Au über Ni, Typ Stift, auf Rolle zu 10.000 Stück.
Pin:
P7LR-V3
Stift:
Version IV: Entry from Right Side
Variante IV: Direkte Zuführung von der rechten Seite
Addition to order number for version IV
Bestellnummernergänzung für Variante IV
-V4
Ordering Example for Crimp Contacts on a Reel
Bestellbeispiel für Bandcrimpkontakte
Stamped contacts, entry from right side, wire size (AWG) 20-24, 0.1 µm
(4 microinches) Au over Ni, type pin, 10.000 pieces on a reel.
Gestanzte Kontakte, direkte Zuführung von der rechten Seite, Drahtgröße
20-24, 0,1 µm Au über Ni, Typ Stift, auf Rolle zu 10.000 Stück.
Pin:
P7LR-V4
Stift:
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
48
DS 10/2007
Tools
Werkzeuge
Hand Crimp Tool M22520/2-01 for Machined Contacts
Hand Crimp Tool 2761 with Crimp Die for Machined Contacts
Handcrimpzange M22520/2-01 für gedrehte Kontakte
Handcrimpzange 2761 mit Crimpeinsatz für gedrehte Kontakte
Die / Einsatz
Order Number
Order Number
Bestellnummer
Bestellnummer
Wire size: AWG 20 to AWG 26
Hand crimp tool
M22520/2-01
Drahtgröße: AWG 20 bis AWG 26
Suitable for contact types: see page 45
Verwendbar für Kontakttypen: siehe Seite 45
Handcrimpzange
Hand crimp tool with crimp die
Handcrimpzange mit Crimpeinsatz
2761
Positioner
Einsatz
Wire size: AWG 18 to AWG 28
Drahtgröße: AWG 18 bis AWG 28
M22520/2-08
K761
Positioner
Einsatz
Hand Crimp Tool F1128 for Stamped D-Sub Contacts on a Reel
Hand Crimp Tool F1089 for Stamped Contacts
Handcrimpzange F1128 für gestanzte D-Sub Kontakte auf Rollen Handcrimpzange F1089 für gestanzte Kontakte
Order Number
Bestellnummer
Wire size: AWG 20 to AWG 28
Order Number
Bestellnummer
Wire size: AWG 20 to AWG 28
Drahtgröße: AWG 20 bis AWG 28
Hand crimp tool
Handcrimpzange
Drahtgröße: AWG 20 bis AWG 28
For reels of up to 300 pieces
Für Rollen á 300 Stück
Hand crimp tool
Handcrimpzange
F1089
F1128
Plastic Insertion / Removal Tool
Metal Insertion / Removal Tools
Ein- und Ausbauwerkzeug aus Kunststoff
Ein- und Ausbauwerkzeuge aus Metall
Order Number
Bestellnummer
Order Number
Bestellnummer
Insertion / Removal tool
Ein- und Ausbauwerkzeug
Insertion tool
Einbauwerkzeug
Removal tool
M81969/1-02
DAK273
DRK273
Ausbauwerkzeug
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
49
DS 10/2007
FU Series (Crimp Connectors According to MIL-C-24308)
FU Serie (Crimpsteckverbinder nach MIL-C-24308)
FU connectors are fitted with an insulator for a higher contact retention strength (≥50N) and improved heat resistance (up to 130 ºC (266 ºF) as required
by UL). They fully meet the requirements of MIL C-24308, but are supplied with a plastic spring contact retention system for signal contacts.
Discrepancies in diameter to MIL: Insulator depth 10.8 mm (4.25“) (MIL-specification 9.5 mm (3,75“) max.).
FU-Steckverbinder sind mit einem Isolierkörper für höhere Kontakthaltekraft (≥ 50N) und bessere Temperaturbeständigkeit (bis 130 ºC entsprechend
UL 746 B) ausgeführt. Sie erfüllen die Anforderungen gemäß der MIL C-24308, besitzen jedoch ein Plastikfeder-Kontakthaltesystem für Signalkontakte.
Maßabweichung von der MIL: Isolierkörpertiefe 10,8 mm (MIL-Angabe 9,5 mm max.).
Shell Size
Gehäusegröße
Number of Contacts
Pin Connector
Stiftsteckverbinder
FU09P7
Socket Connector
Buchsensteckverbinder
FU09S7
Polzahl
1
2
3
4
5
9
15
25
37
50
FU15P7
FU25P7
FU37P7
FU50P7
FU15S7
FU25S7
FU37S7
FU50S7
Illustration: FU 25P7 connector and contacts
Abbildung: FU 25P7 Steckverbinder und Kontakte
Modification No.
Modifikationsnummer
Contacts
Technical Specification
Technische Spezifikation
Shell Plating
Kontakte
Gehäuseoberfläche
Tin plated over nickel, pin connector
shell with dimples
...0970
...1475
without contacts
verzinnt über Nickel,
Stiftsteckverbindergehäuse mit
Kontaktnoppen
Zinc plating, not RoHS compliant
verzinkt, nicht RoHS konform
ohne Kontakte
Contact Technical Data
Technische Daten der Kontakte
Contact Technical Data
Technische Daten der Kontakte
AWG 20 to AWG 24
Wire size
Drahtgröße
Plating
AWG 20 bis AWG 24
1.3 µm (51 microinches) Au over Ni
Oberfläche
Crimping tools
Crimpwerkzeuge
Contacts
1,3 µm Au über Ni
Hand crimp tool M22520/2-01 with positioner M22520/2-08 or hand crimp tool 2761
Handcrimpzange M22520/2-01 mit Einsatz M22520/2-08 oder Handcrimpzange 2761
With machined contacts as standard FK20P... or FK20S... (supplied separately, not mounted)
Serienmäßig mit gedrehten Kontakten FK20P... bzw. FK20S... (als Beipack, nicht montiert)
Kontakte
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
50
DS 10/2007
相关型号:
FL50S7-K121
D Subminiature Connector, 50 Contact(s), Female, Crimp Terminal, Socket, ROHS COMPLIANT
MOLEX
©2020 ICPDF网 联系我们和版权申明