19006-0011 [MOLEXKITS]

Insulated Ring, Spade, Butt Splice, Closed-End Solderless Terminal; 绝缘环，铲，对接接头，闭端端子焊


型号：	19006-0011
厂家：	MOLEXKITS
描述：	Insulated Ring, Spade, Butt Splice, Closed-End Solderless Terminal 绝缘环，铲，对接接头，闭端端子焊端子和端子排
文件：	总3页 (文件大小：35K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

1801 Morgan Street

Rockford, Illinois 61102

800-435-2931

www.molexkits.com

Datasheet for 76650-0053

General Information

Part Number:

76650-0053

Manufacturer:

Title:

Molex / Waldom

Deluxe Solderless Term Kit

Insulated Ring, Spade, Butt Splice, Closed-End Solderless Terminal .187" and .250 "

Fully Insulated Female Quick Disconnect with Universal Crimp tool

Description:

Product Family:

Certificates:

Terminals

(Molex Parts within this kit) - EU RoHS Compliant

Country of Origin: Kit assembled in U.S.A.

Specifications

Design

Configuration:

Connector Type:

Tab Sizes:

(Wire-to-Wire) and (Wire-to-Board) / Solderless Terminals

Solderless Terminals

.187" and .250"

Stud Sizes:

5-6 (M3-3.5)

Insulation:

Nylon and PVC

Wire size:

(22-18), (16-14) and (12-10) AWG

Product Highlights

Quick disconnects allow for quickly connecting or disconnecting a terminal. The front

end of the terminal has a female-type receptacle which allows the terminal to slide

onto and off of a male blade. Flags are a type of product that are used when there is

a space constraint, and a regular straight Quick Disconnect is too large.

Piggyback Quick Disconnects can be used when multiple connections (also called

piggyback) are required and there are a limited number of male tabs. The piggyback

actually allows another QD to be connected to its tab and then the piggyback is

connected to a tab.

Spades have the open tongue end used for rapid insertion on the mounting screw.

The spade is usually used on free standing studs.

The Snap plug is a round bullet-like terminal that plugs or "snaps" into the female

receptacle. Snaps are used in a variety of applications where a "quick disconnect"

connection is needed, but there is not enough space for a normal QD coupler. Like a

coupler set, the male and female pieces can be connected and disconnected many

times.

Closed-end connectors are used in a variety of situations to "pigtail" or tie together

2 or more wires.

Butt Splices allow two stripped wires to be inserted into each end and "butt" in the

center, with the crimp securing both wires together.

The Step Down Butt Splice is the perfect solution when 2 wires need to be

inserted in one end of a splice and a single wire in the other end.

For additional Molex / Waldom Design and Solution kits please go to www.molexkits.com

Page 1 of 3

1801 Morgan Street

Rockford, Illinois 61102

800-435-2931

www.molexkits.com

Datasheet for 76650-0053

Features and Benefits

Applications

• Color-coded insulator allows easy

identification of terminal size and wire

gauge.

• The Step Down Butt Splice is the perfect

solution when 2 wires need to be spliced

to a single wire

• MRO (Maintenance Repair and Operations)

• Consumer applications

• Power applications

• Motor applications

• Powertrains

• Transportation

• Avikrimp provides a metal insulation

support sleeve for superior strain relief

• The color-coded Nylon insulating sleeve

extends beyond the metal support sleeve

• Terminal's funnel entrance is designed for

increased crimping rates by speeding wire

delivery into the crimp section and

eliminating wire strand fold back.

• A wire stop stamped into the crimp barrel

prevents insertion of over-stripped wires.

• Construction / Mining

• Energy / Power

• Production Equipment

• Instrumentation

• Environmental Equipment and Controls

• Blower Motors

Bill of Materials for Part No. 76650-0053

Country

Quantity in

Molex Part No.

19002-0001

19002-0005

19002-0024

19002-0028

19003-0001

19003-0011

19003-0040

19006-0001

19006-0005

19006-0011

19007-0001

19007-0021

19007-0029

Kit

of Origin

USA

Description