53111-2PC [MII]
POWER MOSFET OPTOCOUPLER; 功率MOSFET光耦
| 型号： | 53111-2PC |
| 厂家： | 
Micropac Industries |
| 描述： | POWER MOSFET OPTOCOUPLER |
| 文件： | 总11页 (文件大小：200K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
53111
POWER MOSFET OPTOCOUPLER,
90 V/1 Ω, Hermetically Sealed,
Mii
MICROCIRCUITS PRODUCTS
DIVISION
DSCC Approved 5962-9314001 and 5962-9314002
Features:
Applications:
•
Hermetically Sealed 8-Pin Dual-In-Line
•
•
•
•
•
Satellite/Space Systems
Military/High Reliability Systems
package
•
•
•
Small Size and Weight
Standard 28 VDC and 48 VDC Load Driver
Standard 24 VAC Load Driver
AC/DC Electromechanical and Solid State
Relay Replacement
Options: 5mA or 10mA input forward current
Performance Guaranteed over –55°C to
+125°C Ambient Temperature Range
AC/DC Signal & Power Switching
Maximum Average Current
AC/DC: 0.8 A
•
I/O Modules
•
•
DC only: 1.6 A
•
•
•
•
•
•
1500 VDC Withstand Test Voltage
High Transient Immunity
5 A Output Surge Current
Shock and Vibration Resistant
MIL-PRF-38534 Compliant
Equivalent to HSSR7111/7112
DESCRIPTION
The 53111 is a single channel, hermetically sealed, power MOSFET optocoupler. Low on-resistance of the
MOSFET output, combined with 1500 VDC isolation between input and output, makes this optocoupler ideal for
solid state relay applications. Operation is specified over the full military temperature range. The part is supplied in
an eight-pin, dual-in-line ceramic package, available as COTS, as fully compliant MIL-PRF-38534 Class H device,
or with custom screening. Lead options support both through-hole and surface-mount assembly. The part is
normally shipped with gold plated leads, but lead finishes per MIL-PRF-38534 are available.
Functionally, the device operates as a single-pole, normally open (1 Form A) solid state relay. The device is
actuated by an input current, which can be supplied from standard logic types such as open-collector TTL. The
input current biases a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The
photovoltaic array powers control circuitry that operates the output MOSFETs.
Optimum switching of either AC or DC loads is provided by a configurable output. For AC loads, connection A in
Figure 1 must be used. Connection A will also switch DC loads but connection B, in Figure 1, provides DC-only
operation with the advantages of substantial reduction in on-resistance and twice the output current capability as
that obtained with connection A.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 1 of 11
53111
Power MOSFET Optocoupler
___________________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Storage Temperature Range ..................................................................................................................-65°C to +150°C
Operating Ambient Temperature - TA.....................................................................................................-55°C to +125°C
Junction Temperature - TJ........................................................................................................................................150°C
Operating Case Temperature - TC.....................................................................................................................+145°C (1)
Lead Solder Temperature (1.6mm below seating plane).......................................................................... 260°C for 10s
Average Input Current - IF ........................................................................................................................................20 mA
Peak Repetitive Input Current - IFpk …(Pulse Width < 100ms; duty cycle < 50%) ...............................................40 mA
Peak Surge Input Current - IFPK surge…(Pulse Width < 0.2ms; duty cycle < 0.1%)........................................100 mA
Reverse Input Voltage - VR ....................................................................................................................................5 V
Average Output Current
Connection A – IO............................................................................................................................................0.8 A
Connection B - IO ............................................................................................................................................1.6 A
Single Shot Output Current - Figure 4
Connection A - IOpk surge…(Pulse width < 10ms) .............................................................................................5 A
Connection B - IOpk surge…(Pulse width < 10ms) ...........................................................................................10 A
Output Voltage
Connection A - VO ............................................................................................................................ -90 V to +90 V
Connection B - VO ............................................................................................................................... 0 V to +90 V
Average Output Power Dissipation - Figure 5 ............................................................................................800 mW (2)
RECOMMENDED OPERATING CONDITIONS:
PARAMETER
Input Current (on)
SYMBOL
DEVICE
TYPE
-01
MIN
MAX
UNITS
IF (ON)
10
5
20
20
mA
mA
VDC
°C
-02
Input Voltage (off)
VF (OFF)
TA
All
0
0.6
Operating Temperature
All
-55
+125
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 2 of 11
53111
Power MOSFET Optocoupler
ELECTRICAL SPECIFICATIONS
TA = -55°C to +125°C, unless otherwise specified.
Parameter
Sym.
Min.
Typ.*
Max.
Units
Test Conditions
VF = 0.6 V
IO = 10 µA
Notes
Output Withstand Voltage VO(OFF)
90
110
V
IF = 10 mA (for –01)
IF = 5 mA (for –02)
IO = 800 mA
Output On-Resistance
(Connection A)
0.40
1.0
Ω
Ω
(pulse duration ≤ 30 ms)
3,
R(ON)
Figure
IF = 10 mA (for –01)
IF = 5 mA (for –02)
IO = 1.6 A
1
Output On-Resistance
(Connection B)
0.12
0.25
(pulse duration ≤ 30 ms)
VF = 0.6 V
Output Leakage Current
Input Forward Voltage
IO (OFF)
VF
10-4
10
µA
V
VO = 90 V
IF = 10 mA (for –01)
IF = 5 mA (for –02)
1.0
5.0
1.24
1.7
Input Reverse Breakdown
Voltage
VR
V
IR = 100 µA
RH ≤ 45%, t = 5 s
VI-O = 1500 VDC
TA = 25°C
IF = 10 mA (for –01)
IF = 5 mA (for –02)
Input-Output Insulation
II-O
1.0
6.0
4, 5
µA
Figure
6
Turn-On Time
tON
1.25
0.02
ms
V
DD = 28 VDC
IO = 800 mA
IF = 10 mA (for –01)
IF = 5 mA (for –02)
VDD = 28 VDC
IO = 800 mA
Figure
6
Turn-Off time
tOFF
0.25
ms
VPEAK = 50 V
CM = 1000 pF
CL = 15 pF
RM ≥ 1 MΩ
Output Transient
Rejection
Figure
7
dVO/dt
dVI-O/dt
1000
500
V/µs
V/µs
V
DD = 5 V
V
I-O (PEAK) = 50 V
Input-Output Transient
Rejection
Figure
8
RL = 20 kΩ
CL = 15 pF
* All typical values are at TA = 25ºC, IF (ON) = 10 mA (for -01) or 5 mA (for –02), VF (OFF) = 0.6V unless otherwise
specified.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 3 of 11
53111
Power MOSFET Optocoupler
TYPICAL CHARACTERISTICS
All typical values are at TA = 25°C, IF (ON) = 10mA, VF (OFF) = 0.6V unless otherwise specified.
Parameter
Symbol
Test
Conditions
Typ.
Units
Notes
VO = 28 V
f = 1 MHz
IF = 10 mA
IO = 0 mA
Output Off-Capacitance
Output Offset Voltage
CO (OFF)
145
2
pF
VOS
∆VF /∆TA
CIN
6
µV
mV/°C
pF
Input Diode Temperature
Coefficient
IF = 10 mA
-1.4
20
VF = 0 V
f = 1 MHz
VI-O = 0 V
f = 1 MHz
VI-O = 500 V
t = 60 s
Input Capacitance
7
4
4
Input-Output
Capacitance
CI-O
RI-O
1.5
1013
pF
Input-Output Resistance
Ω
Notes:
1. Maximum junction to case thermal resistance for the device is 15ºC/W, where case temperature, TC, is
measured at the center of the package bottom.
2. For rating, see Figure 5. The output power PD rating curve is obtained when the part is handling the maximum
average output current IO as shown in Figure 3.
3. During the pulsed RON measurement (IO duration < 30 ms), ambient (TA) and case temperature (TC) are equal.
4. Pins 2 through 3 shorted together and pins 5 through 8 shorted together.
5. This is a momentary withstand test, not an operating condition.
6. VOS is a function of IF and is defined between pins 5 and 8, with pin 5 as the reference. VOS must be measured
in a stable ambient (free of temperature gradients).
7. Zero-bias capacitance measured between the LED anode and cathode.
CAUTION:
Care should be taken not to exceed the maximum output power dissipation, maximum case temperature, and
maximum junction temperature when repetitively switching loads.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 4 of 11
53111
Power MOSFET Optocoupler
Case outlines
P, X, Y, AND Z
Terminal symbol
Terminal number
Connection A
Conneciton B
(DC load only)
(AC or DC load)
NC
NC
1
2
3
4
5
6
7
8
V
V
F+
F+
V
V
F-
F-
NC
NC
V
V
O+
O-
NC
NC
NC
N
V
O-
V
O+
O+
NC = No connection
CONNECTION A
AC/DC CONNECTION
CONNECTION B
DC CONNECTION
I
I
O
O
8
7
6
5
8
7
6
5
1
2
3
4
1
2
3
4
I
+
+
-
I
F
V
F
V
O
+
-
+
-
V
V
O
F
F
-
Figure 1 - Terminal Connections
INPUT
OUTPUT
OFF
ON
OFF
ON
Figure 2 - Truth Table
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com E-MAIL: hybridsales@micropac.com 5/22/02
Pg. 5 of 11
53111
Power MOSFET Optocoupler
1.0
0.8
0.6
12
10
8
I ≥10 mA
F
CONNECTION - B
6
4
CONNECTION - A
0.4
0.2
0
CONNECTION - A
I ≥10 mA
2
0
F
- -
__
θ
θ
= 40°C/W
CA
= 80°C/W
CA
-55 -25
5
35
65 95 125 155
10
100
1000
T
- AMBIENT TEMPERATURE - °C
PULSE DURATION - ms
A
Figure 3. Maximum Average Output Current
Rating vs. Ambient Temperature.
Figure 4. Single Shot (nonrepetitive)
Output Current vs. Pulse Duration.
1.0
0.8
0.6
0.4
0.2
CONNECTION - A
I ≥10 mA
F
__
- -
θ
θ
= 40°C/W
CA
= 80°C/W
CA
0
-55 -25
5
35
65 95 125 155
T
- AMBIENT TEMPERATURE - °C
A
Figure 5. Output Power Rating vs. Ambient Temperature.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 6 of 11
53111
Power MOSFET Optocoupler
V
PULSE GEN
DD
(SEE NOTE 1)
R
L
V
O
MONITOR
NODE
8
7
6
5
1
2
3
4
I
F
+
V
-
C
= 25 pF
L
F
(SEE NOTE 2)
I
F
MONITOR
R
M
200
GND
GND
50%
50%
I
F
PULSE
WIDTH
= 15 ms
V
O
90%
10%
t
t
OFF
ON
NOTES:
1. PULSE GENERATOR HAS THE FOLLOWING CHARACTERISTICS: OUTPUT IMPEDANCE = 50
AND t = t = 5.0 ns.
r
f
2. LOAD CAPACITANCE (C ) INCLUDES PROBE AND JIG CAPACITANCE.
L
Figure 6. Switching Test Circuit and Waveform.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 7 of 11
53111
Power MOSFET Optocoupler
V
M
8
7
6
5
MONITOR
NODE
1
2
3
4
I
F
INPUT
OPEN
C
R
M
M
+
F
-
V
V
O(PEAK)
-
+
PULSE
GENERATOR
90%
90%
V
O(PEAK)
10%
10%
t
t
r
f
V
(MAX) < 5V
M
d V
d
(0.8) V
(0.8) V
O (PEAK)
O
O (PEAK)
=
OR
t
t
r
f
t
OVERSHOOT ON V
O (PEAK) IS TO BE < 10%
NOTES:
1. C INCLUDES PROBE AND FIXTURE CAPACITANCE.
M
M
2. R INCLUDES PROBE AND FIXTURE RESISTANCE.
Figure 7. Output Transient Rejection Test Circuit and Waveform.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 8 of 11
53111
Power MOSFET Optocoupler
V
DD
R
L
V
8
7
6
5
1
2
3
4
O
I
F
+
C
V
F
L
-
S1
A
B
VIN
V
I-0 (PEAK)
-
+
PULSE
GENERATOR
90%
90%
V
I-0 (PEAK)
10%
10%
t
t
r
f
V
O (OFF)
AT A (V = 0 V)
V
O (OFF)
(MIN) > 3.25 V
S
1
F
V
(MAX) < 0.8 V
O (ON)
V
O (ON)
AT B (NOTE 2)
S
1
dV
dt
(0.8) V
(0.8) V
I-0 (PEAK)
I-0
I-0 (PEAK)
=
OR
I-0 (PEAK) IS TO BE < 10%
t
t
r
f
OVERSHOOT ON V
NOTES:
1. LOAD CAPACITANCE (C )INCLUDES PROBE AND FIXTURE CAPACITANCE.
L
2. FOR DEVICE TYPE 01, I =10mA,
F
FOR DEVICE TYPE 02, I =5mA.
F
Figure 8. Input-Output Transient Rejection Test Circuit and Waveform.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 9 of 11
53111
Power MOSFET Optocoupler
Case Outline P
31757 USA
53111
.310 (7.87)
.290 (7.37)
.320 (8.13)
ESD
MAX.
SYMBOL
Q XXXXX
PIN 1
.050 (1.27)
.035 (0.89)
.390 (9.91)
.370 (9.41)
.170 (4.32)
MAX.
.150 (3.81) MIN.
.050 (1.27)
.030 (0.76)
.020 (0.51)
MAX.
.110 (2.79)
.090 (2.29)
Case Outline X
.390 (9.91)
.370 (9.41)
.320 (8.13)
MAX
.050 (1.27)
.035 (0.89)
.013 (0.33)
.007 (0.18)
.020 (0.51)
MIN
.170 (4.32)
MAX.
.180 (4.57)
MAX
.047 (1.19)
TYP
.110 (2.79)
.090 (2.29)
.065 (1.65)
.055 (1.40)
5°
0°
.390 (9.91)
.020 (.051)
MAX.
.380 (7.87)
SEATING
PLANE
Case Outline Y
.320 (8.13)
MAX
.390 (9.91)
.370 (9.41)
.050 (1.27)
.035 (0.89)
.170 (4.32)
MAX.
.020 (0.51)
MIN
.013 (0.33)
.110 (2.79)
.090 (2.29)
.007 (0.18)
.055 (1.40)
.045 (1.14)
.310 (7.87)
.290 (7.37)
.020 (0.51)
MAX.
SEATING PLANE
Case Outline Z
.320 (8.13)
MAX
.390 (9.91)
.370 (9.41)
.050 (1.27)
.035 (0.89)
.020 (0.51)
MIN
.140 (3.56)
MAX.
.013 (0.33)
.007 (0.18)
.110 (2.79)
.090 (2.29)
.045 (1.14)
.035 (0.89)
.310 (7.87)
.290 (7.37)
SEATING PLANE
NOTES:
1. PIN 1 IS INDICATED BY THE ESD TRIANGLE MARKED ON THE LID OF THE PACKAGE.
2. DIMENSIONS ARE IN INCHES, (mm).
3. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY.
4. UNLESS OTHERWISE SPECIFIED, TOLERANCE IS ±.005 (0.13mm).
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 10 of 11
53111
Power MOSFET Optocoupler
ORDERING GUIDE
The followings are the cross-reference of Micropac part numbers versus Standard Military PIN. Please contact
Micropac for other desired options.
Micropac Part Number
53111-1PA
53111-1PC
53111-1XA
53111-1XC
53111-1YA
53111-1YC
53111-1ZA
53111-1ZC
53111-2PA
53111-2PC
53111-2XA
53111-2XC
53111-2YA
53111-2YC
53111-2ZA
53111-2ZC
Standard Military Drawing PIN
5962-9314001HPA
5962-9314001HPC
5962-9314001HXA
5962-9314001HXC
5962-9314001HYA
5962-9314001HYC
5962-9314001HZA
5962-9314001HZC
5962-9314002HPA
5962-9314002HPC
5962-9314002HXA
5962-9314002HXC
5962-9314002HYA
5962-9314002HYC
5962-9314002HZA
5962-9314002HZC
Case Outline
P
P
X
X
Y
Y
Z
Z
P
P
X
X
Y
Y
Z
Z
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
www.micropac.com
E-MAIL: hybridsales@micropac.com
5/22/02
Pg. 11 of 11
相关型号：
53114-0610
Board Connector, 6 Contact(s), 1 Row(s), Male, Right Angle, 0.079 inch Pitch, Solder Terminal, Receptacle
MOLEX
53114-1110
Board Connector, 11 Contact(s), 1 Row(s), Male, Right Angle, 0.079 inch Pitch, Solder Terminal, Receptacle
MOLEX
©2020 ICPDF网 联系我们和版权申明