OX-1741-DAT-5097-10M0000000 [MICROSEMI]

HCMOS Output Clock Oscillator, 10MHz Nom, SMD, 13 PIN;
OX-1741-DAT-5097-10M0000000
型号: OX-1741-DAT-5097-10M0000000
厂家: Microsemi    Microsemi
描述:

HCMOS Output Clock Oscillator, 10MHz Nom, SMD, 13 PIN

文件: 总6页 (文件大小:2179K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
OX-174  
Ultra Low Noise  
Oven Controlled Crystal Oscillator  
OX-174  
The OX-174 is a low phase noise, high-stability ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor  
of -175 dBc/Hz, and typical ADEV below 2E-12 for t=0.1 to 100 s. The OX-174 is a member of the OX-17 oscillator series. Other  
oscillators in the series include the OX-170 standard oscillator, OX-171 high stability oscillator, OX-172 optimized for 1588 solutions,  
and the OX-175 low phase noise, high frequency oscillator. The Microsemi design team will also help develop custom solutions  
where performance optimization is required for specific applications. Please contact the factory for customization options.  
Features  
• Reflow Process Compatible  
Applications  
• Military Radar  
• Temperature Stability to 5 ppb  
• Frequency Range 5 to 20 MHz  
• Standard Frequency:10 MHz  
• Instrumentation and Test Equipment  
• Synthesizers  
• Military Communication Equipment  
• DRO references  
• CMOS and Sinewave Options Available  
• Satellite Communications  
Performance Specifications  
Phase Noise Ordering Codes at 10 MHz , Sinewave Output  
Frequency Offset (Hz)  
A
B
C (12V only) D (5V only)  
Unit  
Condition  
1
-95  
-100  
-130  
-155  
-165  
-170  
-170  
-105  
-135  
-157  
-167  
-175  
-175  
-105  
-135  
-157  
-167  
-172  
-173  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
Maximum values  
All EFC settings  
10  
-125  
-150  
-160  
-170  
-170  
100  
1000  
10,000  
100,000  
Phase Noise Ordering Codes at 10 MHz, CMOS Output  
Frequency Offset (Hz)  
A
B
C
Unit  
Condition  
1
-95  
-100  
-130  
-155  
-160  
-165  
-165  
-105  
-135  
-157  
-160  
-165  
-165  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
Maximum values  
All EFC settings  
(5V only)  
10  
-125  
-150  
-160  
-160  
-160  
100  
1000  
10,000  
100,000  
Page 1 of 6  
Performance Specifications  
Parameter  
Min  
Typical  
Max  
Units  
Condition  
2
1
1.5  
1.8  
2
5
3
4
5
5
E-12  
E-12  
E-12  
E-12  
E-12  
0.1s tau  
1 s tau  
10 s tau  
100 s tau  
1000 s tau  
Allan Deviation  
@ 10MHz  
For oscillators with TDEV and MTIE requirements please review the OX-172 datasheet.  
Frequency Stabilities1  
(Stabilities listed for 10 MHz. For stabilities above 10 MHz values may degrade. Please contact factory)  
Parameter  
Min  
Typical  
Max  
Units  
Condition  
vs. Operating Temperature  
Range (referenced to +25°C)  
-5  
-10  
+5  
-10  
ppb  
ppb  
-20 to +70°C  
-40 to +85°C  
For better stability please review the OX-171 datasheet.  
Initial Tolerance  
vs. Supply Voltage Change  
vs. Load Change  
-50  
-2  
-2  
-0.5  
-100  
-30  
+50  
+2  
+2  
+0.5  
+100  
+30  
ppb  
ppb  
ppb  
ppb  
ppb  
ppb  
at time of shipment, nominal EFC  
VS 5ꢀ  
Load 5ꢀ  
after 7 days operation  
after 7days operation  
vs. Aging / Day  
vs. Aging / 1st Year  
vs. Aging / Year (following years)  
Retrace2  
-10  
+10  
5
ppb  
Warm-up Time  
minutes  
to 10ppb of final frequency ( 1 hour reading)  
@ +25°C  
Supply Voltage (Vs)  
Parameter  
Min  
4.75  
11.4  
Typical  
Max  
5.25  
12.6  
3.5  
Units  
Condition  
ordering option D  
5.0  
VDC  
VDC  
Supply Voltage (Vs)  
12.0  
ordering option B  
Watts  
Watts  
Watts  
Watts  
during warm-up, all temperatures  
steady state @ +25°C  
steady state @ -40°C  
steady state @ +85°C  
1.8  
Power Consumption  
3.3  
0.5  
RF Output  
Start Time  
1
s
time required to achieve 90ꢀ of amplitude  
5 Volt only  
Signal  
HCMOS  
Load  
15  
pF  
Signal Level (Vol)  
Signal Level (Voh)  
Duty Cycle  
Rise and Fall Time (Tr/Tf)  
Signal  
0.5  
3.5  
45  
55  
10  
@ (Voh-Vol)/2  
ns  
Sine Wave  
Load  
50  
+8  
+5  
Ω
+7  
+4  
+10  
+7  
dBm  
dBm  
dBc  
dBc  
Vs=12VDC  
Vs=5VDC  
Output Power  
Harmonics  
Spurious  
-30  
-80  
Page 2 of 6  
Frequency Tuning (EFC)  
Parameter  
Min  
400  
Typical  
Max  
800  
Units  
Condition  
Tuning range  
ppb  
(fixed frequency option available)  
Linearity  
15  
Tuning Slope  
Positive  
Input Impedance  
Bandwidth Modulation  
100  
kOhm  
Hz  
150  
0.0  
0.0  
4.35  
10  
VDC  
VDC  
with Vs=5.0 VDC  
with Vs=12.0 VDC  
Control Voltage Range  
Reference Voltage Output (Vref)  
4.26  
9.8  
4.35  
10  
4.44  
10.2  
VDC  
VDC  
with Vs = 5.0 VDC  
with Vs =12 VDC  
Reference Voltage (Vref)  
The OX-174 series can be configured without a voltage reference. Please contact the factory for ordering information.  
Additional Parameters  
Parameter  
Min  
Typical  
Max  
Units  
1.5  
Condition  
g-sensitivity  
ppb/g  
g-sensitivity of 0.5 ppb/g available in this package size. Please contact factory for ordering information.  
For g-sensitivity <0.5 ppb/g please review the OX-043 series.  
Weight  
25  
g
Absolute Maximum Ratings  
6.5  
VDC  
VDC  
with Vs= 5.0 VDC  
with Vs= 12 VDC  
Supply Voltage (Vs)  
Output Load  
15.0  
25  
open  
50  
Ω
pF  
Sinewave  
CMOS  
Operable temperature range implies the  
device will continue to operate with no long-  
term damage to unit; however, it will not be  
specification compliant outside the operating  
temperature range.  
Operable Temperature Range  
-55  
+95  
°C  
Environmental and Product Classification  
Shock (Endurance)  
Sine Vibration (Endurance)  
Random Vibration (Endurance)  
Humidity  
MIL-STD-202, Method 213, Condition J, 30g 11 ms  
MIL-STD-202, Method 201 and 204, Condition A, except 5g to 500 Hz, 1 sweep each axis  
MIL-STD-202, Method 214, Condition I-D  
MIL-STD-202, Method 103, Condition B, 100ꢀ rh  
MIL-STD-202, Method 112, Condition D, hermetic, washable  
MIL-STD-202, Method 105, sea level to space  
MIL-STD-202, Method 210, Condition A,B,C  
MIL-STD-202, Method 211, Condition C (5 bends at 45o, 2 lbs)  
1
Seal  
Altitude  
Resistance to Soldering Heat  
Terminal Strength  
Moisture Sensitive Level  
RoHS  
6 (fully compliant)  
Storage Temperature Range  
-55  
+125  
°C  
Page 3 of 6  
Page 4 of 6  
Outline Drawing / Enclosure  
Through hole  
Package configuration A  
Height “H”  
18.2 max  
Pin Length “L”  
4.5 mm min  
0
Pin Connections  
1
Electronic Frequency Control Input (EFC)  
No Connect for Fixed frequency Oscillators  
2
3
4
5
Reference Voltage (Vref)  
Supply Voltage Input (Vs)  
RF Output  
Ground (Case)  
Dimensions in mm  
Surface mount  
Package configuration B  
Height  
“H”  
Pin Length “L”  
n/a  
1
20.3 max  
Pin Connections  
4,5,6,7,  
No Connect  
11,12,13  
1
Electronic Frequency Control Input (EFC)  
No Connect for Fixed frequency Oscillators  
2
3
Reference Voltage (Vref)  
Supply Voltage Input (Vs)  
RF Output  
8
9,10  
Ground (Case)  
Page 5 of 6  
tion3  
nforma  
Ordering I  
OX - 174 0 - D E E - 108 1 - 10M0000000  
Frequency  
5M00000000  
10M0000000  
12M8000000  
20M0000000  
Product Family  
OX: OCXO  
Model  
174  
(others available on request)  
Frequency Control  
Height and Package  
0:No Tuning, phase noise code A  
1:No Tuning, phase noise code B  
2:No Tuning, phase noise code C  
3:Frequency Tuning, phase noise code A  
4:Frequency Tuning, phase noise code B  
5:Frequency Tuning, phase noise code C  
6:No Tuning, phase noise code D  
7:Frequency Tuning, phase noise code D  
0: 18.2 mm, package A - THT  
1: 20 mm, package B - SMD  
Supply Voltage  
B: 12V  
D: 5V  
RF Output Code  
A: HCMOS (5 V only)  
E: Sinewave  
Stability Code  
509: 5 ppb  
108 10 ppb  
Temperature Range  
E: -40°C to +85°C  
J: -20°C to +70°C  
T: 0°C to +70°C  
Additional Ordering Options  
Additional ordering options available include custom aging rates, custom temperature ranges, custom temperature stabilities,  
custom phase noise requirements, improved g-sensitivity, and oscillators with no voltage reference output on pin 2. These  
modifications require a custom dash number - please contact the factory for additional information.  
Design Tools  
Microsemi stocks the following evaluation board for this product:  
OCXO Evaluation Board  
Application Notes:  
None  
Notes:  
1. Unless otherwise stated, all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency  
control voltage, load, and temperature (25°C).  
2. Retrace is defined as the frequency difference between the end of two 24 hour on power periods with a 24 hour off period in  
between while at a constant temperature.  
3. Not all options and codes available at all frequencies.  
For Additional Information, Please Contact  
USA:  
Microsemi Corporation  
One Enterprise  
Aliso Viejo, CA 92656  
Tel: 1.800.713.4113  
Fax: 1.949.215.4996  
Disclaimer  
Microsemi reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights  
under any patent accompany the sale of any such product(s) or information.  
Rev: 4/18/2018 jar  
Page 6 of 6  

相关型号:

MICROSEMI

OX-1741-DEJ-5097-10M0000000

Sine Output Oscillator, 10MHz Nom, SMD, 13 PIN
MICROSEMI

OX-1741-DET-5096-10M0000000

Sine Output Oscillator, 10MHz Nom, SMD, 13 PIN
MICROSEMI

OX-175

Ultra Low Noise Oven Controlled Crystal Oscillator
VECTRON

OX-175_14

Ultra Low Noise Oven Controlled Crystal Oscillator
VECTRON

OX-200

Oven Controlled Crystal Oscillator
VECTRON

OX-2000-BAE-107

Oven Controlled Crystal Oscillator
VECTRON

OX-2000-BAE-108

Oven Controlled Crystal Oscillator
VECTRON

OX-2000-BAE-208

Oven Controlled Crystal Oscillator
VECTRON

OX-2000-BAE-258

Oven Controlled Crystal Oscillator
VECTRON

OX-2000-BAE-508

Oven Controlled Crystal Oscillator
VECTRON

OX-2000-BAJ-107

Oven Controlled Crystal Oscillator
VECTRON