MXL1.5KE200A [MICROSEMI]

Trans Voltage Suppressor Diode, 1500W, 171V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1 , 2 PIN;
MXL1.5KE200A
元器件型号: MXL1.5KE200A
生产厂家: MICROSEMI CORPORATION    MICROSEMI CORPORATION
描述和应用:

Trans Voltage Suppressor Diode, 1500W, 171V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1 , 2 PIN

局域网二极管
PDF文件: 总7页 (文件大小:418K)
下载文档:  下载PDF数据表文档文件
型号参数:MXL1.5KE200A参数
是否无铅 含铅
是否Rohs认证 不符合
生命周期Active
包装说明O-PALF-W2
针数2
制造商包装代码CASE 1
Reach Compliance Codecompliant
ECCN代码EAR99
HTS代码8541.10.00.50
风险等级5.41
其他特性HIGH RELIABILITY
最大击穿电压210 V
最小击穿电压190 V
外壳连接ISOLATED
配置SINGLE
二极管元件材料SILICON
二极管类型TRANS VOLTAGE SUPPRESSOR DIODE
JESD-30 代码O-PALF-W2
JESD-609代码e0
最大非重复峰值反向功率耗散1500 W
元件数量1
端子数量2
封装主体材料PLASTIC/EPOXY
封装形状ROUND
封装形式LONG FORM
峰值回流温度(摄氏度)NOT SPECIFIED
极性UNIDIRECTIONAL
最大功率耗散1.52 W
认证状态Not Qualified
最大重复峰值反向电压171 V
表面贴装NO
技术AVALANCHE
端子面层TIN LEAD
端子形式WIRE
端子位置AXIAL
处于峰值回流温度下的最长时间NOT SPECIFIED
Base Number Matches1
MAX34334CSE前5页PDF页面详情预览
M1.5KE6.8A – M1.5KE400CA(e3)
Screening in
reference to
MIL-PRF-19500
available
Available
1500 Watt Unidirectional and Bidirectional
Transient Voltage Suppressor
DESCRIPTION
The popular Transient Voltage Suppressor series of M1.5KE6.8 – M1.5KE400CA with its
various upscreening options offer an extended voltage range and provides a wide variety of
commercial, high reliability, RoHS and bidirectional options. All have the same high peak
pulse power rating of 1500 W and extremely fast response time. They can protect from
secondary effects of lightning per IEC61000-4-5 and the class levels as shown below as well
as voltage transients from inductive switching and RFI. Since their response time is virtually
instantaneous, they also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.
Important:
For the latest information, visit our website
http://www.microsemi.com.
FEATURES
High reliability devices with fabrication and assembly lot traceability
Economical plastic encapsulated TVS series for thru-hole mounting
3σ lot norm screening performed on standby current (I
D
)
100% surge tested devices suppress transients up to 1500 watts @ 10/1000 µs (see
figure 1)
Enhanced reliability screening available in reference to MIL-PRF-19500. Refer to
Hirel Non-
Hermetic Product Portfolio
for more details on the screening options.
(See
part nomenclature
for all options.)
Enhanced reliability source controlled devices have wafer fabrication and assembly lot traceability
Moisture classification is “Level 1” with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant versions available
Case 1 Package
APPLICATIONS / BENEFITS
High-reliability devices
Protection from switching and RFI induced transients
Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively
Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance:
Class 1: M1.5KE6.8A to M1.5KE200CA
Class 2: M1.5KE6.8A to M.5KE180CA
Class 3: M1.5KE6.8A to M1.5KE91CA
Class 4: M1.5KE6.8A to M1.5KE43CA
Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance:
Class 1: M1.5KE6.8A to M1.5KE110CA
Class 2: M1.5KE6.8A to M1.5KE56CA
Class 3: M1.5KE6.8A to M1.5KE27CA
Class 4: M1.5KE6.8A to M1.5KE13CA
Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance:
Class 2: M1.5KE6.8A to M1.5KE24CA
Class 3: M1.5KE6.8A to M1.5KE12CA
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
RF01008, Rev. E (11/15/13)
©2013 Microsemi Corporation
Page 1 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
MAXIMUM RATINGS
Parameters/Test Conditions
Junction and Storage Temperature
Thermal Resistance, Junction to Lead @ 0.375 inch (10
mm) from body
(1)
Thermal Resistance, Junction to Ambient
(2)
Peak Pulse Power @ T
L
= +25 ºC
Rated Average Power Dissipation
@ T
L
= +40 ºC
@ T
A
= +25 ºC
Unidirectional
T
clamping
(0 volts to V
(BR)
min)
Bidirectional
Surge Peak Forward Current
Solder Temperature @ 10 s
(3)
Symbol
T
J
and T
STG
R
ӨJL
R
ӨJA
P
PP
P
M(AV)
Value
-65 to +150
22
82
1500
5
(1)
1.52
< 100
<5
200
260
Unit
ºC
ºC/W
ºC/W
W
W
ps
ns
A
o
I
FSM
T
SP
C
Notes:
1. When mounted on FR4 PC board with 4 mm
2
copper pads (1 oz) and track width 1 mm, length 25 mm.
2. At 10/1000
µs
with repetition rate of 0.01% or less (see
Figure 1).
3. At 8.3 ms half-sine wave for unidirectional devices only.
MECHANICAL and PACKAGING
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating readily solderable per MIL-STD-750 method 2026
MARKING: Part number and polarity band
POLARITY: Cathode indicated by band. No cathode band on bidirectional devices.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 1.5 grams
See
Package Dimensions
on last page.
PART NOMENCLATURE
M
Reliability Level*
M
MA
MX
MXL
(*See
Hirel Non-Hermetic
Product Portfolio)
Peak Pulse Power
Kilowatt Rating
Encapsulated Plastic Package
1.5
K
E
6.5
C
A
(e3)
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
+/- 5% Tolerance Level
Polarity
C = Bi-directional
Blank = Unidirectional
Nominal Breakdown Voltage
(See
Electrical Characteristics
table)
RF01008, Rev. E (11/15/13)
©2013 Microsemi Corporation
Page 2 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
SYMBOLS & DEFINITIONS
Definition
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in
temperature that caused it expressed in %/°C or mV/°C.
Breakdown Current: The current used for measuring breakdown voltage V
(BR)
.
Breakdown Voltage: The voltage across the device at a specified current I
(BR)
in the breakdown region.
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an
impulse current (I
PP
) for a specified waveform.
Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the maximum-rated value of the product of I
PP
and V
C
.
Standby Current: The current through the device at rated stand-off voltage.
Symbol
α
V(BR)
I
(BR)
V
(BR)
V
WM
V
C
I
PP
P
PP
I
D
RF01008, Rev. E (11/15/13)
©2013 Microsemi Corporation
Page 3 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
ELECTRICAL CHARACTERISTICS
@ 25
o
C
Rated
Standoff
Voltage
V
WM
(Note 1)
Volts
5.80
6.40
7.02
7.78
8.55
9.40
10.22
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
324.00
Breakdown
Voltage
Maximum
Clamping
Voltage
V
C
@ I
PP
Maximum
Standby
Current
I
D
@ V
WM
Maximum
Peak Pulse
Current
I
PP
(Fig. 2)
A
143.0
132.0
124.0
112.0
103.0
96.0
90.0
82.0
71.0
67.0
59.5
54.0
49.0
45.0
40.0
36.0
33.0
30.0
28.0
25.3
23.2
21.4
19.5
17.7
16.3
14.6
13.3
12.0
11.0
9.9
9.1
8.4
7.2
6.8
6.4
6.1
5.5
4.6
5.0
5.0
4.0
4.0
Maximum
Temperature
Coefficient of
V
(BR)
αV
(BR)
%/
o
C
0.057
0.061
0.065
0.068
0.073
0.075
0.078
0.081
0.084
0.086
0.088
0.090
0.092
0.094
0.096
0.097
0.098
0.099
0.100
0.101
0.101
0.102
0.103
0.104
0.104
0.105
0.105
0.106
0.106
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.111
0.111
0.111
Industry
Type
Number
M1.5KE6.8A
M1.5KE7.5A
M1.5KE8.2A
M1.5KE9.1A
M1.5KE10A
M1.5KE11A
M1.5KE12A
M1.5KE13A
M1.5KE15A
M1.5KE16A
M1.5KE18A
M1.5KE20A
M1.5KE22A
M1.5KE24A
M1.5KE27A
M1.5KE30A
M1.5KE33A
M1.5KE36A
M1.5KE39A
M1.5KE43A
M1.5KE47A
M1.5KE51A
M1.5KE56A
M1.5KE62A
M1.5KE68A
M1.5KE75A
M1.5KE82A
M1.5KE91A
M1.5KE100A
M1.5KE110A
M1.5KE120A
M1.5KE130A
M1.5KE150A
M1.5KE160A
M1.5KE170A
M1.5KE180A
M1.5KE200A
M1.5KE220A
M1.5KE250A
M1.5KE300A
M1.5KE350A
M1.5KE400A
V
(BR)
@
I
(BR)
Volts
Min. Max.
mA
6.45 – 7.14
10
7.13 – 7.88
10
7.79 – 8.61
10
8.65 – 9.55
1
9.50 – 10.50
1
10.50 – 11.60
1
11.40 – 12.60
1
12.40 – 13.70
1
14.30 – 15.80
1
15.20 – 16.80
1
17.10 – 18.90
1
19.00 – 21.00
1
20.90 – 23.10
1
22.80 – 25.20
1
25.70 – 28.40
1
28.50 – 31.50
1
31.40 – 34.70
1
34.20 – 37.80
1
37.10 – 41.00
1
40.90 – 45.20
1
44.70 – 49.40
1
48.50 – 53.60
1
53.20 – 58.80
1
58.90 – 65.10
1
64.60 – 71.40
1
71.30 – 78.80
1
77.90 – 86.10
1
86.50 – 95.50
1
95.00 – 105.00
1
105.00 – 116.00
1
114.00 – 126.00
1
124.00 – 137.00
1
143.00 – 158.00
1
152.00 – 168.00
1
162.00 – 179.00
1
171.00 – 189.00
1
190.00 – 210.00
1
209.00 – 231.00
1
237.00 – 263.00
1
285.00 – 315.00
1
332.00 – 368.00
1
380.00 – 420.00
1
Volts
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
µA
1000
500
200
50
10
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
NOTES:
1. Normal selection criteria for TVS devices is by rated stand-off voltage (V
WM
) and should be equal or greater than dc or continuous peak
operating voltage.
2. TVS devices are tested to maximum peak pulse current (I
PP
) with clamping voltage monitored. This surge capability is one of the most
significant electrical characteristics of the device and should be considered as part of customer quality inspections.
3. For Bidirectional types having V
WM
of 8 volts and under, the I
D
leakage current is doubled. Also for bidirectional parts, the capacitance
will be half that shown in Fig. 2 for zero bias.
4. For unidirectional, the forward voltage (V
F
) is 3.5 volts maximum at 100 Amps peak for 8.3 ms half-sine wave.
RF01008, Rev. E (11/15/13)
©2013 Microsemi Corporation
Page 4 of 7
M1.5KE6.8A – M1.5KE400CA(e3)
GRAPHS
P
PP
- Peak Pulse Power - kW
Pulse Time (tw) in µs
FIGURE 1
Peak Pulse Power vs Pulse Time (tw) in µs
Pulse Current in Percent of I
PP
t – Time – ms
Test waveform parameters: tr=10 µs, tp=1000µs
FIGURE 2
Pulse Waveform for 10/1000 Exponential Surge
RF01008, Rev. E (11/15/13)
©2013 Microsemi Corporation
Page 5 of 7
相关元器件产品Datasheet PDF文档

MXL1.5KE200A/TR

Trans Voltage Suppressor Diode, 1500W, 171V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1, 2 PIN
1 MICROSEMI

MXL1.5KE200AE3

Trans Voltage Suppressor Diode, 1500W, 171V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, CASE 1, 2 PIN
1 MICROSEMI

MXL1.5KE200AE3

Trans Voltage Suppressor Diode, 1500W, 171V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, CASE 1, 2 PIN
0 MICROSEMI

MXL1.5KE200AE3TR

1500W, UNIDIRECTIONAL, SILICON, TVS DIODE, ROHS COMPLIANT, PLASTIC, CASE 1, 2 PIN
0 MICROSEMI

MXL1.5KE200ATR

1500W, UNIDIRECTIONAL, SILICON, TVS DIODE, PLASTIC, CASE 1, 2 PIN
0 MICROSEMI

MXL1.5KE200CAE3

Trans Voltage Suppressor Diode, 1500W, 171V V(RWM), Bidirectional, 1 Element, Silicon, ROHS COMPLIANT, CASE 1, 2 PIN
0 MICROSEMI