首页 |元器件品牌

M15KP60CA [MICROSEMI]

Trans Voltage Suppressor Diode, 15000W, 60V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN;
M15KP60CA
型号： M15KP60CA
厂家： Microsemi    Microsemi
描述：

Trans Voltage Suppressor Diode, 15000W, 60V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN

局域网 二极管
文件： 总7页 (文件大小：604K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
M15KP22A – M15KP280CA(e3)  
Screening in  
15,000 Watt Transient Voltage Suppressor  
reference to  
MIL-PRF-19500  
available  
Available  
(TVS) Protection Device  
DESCRIPTION  
This Transient Voltage Suppressor series of M15KP22A – M15KP280CA offers an extended  
voltage range and also provides a variety of high reliability, uni- and bi-directional options as  
well. RoHS compliant versions are also available. These devices have the ability to clamp  
dangerous high voltage transients such as secondary effects of lightning strikes, providing  
circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is  
virtually instantaneous. It also provides protection from transients caused by inductive load  
dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4.  
Important: For the latest information, visit our website http://www.microsemi.com.  
FEATURES  
Available in both unidirectional and bidirectional configurations  
3σ lot norm screening performed on standby current ID  
100% surge tested devices  
Suppresses transients up to 15 kW @ 10/1000 s and 100 kW @ 8/20 s (see Figure 1)  
Various screenings in reference to MIL-PRF-19500 are available. Refer to Hirel Non-Hermetic  
Product Portfolio for more details on the screening options.  
DO-204AR  
(See part nomenclature for all options.)  
Package  
High reliability controlled devices have wafer fabrication and assembly lot traceability  
Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B  
RoHS compliant versions are available  
APPLICATIONS / BENEFITS  
Selections from 22 to 280 volts stand-off voltage (VWM  
Economical TVS series for thru-hole mounting  
Protection from switching transients & induced RFI  
Fast sub-nanosecond response (unidirectional)  
)
Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively  
Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance:  
Class 1, 2, 3, 4: M15KP22A to M15KP280CA  
MSC – Lawrence  
6 Lake Street,  
Class 5: M15KP22A to M15KP280CA (short distance)  
Class 5: 1M5KP22A to M15KP110CA (long distance)  
Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance:  
Class 1 & 2: M15KP22A to M15KP280CA  
Lawrence, MA 01841  
1-800-446-1158 or  
(978) 620-2600  
Fax: (978) 689-0803  
Class 3: M15KP22A to M15KP240CA  
MSC – Ireland  
Class 4: M15KP22A to M15KP120CA  
Gort Road Business Park,  
Ennis, Co. Clare, Ireland  
Tel: +353 (0) 65 6840044  
Fax: +353 (0) 65 6822298  
Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance:  
Class 2: M15KP22A to M15KP220CA  
Class 3: M15KP22A to M15KP110CA  
Class 4: M15KP22A to M15KP54CA  
Website:  
www.microsemi.com  
RF01011, Rev. E (01/12/16)  
©2016 Microsemi Corporation  
Page 1 of 7  
M15KP22A – M15KP280CA(e3)  
MAXIMUM RATINGS @ 25 ºC unless otherwise noted  
Parameters/Test Conditions  
Symbol  
Value  
Unit  
oC  
Junction and Storage Temperature  
TJ and TSTG -65 to +150  
Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm)  
lead length from body  
RӨJL  
20  
oC/W  
Thermal Resistance, Junction to Ambient (1)  
RӨJA  
PPP  
PD  
80  
oC/W  
W
Peak Pulse Power Dissipation (2)  
10/1000us  
15,000  
Steady-State Power Dissipation @ TL = 30 ºC 3/8 inch  
(10 mm) from body  
6
W
1.56 (1)  
Unidirectional  
Bidirectional  
< 100  
< 5  
ps  
ns  
tclamping (0 volts to V(  
min, theoretical)  
BR)  
Surge Peak Forward Current (3)  
Solder Temperature @ 10 s  
IFSM  
200  
260  
A
oC  
Notes: 1. When mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm.  
2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figures 1 and 2).  
3. At 8.3 ms half-sine wave for unidirectional devices only.  
MECHANICAL and PACKAGING  
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.  
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026.  
MARKING: Part number.  
POLARITY: Cathode indicated by band. No cathode band on bidirectional devices.  
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.  
WEIGHT: Approximately 1.4 grams.  
See Package Dimensions on last page.  
PART NOMENCLATURE  
M 15 K  
P
22  
C
A (e3)  
Reliability Level*  
RoHS Compliance  
M
MA  
MX  
e3 = RoHS compliant  
Blank = non-RoHS compliant  
MXL  
Voltage Tolerance  
(*see Hirel Non-Hermetic  
Product Portfolio)  
A = 5% tolerance level  
Polarity  
C = Bi-directional  
Blank = Unidirectional  
Peak Pulse Power  
Kilowatt Rating  
Stand-off Voltage Rating  
(see Electrical Characteristics  
table)  
Encapsulated Plastic  
Package  
RF01011, Rev. E (01/12/16)  
©2016 Microsemi Corporation  
Page 2 of 7  
M15KP22A – M15KP280CA(e3)  
SYMBOLS & DEFINITIONS  
Symbol  
Definition  
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in  
temperature that caused it expressed in %/°C or mV/°C.  
V(BR)  
Breakdown Current: The current used for measuring Breakdown Voltage V(BR)  
Standby Current: The current through the device at rated stand-off voltage.  
.
I(BR)  
ID  
Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all  
repetitive transients (ref JESD282-B).  
IFSM  
Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse  
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an  
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.  
IPP  
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The  
impulse power is the maximum-rated value of the product of IPP and VC.  
PPP  
V(BR)  
VC  
Breakdown Voltage: The voltage across the device at a specified current I(BR) in the breakdown region.  
Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an  
impulse current (IPP) for a specified waveform.  
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that  
may be continuously applied over the standard operating temperature.  
VWM  
RF01011, Rev. E (01/12/16)  
©2016 Microsemi Corporation  
Page 3 of 7  
M15KP22A – M15KP280CA(e3)  
ELECTRICAL CHARACTERISTICS @ 25 ºC  
MAXIMUM  
TEMPERATURE  
COEFFICIENT OF  
V(BR)  
REVERSE  
STAND-  
OFF  
VOLTAGE  
VWM  
(Note 1)  
MINIMUM  
BREAKDOWN  
VOLTAGE  
MAXIMUM  
CLAMPING  
VOLTAGE  
VC @ IPP  
MAXIMUM  
STANDBY  
CURRENT  
MAXIMUM  
PEAK PULSE  
CURRENT  
IPP  
V(BR) @ I(BR)  
PART NUMBER  
ID @ VWM  
(FIG. 2)  
αV(BR)  
V
22  
24  
26  
28  
30  
33  
36  
40  
43  
45  
48  
51  
54  
58  
60  
64  
V
24.4  
mA  
V
A
mV/ºC  
24  
27  
29  
31  
34  
38  
41  
46  
50  
52  
56  
60  
63  
68  
71  
76  
A  
500  
150  
50  
25  
15  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
M15KP22A  
M15KP24A  
M15KP26A  
M15KP28A  
M15KP30A  
M15KP33A  
M15KP36A  
M15KP40A  
M15KP43A  
M15KP45A  
M15KP48A  
M15KP51A  
M15KP54A  
M15KP58A  
M15KP60A  
M15KP64A  
M15KP70A  
M15KP75A  
M15KP78A  
M15KP85A  
M15KP90A  
M15KP100A  
M15KP110A  
M15KP120A  
M15KP130A  
M15KP150A  
M15KP160A  
M15KP170A  
M15KP180A  
M15KP200A  
M15KP220A  
37.1  
40.7  
44.0  
47.5  
50.7  
54.8  
59.7  
65.8  
69.7  
73.0  
77.7  
82.8  
87.5  
94.0  
97.3  
104  
114  
122  
126  
137  
146  
162  
178  
193  
209  
243  
259  
275  
291  
322  
356  
388  
419  
452  
404  
369  
341  
316  
296  
274  
251  
228  
215  
205  
193  
181  
171  
160  
154  
144  
132  
123  
119  
109  
103  
93  
84  
78  
72  
62  
58  
55  
52  
47  
42  
39  
36  
33  
10  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
26.7  
28.9  
31.1  
33.3  
36.7  
40.0  
44.4  
47.8  
50.0  
53.3  
56.7  
60.0  
64.4  
66.7  
71.1  
77.8  
83.3  
86.7  
94.4  
100  
111  
122  
133  
144  
167  
178  
189  
200  
222  
245  
267  
289  
311  
70  
75  
78  
85  
83  
89  
93  
102  
109  
121  
133  
145  
157  
183  
195  
207  
219  
243  
269  
293  
317  
342  
90  
100  
110  
120  
130  
150  
160  
170  
180  
200  
220  
240  
260  
280  
M15KP240A  
M15KP260A  
M15KP280A  
** Consult factory for availability of the 17 and 18 Volt devices on a special order basis.  
NOTES:  
1. Transient Voltage Suppressors are normally selected with reverse “stand-off voltage” (VWM) which should be equal to or greater than the  
dc or continuous peak operating voltage level.  
RF01011, Rev. E (01/12/16)  
©2016 Microsemi Corporation  
Page 4 of 7  
M15KP22A – M15KP280CA(e3)  
GRAPHS  
Waveform Non-Repetitive  
td – Pulse Width  
FIGURE 1  
Peak Pulse Power Rating Curve  
t – Time – ms  
Test waveform parameters: tr=10 µs, tp=1000 µs  
FIGURE 2  
Pulse Waveform for 10/1000 µs Exponential Surge  
GRAPHS (continued)  
RF01011, Rev. E (01/12/16)  
©2016 Microsemi Corporation  
Page 5 of 7  
M15KP22A – M15KP280CA(e3)  
V(BR) – Reverse Breakdown Voltage (V)  
FIGURE 3  
Typical Junction Capacitance  
NOTE: For bidirectional construction, capacitance will be one-half that shown.  
Lead or Ambient Temperature °C  
FIGURE 4  
Derating Curve  
RF01011, Rev. E (01/12/16)  
©2016 Microsemi Corporation  
Page 6 of 7  
M15KP22A – M15KP280CA(e3)  
PACKAGE DIMENSIONS  
Dimensions  
Millimeters  
Dim  
Inch  
Max  
1.100 1.500 27.95  
Min  
Min  
Max  
38.1  
9.52  
6.35  
1.32  
LL  
BL  
BD  
LD  
0.365 0.375  
0.240 0.250  
0.048 0.052  
9.27  
6.1  
1.22  
RF01011, Rev. E (01/12/16)  
©2016 Microsemi Corporation  
Page 7 of 7  

相关型号：

M15KP60CA/TR

 Trans Voltage Suppressor Diode, 15000W, 60V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP60CAE3

 Trans Voltage Suppressor Diode, 15000W, 60V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, ROHS COMPLIANT, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP60CAE3/TR

 Trans Voltage Suppressor Diode, 15000W, 60V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, ROHS COMPLIANT, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP60CAE3TR

 15000W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-204AR, ROHS COMPLIANT, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP64A

 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
MICROSEMI

M15KP64A/TR

 Trans Voltage Suppressor Diode, 15000W, 64V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP64AE3

 Trans Voltage Suppressor Diode, 15000W, 64V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AR, ROHS COMPLIANT, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP64AE3/TR

 Trans Voltage Suppressor Diode, 15000W, 64V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AR, ROHS COMPLIANT, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP64AE3TR

 15000W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AR, ROHS COMPLIANT, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP64ATR

 15000W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AR, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP64CA

 Trans Voltage Suppressor Diode, 15000W, 64V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN
MICROSEMI

M15KP64CA/TR

 Trans Voltage Suppressor Diode, 15000W, 64V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN
MICROSEMI
©2020 ICPDF网 联系我们和版权申明