AAP200BS-M4A-G-LF-TR [MICROSEMI]
Consumer Circuit;
| 型号： | AAP200BS-M4A-G-LF-TR |
| 厂家： | 
Microsemi |
| 描述： | Consumer Circuit 商用集成电路 |
| 文件： | 总7页 (文件大小：201K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Portable Electronics AAP200X
AAP200X
PRELIMINARY DATA
ECM Microphone Pre-Amplifier
DESCRIPTION
The AAP200C is part of AAI’s new family of specialty
products for Portable Electronics applications, in this
case aimed at two terminal ECMs requiring integrated
pre-amplifiers. The AAP200X ECM pre-amplifiers
offer ultra low noise, require low current and feature
ultra low input capacitance.
FEATURES
•
•
•
Multiple gain options:
The AAP200X family will be offered in a chip scale
SMD package. The package size is a tiny 630µm x
530µm, and its height is 350µm including solder
bumps.
¬ 16dB
¬ 19dB
Multiple output voltage options
¬ 1.25V
¬ 1.33V
The AAP200X is offered in a chip scale SMD package
with a size and aspect ratio (630µm x 530µm) that is
optimum for the smallest (2mm dia.) microphones.
The lead free solder pads are nominally 110µm dia.
The AAP200X is supplied in tape and reel packaging.
Low quiescent current, 200µA typical
(VDD=1.8V, RL=2.2kΩ)
Low noise performance
Low input capacitance, 0.35uA typical
•
•
•
< 0.5% THD typical for output swing = 250mV
peak to peak.
The AAP200X family has multiple operating voltage
and gain options available, where the ‘X’ suffix
designates the gain value. The following options
available are:
•
•
Small die size: 630µm x 530µm
Suitable for small microphones down to 2mm
diameter
• AAP200A: Gain = 16dB Vop = 1.25V
• AAP200B: Gain = 19dB Vop = 1.25V
• AAP200C Gain = 16dB Vop = 1.33V
• AAP200D Gain = 19dB Vop = 1.33V
PIN CONFIGURATION: 4-Lead Micro SMD
© Copyright 2009- ASIC Advantage, Inc. – AADS00017/R135b - Preliminary - rev.3 - Oct 2009
1 / 7
Portable Electronics AAP200X
Functional Block Diagram
Typical Test Conditions
RL
2.2k
MICAMP
2V
Cmic
5pF
C2
IN
o
OUT
o
OUT
100nF
400k
GND
o
© Copyright 2009- ASIC Advantage, Inc. – AADS00017/R135b - Preliminary - rev.3 - Oct 2009
2 / 7
Portable Electronics AAP200X
MAXIMUM RATINGS
PARAMETER
SYMBOL
PARAMETERS
UNITS
CONDITIONS
MIN.
MAX.
Applied Voltage (all pins)
Supply Voltage
-0.5
2
V
V
Max voltage between pin and GND
VDD
IDD
-
(IDDMAX * RL) + Vop
2
Supply Current
mA
Vesd,out
Vesd
2500
2000
-40
OUT terminal
ESD
V
Other terminals
Operating Ambient Temp
Storage Temp Range
85
ºC
ºC
-40
100
Performance Operating
Temp Range
-5
55
ºC
ELECTRICAL CHARACTERISTICS
Unless otherwise stated: T=25ºC, VDD=1.8V, Vin=-44dBVrms, RL=2.2kΩ, F=1kHz, Cmic=5pF
PARAMETER
SYMBOL
PARAMETERS
UNITS
CONDITIONS
MIN
TYP
MAX
OPERATING SUPPLY
Quiescent Output (option A & B)
Vop
Vop
1.2
1.3
1.25
1.33
250
200
60
1.3
1.4
V
Quiescent Output (option C & D)
Supply Current (option A & B)
Supply Current (option C & D)
V
IDD
IDD
µA
µA
dB
PSRR
AC CHARACTERISTICS
Transfer Function (option A & C)
TF
16
16.5
19.5
17
dB
Source impedance = 500Ω
Transfer Function (option B & D)
Gain Variation over Temp
Lower 3dB Frequency
TF
Δ Av
fLOW
18.5
20.5
0.1
dB
dB
Source impedance = 500Ω
-5ºC < T < 55ºC
20
Hz
Cc = 82nF, TF = 17dB
TF = 16dB
Upper 3dB Frequency
fHIGH
20
100
kHz
mVpp
mVpp
Overload Margin, input
Overload Margin, output
Vinmax
Voutmax
40
1% distortion, TF=19dB
1% distortion, TF=19dB
400
TF=19dB; Cmic shorted,
A-weighted values
Input Referred Noise
Input Referred Noise
en
en
2.6
3.0
µV RMS
µV RMS
TF=16dB; Cmic shorted,
A-weighted values
© Copyright 2009- ASIC Advantage, Inc. – AADS00017/R135b - Preliminary - rev.3 - Oct 2009
3 / 7
Portable Electronics AAP200X
PARAMETER
SYMBOL
PARAMETERS
UNITS
CONDITIONS
MIN
TYP
MAX
Total Harmonic Distortion
Input Capacitance
Input Impedance
THD
CIN
0.3
%
pF
GΩ
Ω
0.3
ZIN
10
Output Impedance
ZOUT
50
PIN DESCRIPTION
PIN
1
NAME
NC
DESCRIPTION
Not connected
2
OUT
GND
IN
Output. Also used for ‘phantom’ power supply input.
3
Ground
Input
4
APPLICATION
VDD Supply Voltage
The AAP200x is designed to use the output pin as the power supply input. This is referred to as the ‘phantom’ power
supply input to the OUT pin. A load resistor, RL, must be used in series with the VDD supply. Refer to the table below
for recommended RL values that correspond to various supply voltage ranges.
PARAMETER SYMBOL
VOLTAGE RANGE
UNITS RECOMMENDED RL
NOTES
MIN
TYP
MAX
1.5
1.6
2
V
V
V
V
RL=250Ω
RL=3.3kΩ
RL=2.2kΩ
RL=10kΩ
A & B versions only
1.8
1.6
3.5
2
1.8
5
5
Power Supply
VDD
3.6
10
Applies to all versions
Light Sensitivity
If your particular application has the possibility of the AAP200x being exposed to direct or indirect light, we recommend
the application of an opaque underfill to limit the devices exposure to light(on the solder bumped side). Light exposure
to the device may or may not have negative effects on the device performance (varies per application).
© Copyright 2009- ASIC Advantage, Inc. – AADS00017/R135b - Preliminary - rev.3 - Oct 2009
4 / 7
Portable Electronics AAP200X
ORDERING TABLE
Ordering PN
Description
Package
Packing Type
Packing Qty
ECM Pre‐Amp, 16dB Gain,
Vop = 1.25V
AAP200A S‐M4A‐G‐LF‐W
4‐Pin Micro SMD
Waffle Pack
TBD
ECM Pre‐Amp, 16dB Gain,
Vop = 1.25V
ECM Pre‐Amp, 19dB Gain,
Vop = 1.25V
ECM Pre‐Amp, 19dB Gain,
Vop = 1.25V
ECM Pre‐Amp, 16dB Gain,
Vop = 1.33V
ECM Pre‐Amp, 16dB Gain,
Vop = 1.33V
ECM Pre‐Amp, 19dB Gain,
Vop = 1.33V
ECM Pre‐Amp, 19dB Gain,
Vop = 1.33V
AAP200A S‐M4A‐G‐LF‐TR
AAP200B S‐M4A‐G‐LF‐W
AAP200B S‐M4A‐G‐LF‐TR
AAP200C S‐M4A‐G‐LF‐W
AAP200C S‐M4A‐G‐LF‐TR
AAP200D S‐M4A‐G‐LF‐W
AAP200D S‐M4A‐G‐LF‐TR
4‐Pin Micro SMD
4‐Pin Micro SMD
4‐Pin Micro SMD
4‐Pin Micro SMD
4‐Pin Micro SMD
4‐Pin Micro SMD
4‐Pin Micro SMD
T&R
Waffle Pack
T&R
3500
TBD
3500
TBD
Waffle Pack
T&R
3500
TBD
Waffle Pack
T&R
3500
PACKAGE DIMENSIONS
© Copyright 2009- ASIC Advantage, Inc. – AADS00017/R135b - Preliminary - rev.3 - Oct 2009
5 / 7
Portable Electronics AAP200X
TAPE AND REEL CONFIGURATION
© Copyright 2009- ASIC Advantage, Inc. – AADS00017/R135b - Preliminary - rev.3 - Oct 2009
6 / 7
Portable Electronics AAP200X
The following is a brief overview of certain terms and conditions of sale of product. For a full and complete copy of all the
General Terms and Conditions of Sale, visit our webpage http://www.asicadvantage.com/terms.htm.
LIMITED WARRANTY
The product is warranted that it will conform to the applicable specifications and be free of defects for one year. Buyer
is responsible for selection of, use of and results obtained from use of the product. Buyer indemnifies and holds ASIC
Advantage, Inc. harmless for claims arising out of the application of ASIC Advantage, Inc.’s products to Buyer’s
designs. Applications described herein or in any catalogs, advertisements or other documents are for illustrative
purposes only.
CRITICAL APPLICATIONS
Products are not authorized for use in critical applications including aerospace and life support applications. Use of
products in these applications is fully at the risk of the Buyer. Critical applications include any system or device whose
failure to perform can result in significant injury to the user.
LETHAL VOLTAGES
Lethal voltages could be present in the applications. Please comply with all applicable safety regulations.
INTELLECTUAL PROPERTY RIGHTS AND PROPRIETARY DATA
ASIC Advantage, Inc. retains all intellectual property rights in the products. Sale of products does not confer on Buyer
any license to the intellectual property. ASIC Advantage, Inc. reserves the right to make changes without notice to the
products at any time. Buyer agrees not to use or disclose ASIC Advantage Inc.’s proprietary information without written
consent.
TRADEMARKS AND PATENTS
- IN-PLUG® is a registered trademark of ASIC Advantage, Inc.
- AAI’s modified snubber network is patented under the US Patent # 6,233,165
PROTECTION FOR CUSTOM SOLUTIONS
When AAI accepts to design and manufacture products to Buyer’s designs or specifications, buyer has certain
obligations to provide defense in a suit or proceeding claiming infringement of a patent, copyright or trademark or for
misappropriation of use of any trade secrets or for unfair competition.
COMPLIANCE WITH LAWS
Buyer agrees that at all times it will comply with all applicable federal, state, municipal, and local laws, orders and
regulations. Buyer agrees to comply with all applicable restrictions on exports and re-exports including obtaining any
required U.S. Government license, authorization, or approval. Buyer shall pay any duties, levies, taxes, brokerage
fees, or customs fees imposed on the products.
TITLE AND DELIVERY
All shipments of goods shall be delivered ExWorks, Sunnyvale, CA, U.S.A. Title in the goods shall not pass to Buyer
until ASIC Advantage, Inc. has received in full all amounts owed by Buyer.
LATEST DATASHEET UPDATES
For the latest datasheet updates, visit our web page: http://www.asicadvantage.com.
WORLDWIDE REPRESENTATIVES
To access AAI’s list of worldwide representatives, visit our web page http://www.asicadvantage.com.
COPYRIGHTS
Copyrights and all other proprietary rights in the Content rests with ASIC Advantage Inc. (AAI) or its licensors. All
rights in the Content not expressly granted herein are reserved. Except as otherwise provided, the Content published
on this document may be reproduced or distributed in unmodified form for personal non-commercial use only. Any
other use of the Content, including without limitation distribution, reproduction, modification, display or transmission
without the prior written consent of AAI is strictly prohibited. All copyright and other proprietary notices shall be
retained on all reproductions.
ASIC Advantage INC.
1290-B Reamwood Ave, Sunnyvale California 94089, USA
Tel: (1) 408-541-8686 Fax: (1) 408-541-8675
Website: http://www.asicadvantage.com
© Copyright 2009- ASIC Advantage, Inc. – AADS00017/R135b - Preliminary - rev.3 - Oct 2009
7 / 7
相关型号：
©2020 ICPDF网 联系我们和版权申明