5KP18CTR [MICROSEMI]
Trans Voltage Suppressor Diode, 5000W, 18V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN;
| 型号： | 5KP18CTR |
| 厂家： | 
Microsemi |
| 描述： | Trans Voltage Suppressor Diode, 5000W, 18V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AR, PLASTIC, CASE 5A, 2 PIN 局域网 二极管 |
| 文件： | 总4页 (文件大小：196K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
5KP5.0 thru 5KP110A
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
These Microsemi 5 kW Transient Voltage Suppressors (TVSs) are designed
for applications requiring protection of voltage-sensitive electronic devices
that may be damaged by harsh or severe voltage transients including
lightning per IEC61000-4-5 and classes with various source impedances
described herein. This series is available in 5.0 to 110 volt standoff voltages
(VWM) in both unidirectional and bidirectional offered in two different package
designs for axial and radial configurations. Microsemi also offers numerous
other TVS products to meet higher and lower power demands and special
applications.
CASE 5A
(DO-204AR)
CASE
5R
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
Available in both Unidirectional and Bidirectional
• Protection from switching transients and induced RF
construction (Bidirectional with C or CA suffix)
• Protection from ESD, and EFT per IEC 61000-4-2
Available in both axial-leaded and radial packages
(include R prefix in part number for radial package
option shown in figure as “case 5R,” ie . R5KP5.0A,
R5KP28CA, 5KP110, etc.)
and IEC 61000-4-4
• Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1,2,3,4: 5KP5.0A to 5KP110A or CA
•
•
Selections for 5.0 to 110 volts standoff voltages (VWM)
Class 5: 5KP5.0A to 5KP110A or CA (short distance)
Suppresses transients up to 5000 watts @ 10/1000 µs
Class 5: 5KP5.0A to 5KP36A or CA (long distance)
and 34,000 watts @ 8/20 µs (see Figure 1)
• Secondary lightning protection per IEC61000-4-5
•
•
Fast response
with 12 Ohms source impedance:
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers.
Class 1 & 2: 5KP5.0A to 5KP110A or CA
Class 3: 5KP5.0A to 5KP78A or CA
Class 4: 5KP5.0A to 5KP40A or CA
• Secondary lightning protection per IEC61000-4-5
•
Moisture classification is Level 1 with no dry pack
with 2 Ohms source impedance:
required per IPC/JEDEC J-STD-020B
Class 2: 5KP5.0A to 5KP70A or CA
Class 3: 5KP5.0 to 5KP36A or CA
Class 4: 5KP5.0 to 5KP18A or CA
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
• Peak Pulse Power dissipation at 25ºC: 5000 watts at
•
•
CASE: Void-free transfer molded thermosetting
10/1000 µs (also see Figures 1, 2 and 3)
• Impulse repetition rate (duty factor): 0.05%
epoxy body meeting UL94V-0
TERMINALS: Tin-Lead plated readily solderable
per MIL-STD-750, method 2026
MARKING: Body marked with part number
• tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
•
•
• Operating and Storage temperature: -65ºC to +150ºC
POLARITY: Band denotes cathode. Bidirectional
• Thermal resistance: 20ºC/W junction to lead, or
80ºC/W junction to ambient when mounted on FR4 PC
board with 4 mm2 copper pads (1oz) and track width 1
mm, length 25 mm
not marked for polarity
•
•
WEIGHT: 1.5 grams.
TAPE & Reel: Standard per EIA-296 for axial
package (add “TR” suffix to part number)
• Steady-State Power dissipation: 6 watts at TL = 30oC,
or 1.56 watts at TA = 25ºC when mounted on FR4 PC
board described for thermal resistance
•
See package dimensions on last page
• Forward Surge Voltage: 3.5 V maximum @ 100 Amps
8.3 ms half-sine wave
• Solder temperatures: 260 ºC for 10 s (maximum)
Copyright 2002
6-09-2003 REV A
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5KP5.0 thru 5KP110A
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
ELECTRICAL CHARACTERISTICS
MAXIMUM
STANDBY
CURRENT
ID
MAXIMUM
TEMPERATURE
COEFFICIENT
VARIATION OF
V(BR)
MAXIMUM
CLAMPING
VOLTAGE
VC
MAXIMUM
PEAK PULSE
CURRENT
REVERSE
BREAKDOWN
STAND-OFF
VOLTAGE
VOLTAGE
VWM
MICROSEMI
PART
V(BR)
IPP (FIG. 3)
@ IPP
@ VWM
(Note 1)
NUMBER
α
V(BR
)
V(BR)
@
I(BR)
VOLTS
VOLTS
5.0
5.0
6.0
6.0
6.5
6.5
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
9.0
9.0
10
VOLTS
mA
50
50
50
50
50
50
50
50
5
µA
2000
2000
5000
5000
2000
2000
1000
1000
250
250
150
150
50
A
mV/ ºC
4.0
4.0
4.0
4.0
4.0
4.0
5.0
5.0
6.0
6.0
6.0
6.0
7.0
7.0
8.0
8.0
9.0
9.0
10
5KP5.0
5KP5.0A
5KP6.0
5KP6.0A
5KP6.5
5KP6.5A
5KP7.0
5KP7.0A
5KP7.5
5KP7.5A
5KP8.0
5KP8.0A
5KP8.5
5KP8.5A
5KP9.0
5KP9.0A
5KP10
6.40 – 7.30
6.40 – 7.00
6.67 – 8.15
6.67 – 7.37
7.22 – 8.82
7.22 – 7.98
7.78 – 9.51
7.78 – 8.60
8.33 – 10.2
8.33 – 9.21
8.89 – 10.9
8.89 – 9.83
9.44 – 11.5
9.44 – 10.4
10.0 – 12.2
10.0 – 11.1
11.1 – 13.6
11.1 – 12.3
12.2 – 14.9
12.2 – 13.5
13.3 – 16.3
13.3 – 14.7
14.4 – 17.6
14.4 – 15.9
15.6 – 19.1
15.6 – 17.2
16.7 – 20.4
16.7 – 18.5
17.8 – 21.8
17.8 – 19.7
18.9 – 23.1
18.9 – 20.9
20.0 – 24.4
20.0 – 22.1
22.2 – 27.1
22.2 – 24.5
24.4 – 29.8
24.4 – 26.9
26.7 – 32.6
26.7 – 29.5
28.9 – 35.3
28.9 – 31.9
31.1 – 38.0
31.1 – 34.4
33.3 – 40.7
33.3 – 36.8
36.7 – 44.9
36.7 – 40.6
40.0 – 48.9
40.0 – 44.2
44.4 – 54.3
44.4 – 49.1
47.8 – 58.4
47.8 – 52.8
50.0 – 61.1
50.0 – 55.3
53.3 – 65.1
53.3 – 58.9
56.7 – 69.3
56.7 – 62.7
9.6
520
543
439
485
407
447
378
417
350
388
333
367
314
347
295
325
266
294
249
274
227
251
210
232
194
215
188
206
176
192
164
181
155
172
139
154
127
141
116
128
107
119
99
9.2
11.4
10.3
12.3
11.2
13.3
12.0
14.3
12.9
15.0
13.6
15.9
14.4
16.9
15.4
18.8
17.0
20.1
18.2
22.0
19.9
23.8
21.5
25.8
23.2
26.9
24.4
28.8
26.0
30.5
27.6
32.2
29.2
35.8
32.4
39.4
35.5
43.0
38.9
46.6
42.1
50.1
45.5
53.5
48.4
59.0
53.3
64.3
58.1
71.4
64.5
46.7
69.4
80.3
72.7
85.5
77.4
91.1
82.4
5
5
5
5
5
50
5
20
5
20
5
15
5KP10A
5KP11
10
5
15
11
5
10
5KP11A
5KP12
11
5
10
10
12
5
10
11
5KP12A
5KP13
12
5
10
11
13
5
10
12
5KP13A
5KP14
13
5
10
12
14
5
10
13
5KP14A
5KP15
14
5
10
13
15
5
10
15
5KP15A
5KP16
15
5
10
15
16
5
10
18
5KP16A
5KP17
16
5
10
16
17
5
10
19
5KP17A
5KP18
17
5
10
18
18
5
10
20
5KP18A
5KP20
18
5
10
19
20
5
10
24
5KP20A
5KP22
20
5
10
22
22
5
10
27
5KP22A
5KP24
22
5
10
24
24
5
10
30
5KP24A
5KP26
24
5
10
27
26
5
10
33
5KP26A
5KP28
26
5
10
29
28
5
10
34
5KP28A
5KP30
28
5
10
110
93
30
30
5
10
38
5KP30A
5KP33
30
5
10
103
85
35
33
5
10
41
5KP33A
5KP36
33
5
10
94
38
36
5
10
78
45
5KP36A
5KP40
36
5
10
86
40
40
5
10
70
50
5KP40A
5KP43
40
5
10
78
45
43
5
10
65
54
5KP43A
5KP45
43
5
10
72
49
45
5
10
62
57
5KP45A
5KP48
45
5
10
69
51
48
5
10
58
62
5KP48A
5KP51
48
5
10
65
55
51
5
10
55
65
5KP51A
51
5
10
61
60
Copyright 2002
Microsemi
Page 2
6-09-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5KP5.0 thru 5KP110A
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
MAXIMUM
STANDBY
CURRENT
ID
MAXIMUM
TEMPERATURE
COEFFICIENT
VARIATION OF
V(BR)
MAXIMUM
CLAMPING
VOLTAGE
VC
MAXIMUM
PEAK PULSE
CURRENT
REVERSE
BREAKDOWN
VOLTAGE
V(BR)
STAND-OFF
VOLTAGE
VWM
MICROSEMI
PART
IPP (FIG. 3)
@ IPP
@ VWM
(Note 1)
NUMBER
α
V(BR
)
V(BR)
VOLTS
@
I(BR)
VOLTS
VOLTS
54
mA
5
µA
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
A
mV/ ºC
70
5KP54
60.0 – 73.3
60.0 – 66.3
64.4 – 78.7
64.4 – 71.2
66.7 – 81.5
66.7 – 73.7
71.1 – 86.9
71.1 – 78.6
77.8 – 95.1
77.8 – 86.0
83.3 – 102.0
83.3 – 92.1
86.7 – 106.0
86.7 – 95.8
94.4 – 115.0
94.4 – 104.0
100 – 122
96.3
87.1
103.0
93.6
107.0
96.8
114.0
103.0
125
52
57
49
53
47
52
44
49
40
44
37
41
36
40
33
36
31
34
28
31
26
5KP54A
5KP58
54
5
64
58
5
77
5KP58A
5KP60
58
5
69
60
5
79
5KP60A
5KP64
60
5
70
64
5
85
5KP64A
5KP70
64
5
75
70
5
93
5KP70A
5KP75
70
5
113
84
75
5
134
100
90
5KP75A
5KP78
75
5
121
78
5
139
104
94
5KP78A
5KP85
78
5
126
85
5
151
113
102
120
109
134
122
147
132
5KP85A
5KP90
85
5
137
90
5
160
5KP90A
5KP100
5KP100A
5KP110
5KP110A
90
100 – 111
5
146
100
100
110
110
111 – 136
5
179
111 – 123
5
162
122 – 149
5
196
NOTE 1: Transient Voltage Suppressors are nor5mally selec1te77d with reverse “Stand Off Vo2lt8age” VWM which should
be equal to or greater than the dc or continuous peak operating voltage level.
122 - 135
NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number.
SYMBOLS & DEFINITIONS
Symbol
VWM
PPP
Definition
Working Peak (Standoff) Voltage
Peak Pulse Power
Symbol
Definition
IPP
VC
Peak Pulse Current
Clamping Voltage
V(BR)
ID
Breakdown Voltage
I(BR)
Breakdown Current for V(BR)
Standby Current
Copyright 2002
Microsemi
Page 3
6-09-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5KP5.0 thru 5KP110A
5000 W TRANSIENT VOLTAGE
SUPPRESSOR
S C O T T S D A L E D I V I S I O N
GRAPHS
Test waveform parameters: tr=10 µs, tp=1000 µs
FIGURE 2
tp –FPIuGlsUe TRimEe1– sec
Peak Pulse Power vs. Pulse Time to 50% of
Exponentially Decaying Pulse
Pulse Waveform
PACKAGE DIMENSIONS
CASE 5A
CASE 5R
NOTE: Dimensions are in inches.
V(BR) Breakdown Voltage - Volts
FIGURE 3
Typical Capacitance vs
Breakdown Voltage
Copyright 2002
Microsemi
Page 4
6-09-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关型号：
5KP18T
Trans Voltage Suppressor Diode, 5000W, 18V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE P600, 2 PIN
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明