5962-8855401YA [MICROSEMI]
Fixed Positive Standard Regulator, 24VCQCC20,;
| 型号： | 5962-8855401YA |
| 厂家： | 
Microsemi |
| 描述： | Fixed Positive Standard Regulator, 24VCQCC20, 输出元件 调节器 |
| 文件： | 总12页 (文件大小：150K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISIONS
LTR
DESCRIPTION
DATE (YR-MO-DA)
APPROVED
A
B
Changes in accordance with NOR 5962-R266-92.
92-09-18
01-07-20
M. A. FRYE
R. MONNIN
Changed title block to reflect correct nomenclature. Updated boiler plate to
meet current requirements. -lgt
C
D
06-04-25
13-01-16
R. MONNIN
C. SAFFLE
Update drawing as part of 5 year review. -rrp
Update drawing to reflect latest changes in format and requirements. -rrp
THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
SHEET
REV STATUS
OF SHEETS
PMIC N/A
REV
D
1
D
2
D
3
D
4
D
5
D
6
D
7
D
8
D
9
D
D
SHEET
10
11
PREPARED BY
JOSEPH A. KERBY
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil
STANDARD
MICROCIRCUIT
DRAWING
CHECKED BY
CHARLES E. BESORE
APPROVED BY
MICHAEL A. FRYE
THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE
MICROCIRCUIT, LINEAR, POSITIVE
REGULATOR, FIXED 24 VOLT, MONOLITHIC
SILICON
DRAWING APPROVAL DATE
90-05-24
REVISION LEVEL
D
SIZE
A
CAGE CODE
AMSC N/A
5962-88554
67268
SHEET
1 OF 11
DSCC FORM 2233
APR 97
5962-E198-13
1. SCOPE
1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in
accordance with MIL-PRF-38535, appendix A.
1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example:
5962-88554
01
X
A
Drawing number
Device type
(see 1.2.1)
Case outline
(see 1.2.2)
Lead finish
(see 1.2.3)
1.2.1 Device type(s). The device type(s) identify the circuit function as follows:
Device type
01
Generic number
7824A
Circuit function
1.0 A positive regulator, fixed 24-volt
1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter
Descriptive designator
Terminals
Package style
X
Y
Z
See figure 1
See figure 1
See figure 1
3
2
2
Can (Similar to TO-39)
Can (Similar to TO-3)
Can (Similar to TO-66)
1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A.
1.3 Absolute maximum ratings.
Supply voltage range
Operating or output shorted to ground................................................ 40 V dc
Transient............................................................................................. 50 V dc 1/
Storage temperature range........................................................................ -65°C to +150°C
Lead temperature (soldering, 10 seconds)................................................. +300°C
Power dissipation (PD):
TC = +25°C:
Case X......................................................................................... 2 W
Case Y......................................................................................... 20 W
Case Z......................................................................................... 15 W
TA = +25°C:
Case X......................................................................................... 1 W
Case Y......................................................................................... 4.3 W
Case Z......................................................................................... 15 W
Thermal resistance, junction-to-case (θJC):
Case X......................................................................................... 15°C/W
Case Y......................................................................................... 3°C/W
Case Z......................................................................................... 6°C/W
1/ The 50-volt input rating refers to the ability of the regulator to withstand high line or transient condition without damage.
Since the regulator’s maximum current capability is reduced, the output may fall out of regulation at high input voltage under
nominal loading.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
2
DSCC FORM 2234
APR 97
1.3 Absolute maximum ratings - Continued.
Thermal resistance, junction-to-ambient (θJA):
Case X .................................................................................................... 120°C/W
Case Y .................................................................................................... 35°C/W
Case Z .................................................................................................... 50°C/W
Junction-to-ambient (TJ) ............................................................................... +150° 2/
1.4 Recommended operating conditions.
Ambient operating temperature range (TA) ................................................ -55°C to +125°C
Input voltage range .................................................................................... 28 V dc to 38 V dc
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883
-
Test Method Standard Microcircuits.
MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-103 - List of Standard Microcircuit Drawings.
MIL-HDBK-780 - Standard Microcircuit Drawings.
(Copies of these documents are available online at https://assist.dla.mil/quicksearch/ or from the Standardization Document
Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text
of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3. REQUIREMENTS
3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-
JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer
Listing (QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-
PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying
activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan
may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device.
These modifications shall not affect the PIN as described herein. A "Q" or "QML" certification mark in accordance with MIL-
PRF-38535 is required to identify when the QML flow option is used.
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified
in MIL-PRF-38535, appendix A and herein.
3.2.1 Case outline. The case outline shall be in accordance with 1.2.2 herein and figure 1.
3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.
2/ The device is protected by a thermal shutdown circuit which is designed to turn off the output transistor whenever the
device junction temperature is in excess of 150°C.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
3
DSCC FORM 2234
APR 97
TABLE I. Electrical performance characteristics.
Conditions 1/
-55°C ≤ TA ≤ +125°C
Test
Symbol
Group A
subgroups
Device
type
Limits
Max
Unit
unless otherwise specified
Min
23.6
23.3
VOUT
Output voltage
1
2, 3
1
01
01
24.4
24.7
120
240
60
V
TA = +25°C
VIN = 28 V to 38 V 2/
Line regulation 3/ 4/
VRLINE
V
IN = 27 V
mV
to 38 V
2, 3
1
V
IN = 30 V
to 36 V
2, 3
1
120
160
320
80
VRLOAD
IO = 5.0 mA
to 1.5 A
Load regulation 3/
01
mV
5/
2, 3
1
IO = 250 mA
to 750 mA 5/
2, 3
1
160
80
IO = 5 mA
to 500 mA 6/
2, 3
1
160
6.0
ISCD
Standby current drain
01
mA
2, 3
1, 2, 3
7.0
V
IN = 28 V to 38 V
Standby current drain
change with line
01
01
01
0.8
mA
mA
V
∆ISCD(LINE)
∆ISCD(Load)
VDO
IO = 5.0 mA to 1000 mA
Standby current drain
change with load
1, 2, 3
1, 2, 3
0.5
IO = 1.0 A
5/
Dropout voltage
2.5
2.5
3.3
1.7
1.2
∆VOUT
100 mV
=
IO = 500 mA 6/
IO(PK)
IOS
TA =
+25°C
Peak output current
5/
6/
5/
1
1
01
01
1.5
0.5
A
A
VIN = 35 V
Short circuit current
7/
2, 3
1
2.8
0.7
2.0
6/
2, 3
See footnotes at end of table.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
4
DSCC FORM 2234
APR 97
TABLE I. Electrical performance characteristics - Continued.
Conditions 1/
-55°C ≤ TA ≤ +125°C
Test
Symbol
Group A
subgroups
Device
type
Limits
Unit
dB
unless otherwise specified
Min
56
Max
Ripple rejection
4
7
7
01
01
01
TA = +25°C, f = 120 Hz,
∆VIN = 10 V
∆VIN
∆VOUT
NO
Output noise voltage
8/
40
TA = +25°C,
µV
V
rms
f = 10 Hz to 100 kHz
TA = +25°C,
Long term stability
8/
151
mV
∆VOUT
∆t
T = 1000 hours
1/ Unless otherwise specified, VIN = 33 V and IO = 500 mA for cases Y and Z, VIN = 33 V and IO = 100 mA for case X.
Maximum test current for case X is 500 mA.
2/ For case X: IO = 5 mA to 500 mA, P ≤ 2 W. For case Y: IO = 5 mA to 1.0 A, P ≤ 20 W.
For case Y: IO = 5 mA to 1.0 A, P ≤ 15 W.
3/ Measurements are made at constant junction temperature and with low duty cycle.
4/ Minimum load current for full line regulation is 5.0 mA.
5/ For cases Y and Z only.
6/ For case X only.
7/ Short circuit protection is only assured up to VIN = 35 V.
8/ Guaranteed if not tested.
3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are
as specified in table I and shall apply over the full ambient operating temperature range.
3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical
tests for each subgroup are described in table I.
3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN
listed in 1.2 herein. In addition, the manufacturer's PIN may also be marked. In addition, the manufacturer's PIN may also be
marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer
has the option of not marking the "5962-" on the device.
3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance
to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a "Q" or "QML" certification mark in
accordance with MIL-PRF-38535 to identify when the QML flow option is used.
3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an
approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DLA Land and
Maritime -VA prior to listing as an approved source of supply shall affirm that the manufacturer's product meets the
requirements of MIL-PRF-38535, appendix A and the requirements herein.
3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided
with each lot of microcircuits delivered to this drawing.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
5
DSCC FORM 2234
APR 97
Case outline X
Symbol
Inches
Millimeters
Min
.165
-----
.016
.016
.335
.305
Max
.185
.100
.019
.021
.370
.335
Min
4.19
-----
0.41
0.41
8.51
7.75
Max
4.70
2.54
0.48
0.53
9.40
8.51
A
A1
φb
φb1
φD
φD1
e
e1
F
k
k1
k2
L
L1
L2
α
.200 BSC
.100 BSC
5.08 BSC
2.54 BSC
---
.050
.034
.045
.041
---
---
0.71
0.74
0.23
12.70
---
1.27
0.86
1.14
1.04
---
.028
.029
.009
.500
---
.050
---
1.27
---
.250
6.35
45°
45°
NOTE:
The U.S. government preferred system of measurement is the metric SI system. However, since this item was
originally designed using inch-pound units of measurement, in the event of conflict between the metric and
inch-pound units, the inch-pound units shall take precedence.
FIGURE 1. Case outlines.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
6
DSCC FORM 2234
APR 97
Case outline Y
Symbol
Inches
Millimeters
Min
.250
1.177
.038
---
.655
.420
.205
.060
.131
.312
---
Max
.450
1.197
.043
.875
.675
.440
.225
.135
.188
.500
.050
.525
.161
Min
6.35
29.90
0.97
---
16.64
10.67
5.21
1.52
3.84
7.92
---
Max
11.35
30.40
1.09
22.22
17.74
11.16
5.72
3.43
4.09
12.70
1.27
13.34
4.78
A
A1
φb
φD
e
e1
e2
F
φH
L
L1
R
.495
.151
12.57
3.33
R1
NOTE:
The U.S. government preferred system of measurement is the metric SI system. However, since this item was
originally designed using inch-pound units of measurement, in the event of conflict between the metric and
inch-pound units, the inch-pound units shall take precedence.
FIGURE 1. Case outline – Continued.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
7
DSCC FORM 2234
APR 97
Case outline Z
Symbol
Inches
Millimeters
Min
.250
.958
.028
---
.570
.190
.093
.050
.142
.360
---
Max
.340
.962
.034
.620
.590
.210
.107
.075
.152
---
Min
6.35
24.33
0.97
---
14.48
4.83
2.36
1.27
3.61
9.14
---
Max
8.64
24.43
1.09
15.75
14.99
5.33
2.72
1.91
3.86
---
A
A1
φb
φD
e
e1
e2
F
φH
L
R
.350
.145
8.89
3.68
R1
---
NOTE:
The U.S. government preferred system of measurement is the metric SI system. However, since this item was
originally designed using inch-pound units of measurement, in the event of conflict between the metric and
inch-pound units, the inch-pound units shall take precedence.
FIGURE 1. Case outline – Continued.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
8
DSCC FORM 2234
APR 97
NOTE:
1. These are the “bottom view” of the can packages.
FIGURE 2. Terminal connections.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
9
DSCC FORM 2234
APR 97
3.8 Notification of change. Notification of change to DLA Land and Maritime -VA shall be required for any change that
affects this drawing.
3.9 Verification and review. DLA Land and Maritime, DLA Land and Maritime's agent, and the acquiring activity retain the
option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be made
available onshore at the option of the reviewer.
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535,
appendix A.
4.2 Screening. Screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices
prior to quality conformance inspection. The following additional criteria shall apply:
a. Burn-in test, method 1015 of MIL-STD-883.
(1) Test condition C or D. The test circuit shall be maintained by the manufacturer under document revision level
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify
the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method
1015 of MIL-STD-883.
(2) TA = +125°C, minimum.
b. Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter
tests prior to burn-in are optional at the discretion of the manufacturer.
4.3 Quality conformance inspection. Quality conformance inspection shall be in accordance with method 5005 of MIL-STD-
883 including groups A, B, C, and D inspections. The following additional criteria shall apply.
4.3.1 Group A inspection.
a. Tests shall be as specified in table II herein.
b. Subgroups 5, 6, 8, 9, 10, and 11 in table I, method 5005 of MIL-STD-883 shall be omitted.
4.3.2 Groups C and D inspections.
a. End-point electrical parameters shall be as specified in table II herein.
b. Steady-state life test conditions, method 1005 of MIL-STD-883.
(1) Test condition C or D. The test circuit shall be maintained by the manufacturer under document revision level
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall
specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in
method 1005 of MIL-STD-883.
(2) TA = +125°C, minimum.
(3) Test duration: 1,000 hours, except as permitted by method 1005 of MIL-STD-883.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
10
DSCC FORM 2234
APR 97
TABLE II. Electrical test requirements.
MIL-STD-883 test requirements
Subgroups
(in accordance with
MIL-STD-883, method 5005,
table I)
Interim electrical parameters
(method 5004)
1
Final electrical test parameters
(method 5004)
1*,2,3,4,7
1*,2,3,4,7
1
Group A test requirements
(method 5005)
Groups C and D end-point
electrical parameters
(method 5005)
* PDA applies to subgroup 1.
5. PACKAGING
5.1 Packaging requirements. The requirements for packaging shall be in accordance with MIL-PRF-38535, appendix A.
6. NOTES
6.1 Intended use. Microcircuits conforming to this drawing are intended for use for Government microcircuit applications
(original equipment), design applications, and logistics purposes.
6.2 Replaceability. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-
prepared specification or drawing.
6.3 Configuration control of SMD's. All proposed changes to existing SMD's will be coordinated with the users of record for
the individual documents. This coordination will be accomplished using DD Form 1692, Engineering Change Proposal.
6.4 Record of users. Military and industrial users shall inform DLA Land and Maritime when a system application requires
configuration control and the applicable SMD to that system. DLA Land and Maritime will maintain a record of users and this
list will be used for coordination and distribution of changes to the drawings. Users of drawings covering microelectronics
devices (FSC 5962) should contact DLA Land and Maritime -VA, telephone (614) 692-8108.
6.5 Comments. Comments on this drawing should be directed to DLA Land and Maritime -VA, Columbus, Ohio 43218-
3990, or telephone (614) 692-0540.
6.6 Approved sources of supply. Approved sources of supply are listed in MIL-HDBK-103 and QML-38535. The vendors
listed in MIL-HDBK-103 and QML-38535 have agreed to this drawing and a certificate of compliance (see 3.6 herein) has been
submitted to and accepted by DLA Land and Maritime -VA.
SIZE
STANDARD
5962-88554
A
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
REVISION LEVEL
D
SHEET
COLUMBUS, OHIO 43218-3990
11
DSCC FORM 2234
APR 97
STANDARD MICROCIRCUIT DRAWING BULLETIN
DATE: 13-01-16
Approved sources of supply for SMD 5962-88554 are listed below for immediate acquisition information only and
shall be added to MIL-HDBK-103 and QML-38535 during the next revision. MIL-HDBK-103 and QML-38535 will be
revised to include the addition or deletion of sources. The vendors listed below have agreed to this drawing and a
certificate of compliance has been submitted to and accepted by DLA Land and Maritime -VA. This information
bulletin is superseded by the next dated revision of MIL-HDBK-103 and QML-38535. DLA Land and Maritime
maintains an online database of all current sources of supply at http://www.landandmaritime.dla.mil/Programs/Smcr/.
Standard
microcircuit drawing
PIN 1/
Vendor
CAGE
number
Vendor
similar
PIN 2/
5962-8855401XA
5962-8855401YA
5962-8855401ZA
34333
34333
34333
SG7824AT/883B
SG7824AK/883B
SG7824AR/883B
1/ The lead finish shown for each PIN representing
a hermetic package is the most readily available
from the manufacturer listed for that part. If the
desired lead finish is not listed contact the vendor
to determine its availability.
2/ Caution. Do not use this number for item
acquisition. Items acquired to this number may not
satisfy the performance requirements of this drawing.
Vendor CAGE
number
Vendor name
and address
34333
Microsemi Analog Mixed Signal Group
11861 Western Ave
Garden Grove, CA 92841-2119
The information contained herein is disseminated for convenience only and the
Government assumes no liability whatsoever for any inaccuracies in the
information bulletin.
相关型号：
5962-8855701FA
Parallel In Parallel Out, 10K Series, 4-Bit, Bidirectional, True Output, ECL, CDFP16, CERAMIC, FP-16
MOTOROLA
©2020 ICPDF网 联系我们和版权申明