IA-XS-1W [MICRODC]
FIXED INPUT,ISOLATED & REGULATED Dual Output DC/DC Converters; 定电压输入,隔离稳压双输出DC / DC转换器![IA-XS-1W](http://pdffile.icpdf.com/pdf1/p00183/img/icpdf/IA-XS-_1038322_icpdf.jpg)
型号: | IA-XS-1W |
厂家: | ![]() |
描述: | FIXED INPUT,ISOLATED & REGULATED Dual Output DC/DC Converters |
文件: | 总2页 (文件大小:671K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IA-XS-1W Series
FIXED INPUT,ISOLATED & REGULATED Dual Output DC/DC Converters
SELECTION GUIDE
Input
Output
Max
Switching
Frequency
(KHz,Typ)
Efficiency
(%,Typ)
Voltage(VDC)
Voltage
(VDC)
Current
Order code
Nominal
Range
Min
IA0503XS-1W
IA0505XS-1W
IA0509XS-1W
IA0512XS-1W
IA0515XS-1W
IA1203XS-1W
IA1205XS-1W
IA1209XS-1W
IA1212XS-1W
IA1215XS-1W
IA2403XS-1W
IA2405XS-1W
IA2409XS-1W
IA2412XS-1W
IA2415XS-1W
5
4.75-5.25
4.75-5.25
4.75-5.25
4.75-5.25
4.75-5.25
11.4-12.6
11.4-12.6
11.4-12.6
11.4-12.6
11.4-12.6
22.8-25.2
22.8-25.2
22.8-25.2
22.8-25.2
22.8-25.2
±3.3
±5
±100
±100
±56
±10
±10
±6
69
54
63
63
65
72
56
62
65
86
72
54
62
64
66
83
83
5
5
±9
83
FEATURES
◆RoHS compliant
5
±12
±15
±3.3
±5
±42
±5
83
5
±33
±4
250
100
83
12
12
12
12
12
24
24
24
24
24
±100
±100
±56
±10
±10
±6
◆Efficiency up to 86%
◆SIP Package
±9
83
±12
±15
±3.3
±5
±42
±5
83
◆Wide temperature performance at full
1 Watt load,-40°C to 85°C
◆UL 94V-0 package material
◆No heatsink required
±33
±4
83
±100
±100
±56
±10
±10
±6
83
83
±9
83
±12
±15
±42
±5
83
±33
±4
300
◆Small footprint
◆Industry standard pinout
◆Power sharing on output
◆1KVDC isolation
◆5V,12V and 24V input
◆3.3V,5V,9V,12V and 15V output
◆Internal SMD construction
ISOLATION SPECIFICATIONS
Parameter
Test conditions
Min.
1000
1000
Typ.
Max
Units
VDC
MΩ
◆Fully encapsulated with toroidal Magnetics
◆No external components required
Isolation test voltage
Isolation resistance
Flash tested for 1 minute and 1mA max
Test at Viso=500VDC
◆MTTF up to 1.5 million hours
MODEL SELECTION
⑥
①
②
③
④
⑤
IA 05 05 X S -1W
①Product Series
③Output Voltage
⑤SIP Package
②Input Voltage
④Fixed Input
⑥Rated Power
OUTPUT SPECIFICATIONS
APPLICATIONS
The IA_XS-1W series are specially designed for applications
where a group of polar power supplies are isolated from the
input power supply in a distributed power supply system on a
circuit board.
Parameter
Output power
Test conditions
Min
0.
Typ.
Max.
Units
W
1
±0.25
±1
Line regulation
For Vin change of ±5%
10% to 100% full load
100% full load
%
Load regulation
Output voltage accuracy
Temperature drift
Output Ripple*
%
These products apply to:
1) where the voltage of the input power supply is fixed
(voltage variation ≤±5%);
±3
%
100% full load
0.03
20
%/°C
MV p-p
MV p-p
2) where isolation is necessary between input and output
(isolation voltage ≤1000VDC);
20MHz Bandwidth
20MHz Bandwidth
10
50
3) where the regulation of the output voltage and the output
ripple noise are demanded.
Output Noise*
100
* Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power
Converter section, application notes.
MICRODC reserves the copyright
http://www.microdc.cn
Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646
Page 1 of 2
IA-XS-1W Series
Recommended circuit
TEMPERATURE CHARACTERISTICS
If you want to further decrease the input/output ripple,
an "LC" filtering network may be connected to the
input and output ends of the DC/DC converter, see
(Figure 1).
Parameter
Conditions
Min.
Typ.
Max.
Units
Storage humidity range
Operating temperature
Storage temperature
Lead temperature
Temp.rise at full load
Cooling
95
85
%
°C
°C
°C
°C
-40
-55
125
300
30
1.5mm from case for 10 seconds
20
Free air convection
Plastic(UL94-V0)
Continuous
1
Case material
IA(XX)05XS-1W
Others*
Short circuit protection
S
K hours
g
It should also be noted that the inductance and the
frequency of the"LC"filtering network should be
staggered with the DC/DC frequency to avoid mutual
interference. However, the capacitance of the output
filter capacitor must be proper. If the capacitance is too
big, a startup problem might arise. For every channel of
output, provided the safe and reliable operation is
ensured, the greatest capacitance of its filter capacitor
sees (Table 1).
MTBF
3500
Weight
5.2
*Supply voltage must be discontinued at the end of short circuit duration.
TYPICAL CHARACTERISTICS
Temperature Derating Graph
EXTERNAL CAPACITOR TABLE (TABLE 1)
Cin
(μF)
4.7
Vout
(VDC)
±5
Cout
(μF)
4.7
Vin
(VDC)
5
12
2.2
±9
2.2
24
0.47
-
±12
±15
1
-
0.47
It's not recommend to connect any external capacitor in
the application field with less than 0.5 watt output.
Overload Protection
Under normal operating conditions, the output circuit of
These products has no protection against over-current
and short-circuits. The simplest method is to connect a
self-recovery fuse in series at the input end or add a
circuit breaker to the circuit.
OUTLINE DIMENSIONS & PIN CONNECTIONS
SIZE Graph
RECOMMENDED FOOTPRINT
Top view,grid:2.54mm(0.1inch)
diameter:1.00mm(0.039inch)
Input Over-voltage Protection Circuit
The simplest device for input over-voltage protection is
a linear voltage regulator with overheat protection that is
connected to the input end in series (Figure 2).
FOOTPRINT DETAILS
Pin
1
Function
VIN
When the environment temperature is higher than 71°C,
the product output power should be less then 60% of the
rated power.
2
GND
+V0
Note:
7
Unit:mm(inch)
No parallel connection or plug and play.
Pin section:0.50*0.3mm(0.020*0.012inch)
Pin section tolerances: 0.10mm( 0.004inch)
General tolerances: 0.25mm( 0.010inch)
9
-V0
10
0V
Use dual output simultaneously, forbid opening output
pin (0V) to use as single output.
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise
specified.Another 24V products, please inquire Our technical department!
Requirement on output load
To ensure this module can operate efficiently and reliably, During operation, the minimum output load is
not less than 10% of the full load, and that this product should never be operated under no load! If the
actual output power is very small, please connect a resistor with proper resistance at the output end in
parallel to increase the load.
RoHS COMPLIANT INFORMATION
This series is compatible with RoHS soldering systems with a peak wave solder temperature
of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin
with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this
series are backward compatible with Sn/Pb soldering systems.
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646 E-mail:tech@microdc.cn
Website:http://www.microdc.cn
REACH COMPLIANT INFORMATION
This series has proven that this product does not contain harmful chemicals, it also has
harmful chemical substances through the registration, inspection and approval.
http://www.microdc.cn
Technical Enquiries-Email:tech@microdc.cn Tel:0086-20-86000646
Page 2 of 2
相关型号:
©2020 ICPDF网 联系我们和版权申明