TC911BCPA [MICROCHIP]
Monolithic Auto-Zeroed Operational Amplifers; 单片自动调零运算Amplifers
| 型号： | TC911BCPA |
| 厂家： | 
MICROCHIP |
| 描述： | Monolithic Auto-Zeroed Operational Amplifers |
| 文件： | 总7页 (文件大小：63K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TC911A
TC911B
Monolithic Auto-Zeroed Operational Amplifers
GENERAL DESCRIPTION
FEATURES
The TC911 CMOS auto-zeroed operational amplifier
is the first complete monolithic chopper-stabilized ampli-
fier. Chopper operational amplifiers like the ICL7650/7652
and LTC1052 require user-supplied, external offset com-
pensation storage capacitors. External capacitors are
not required with the TC911. Just as easy to use as the
conventional OP07 type amplifier, the TC911 significantly
reduces offset voltage errors. Pinout matches the OP07/
741/7650 8-pin mini-DIP configuration.
Several system benefits arise by eliminating the exter-
nal chopper capacitors: lower system parts count, reduced
assembly time and cost, greater system reliability, reduced
PC board layout effort and greater board area utilization.
Space savings can be significant in multiple-amplifier de-
signs.
■ First Monolithic Chopper-Stabilized Amplifier
With On-Chip Nulling Capacitors
■ Offset Voltage .................................................... 5µV
■ Offset Voltage Drift .................................. 0.05µV/°C
■ Low Supply Current ...................................... 350µA
■ High Common-Mode Rejection .................... 116dB
■ Single Supply Operation .......................4.5V to 16V
■ High Slew Rate......................................... 2.5V/µsec
■ Wide Bandwidth............................................1.5MHz
■ High Open-Loop Voltage Gain
(RL = 10kΩ) ..................................................... 120dB
■ Low Input Voltage Noise
(0.1Hz to 1Hz) ............................................ 0.65µVP-P
■ Pin Compatible With ICL7650
■ Lower System Parts Count
Electrical specifications include 15µV maximum offset
voltage, 0.15µV/°C maximum offset voltage temperature
coefficient. Offset voltage error is five times lower than the
premium OP07E bipolar device. The TC911 improves off-
set drift performance by eight times.
The TC911 operates from dual or single power sup-
plies. Supply current is typically 350µA. Single 4.5V to 16V
supply operation is possible, making single 9V battery
operation possible. The TC911 is available in 2 package
types: 8-pin plastic DIP and SOIC.
ORDERING INFORMATION
Maximum
Offset
Voltage
Temperature
Range
Part No.
Package
TC911ACOA
TC911ACPA
8-Pin SOIC 0°C to +70°C
15µV
15µV
8-Pin
0°C to +70°C
Plastic DIP
PIN CONFIGURATION (SOIC and DIP)
TC911BCOA
TC911BCPA
8-Pin SOIC 0°C to +70°C
30µV
30µV
8-Pin
Plastic DIP
0°C to +70°C
NC
– INPUT
+ INPUT
1
2
3
4
8
7
6
5
NC
– INPUT
+ INPUT
1
2
3
4
8
7
6
5
NC
V
NC
V
DD
DD
TC911ACOA
TC911BCOA
TC911ACPA
TC911BCPA
OUTPUT
NC
OUTPUT
NC
V
V
SS
SS
NC = NO INTERNAL CONNECTION
FUNCTIONAL BLOCK DIAGRAM
V
V
SS
DD
4
7
V
CORRECTION AMPLIFIER
A
OS
2
+
–INPUT
INTERNAL
OSCILLATOR
(f ≈ 200 Hz)
–
B
B
OSC
*
*
TC911
A
+
–
LOW IMPEDANCE
OUTPUT BUFFER
3
+
–
+INPUT
6
OUTPUT
MAIN
AMPLIFIER
*NOTE: Internal capacitors. No external capacitors required.
© 2001 Microchip Technology Inc. DS21481A
TC911/A/B-7 9/11/96
Monolithic Auto-Zeroed Operational Amplifers
TC911A
TC911/B
Package Power Dissipation (TA ≤ 70°C)
ABSOLUTE MAXIMUM RATINGS*
Plastic DIP ......................................................730mW
Total Supply Voltage (VDD to VSS) ........................... +18V
Input Voltage .......................... (VDD +0.3V) to (VSS –0.3V)
Current into Any Pin .................................................10mA
While Operating ............................................... 100µA
Storage Temperature Range ................ – 65°C to +150°C
Lead Temperature (Soldering, 10 sec) ................. +300°C
Operating Temperature Range
Plastic SOIC ...................................................470mW
*Static-sensitive device. Unused devices should be stored in conductive
material. Stresses above those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. These are stress ratings only
and functional operation of the device at these or any other conditions
abovethoseindicatedintheoperationalsectionsofthespecificationsisnot
implied.
C Device ................................................ 0°C to +70°C
ELECTRICAL CHARACTERISTICS: VS = ±5V, TA = +25°C, unless otherwise indicated.
TC911A
TC911B
Symbol Parameter
Test Conditions
Min
Typ
Max
Min
Typ
Max
Unit
VOS
Input Offset Voltage
TA = +25°C
—
5
15
—
15
30
µV
TCVOS
Average Temperature
Coefficient of Input
Offset Voltage
0°C ≤ TA ≤ +70°C
–25°C ≤ TA ≤ +85°C
(Note 1)
—
—
0.05
0.05
0.15
0.15
—
—
0.1
0.1
0.25
0.25
µV/°C
µV/°C
IB
Average Input Bias
Current
TA = +25°C
0°C ≤ TA ≤ +70°C
–25°C ≤ TA ≤ +85°C
—
—
—
—
—
—
70
3
4
—
—
—
—
—
—
120
4
6
pA
nA
nA
IOS
Average Input
Offset Current
TA = +25°C
TA = +85°C
—
—
5
—
20
1
—
—
10
—
40
1
pA
nA
eN
Input Voltage Noise
0.1 to 1 Hz, RS ≤ 100Ω
0.1 to 10 Hz, RS ≤ 100Ω
—
—
0.65
11
—
—
—
—
0.65
11
—
—
µVP-P
µVP-P
CMRR
CMVR
AOL
Common-Mode
Rejection Ratio
VSS ≤ VCM ≤ VDD – 2.2
110
VSS
115
116
—
VDD – 2
—
105
VSS
110
110
—
VDD –2
—
dB
Common-Mode
Voltage Range
—
—
V
Open-Loop Voltage
Gain
RL = 10 kΩ, VOUT = ±4V
120
120
dB
VOUT
BW
Output Voltage Swing
RL = 10 kΩ
VSS + 0.3
—
—
VDD – 0.9 VSS + 0.3
—
VDD – 0.9
—
V
Closed Loop
Bandwidth
Closed Loop Gain = +1
1.5
—
—
1.5
MHz
SR
Slew Rate
RL = 10 kΩ, CL = 50pF
±3.3V to ±5.5V
—
2.5
—
—
—
—
2.5
—
—
—
V/µsec
PSRR
Power Supply
Rejection Ratio
112
105
dB
VS
IS
Operating Supply
Voltage Range
Split Supply
Single Supply
±3.3
6.5
—
—
±8
16
±3.3
6.5
—
—
±8
16
V
V
Quiescent Supply
Current
VS = ±5V
—
350
600
—
—
800
µA
NOTES: 1. Characterized; not 100% tested.
© 2001 Microchip Technology Inc. DS21481A
2
Monolithic Auto-Zeroed Operational Amplifers
TC911A
TC911B
TYPICAL CHARACTERISTICS
Input Offset Voltage vs.
Supply Current vs. Temperature
Common-Mode Voltage
Supply Current vs. ± Supply Voltage
450
400
350
300
250
200
35
30
25
20
15
700
600
500
400
300
200
T
= +25°C
V
= ±5V
A
V
T
= ±5V
S
S
= +25°C
A
10
100
0
5
0
–6 –5 –4 –3 –2 –1
0
1
2
3
4
–100
–50
0
50
100
150
2
3
4
5
6
7
8
AMBIENT TEMPERATURE (°C)
INPUT COMMON-MODE VOLTAGE (V)
± SUPPLY VOLTAGE (V)
Output Voltage Swing vs.
Load Resistance
Large Signal Output
Switching Waveform
Gain and Phase vs. Frequency
5.8
5.0
4.2
50
40
30
20
225
180
135
V
T
R
= ±5V
= +25°C
= 10 k
Ω
T
= +25°C
= ±5V
S
R
T
= 10 kΩ
S
A
L
–SWING
V
A
= +25°C
INPUT VERTICAL
SCALE = 2 V/DIV
A
PHASE
L
OUTPUT
VERTICAL
SCALE
GAIN
90
45
+SWING
10
0
= 1 V/DIV
3.4
2.6
1.8
1.0
0
0V
–45
–90
–135
–180
–10
–20
–30
–40
100
1k
10k
100k
1M
10k
100k
1M
10M
FREQUENCY (Hz)
HORIZONTAL SCALE = 2 µs/DIV
LOAD RESISTANCE (Ω)
© 2001 Microchip Technology Inc. DS21481A
3
Monolithic Auto-Zeroed Operational Amplifers
TC911A
TC911/B
(Seebeckvoltage)canbemeasured.Junctiontempera-
ture and metal type determine the magnitude. Typical
Pin Compatibility
The CMOS TC911 is pin compatible with the industry
standard ICL7650chopper-stabilizedamplifier.TheICL7650
must use external 0.1µF capacitors connected at pins 1 and
8. With the TC911, external offset voltage error cancel-
ing capacitors are not required. On the TC911 pins 1, 8
and 5 are not connected internally. The ICL7650 uses pin 5
as an optional output clamp connection. External chopper
capacitors and clamp connections are not necessary with
the TC911. External circuits connected to pins 1, 8 and 5 will
have no effect. The TC911 can be quickly evaluated in
existing ICL7650 designs. Since external capacitors are not
required, system part count, assembly time, and total sys-
tem cost are reduced. Reliability is increased and PC board
layout eased by having the error storage capacitors inte-
grated on the TC911 chip.
The TC911 pinout matches many existing op-amps:
741, LM101, LM108, OP05–OP08, OP-20, OP-21, ICL7650
and ICL7652. In many applications operating from +5V
supplies the TC911 offers superior electrical performance
and can be a functional pin-compatible replacement. Offset
voltage correction potentiometers, compensation capaci-
tors, and chopper-stabilization capacitors can be removed
when retrofitting existing equipment designs.
values are 0.1µV/°C to 10µV/°C. Thermal-induced voltages
canbemanytimeslargerthantheTC911offsetvoltagedrift.
Unless unwanted thermocouple potentials can be con-
trolled, system performance will be less than optimum.
Unwanted thermocouple junctions are created when
leads are soldered or sockets/connectors are used. Low
thermo-electric coefficient solder can reduce errors. A 60%
Sn/36% Pb solder has 1/10 the thermal voltage of common
64% Sn/36% Pb solder at a copper junction.
The number and type of dissimilar metallic junctions in
the input circuit loop should be balanced. If the junctions are
kept at the same temperature, their summation will add to
zero-canceling errors (Figure 1).
Shielding precision analog circuits from air currents —
especially those caused by power dissipating components
and fans — will minimize temperature gradients and ther-
mocouple-induced errors.
Avoiding Latch-Up
Junction-isolated CMOS circuits inherently contain a
parasitic p-n-p-n transistor circuit. Voltages exceeding the
supplies by 0.3V should not be applied to the device pins.
Larger voltages can turn the p-n-p-n device on, causing
excessivedevicepowersupplycurrentandexcessivepower
dissipation. TC911 power supplies should be established at
thesametimeorbeforeinputsignalsareapplied.Ifthisisnot
possible input current should be limited to 0.1mA to avoid
triggering the p-n-p-n structure.
Thermocouple Errors
Heating one joint of a loop made from two different
metallic wires causes current flow. This is known as the
Seebeckeffect.Bybreakingtheloop,anopencircuitvoltage
J
J
J
= J
= J
= J
3
2
1
4
5
6
NO TEMPERATURE DIFFERENTIAL
AND SAME METALLIC CONNECTION
Overload Recovery
J
2
J
1
TheTC911recoversquicklyfromtheoutputsatura-
tion. Typicalrecovery time frompositive output saturation is
20msec. Negative output saturation recovery time is typi-
cally 5msec.
PACKAGE
PIN
J
3
J
6
J
4
J
5
J
J
1
2
+
–
+
–
V
V
1
–
2
J
V
3
3
+
V
= V + V + V – V – V – V = 0
V = 0
T
T
1
2
3
4
5
6
+
J
V
4
4
V
V
6
–
5
+
–
+
–
J
J
6
5
Figure 1. Unwanted Thermocouple Errors Eliminated by
Reducing Thermal Gradients and Balancing Junctions
© 2001 Microchip Technology Inc. DS21481A
4
Monolithic Auto-Zeroed Operational Amplifers
TC911A
TC911B
TYPICAL APPLICATIONS
Thermometer Circuit
10-Volt Precision Reference
+9V
TC911
TEMP
OUT
+15V
18 kΩ
REF02
ADJ
R
TC911
2
3
2
7
+
6
V
= 10V
V
OUT
REF
–
R
4
1
–
V
OUT
0.1 µF
3.6 kΩ
6.4V
+
R
3
6.4 kΩ
R
R
+ R
2
3
1
V
= V
=
1 + R
V
–
]
TEMP[ ( ) [ REF
]
OUT
2
R
R X R
1
1
3
R
+ R
d V
OUT
dT
d (V
)
TEMP
dT
3
1
K (2.1 mV/°C)
≈
1 + R
[ ( )]
2
R X R
3
1
R
2
K = 1 +
R X R
3
1
Programmable Gain Amplifier With Input Multiplexer
+5V –5V
GND
+5V –5V
IN
1
TC911
X1
+
V
IN
OUT
2
IC1b
–
IN
3
IN
4
IC1b
+5V
–5V
X 10
X100
X1000
A
A A A WR
1
2
3 4
18 kΩ
99 kΩ
999 kΩ
INPUT
CHANNEL
SELECT
GND
WR
A
LATCH
GAIN
SELECT
A
A
A
1
2
3
4
2 kΩ
1 kΩ
1 kΩ
68HC11
IC1a, b, = Quad Analog Switch
© 2001 Microchip Technology Inc. DS21481A
5
Monolithic Auto-Zeroed Operational Amplifers
TC911A
TC911/B
PACKAGE DIMENSIONS
PIN 1
.260 (6.60)
.240 (6.10)
.045 (1.14)
.030 (0.76)
.070 (1.78)
.040 (1.02)
.310 (7.87)
.290 (7.37)
.400 (10.16)
.348 (8.84)
.200 (5.08)
.140 (3.56)
.040 (1.02)
.020 (0.51)
.015 (0.38)
.008 (0.20)
3° MIN.
.150 (3.81)
.115 (2.92)
.400 (10.16)
.310 (7.87)
.110 (2.79)
.090 (2.29)
.022 (0.56)
.015 (0.38)
8-Pin SOIC (Narrow)
PIN 1
.157 (3.99)
.150 (3.81)
.244 (6.20)
.228 (5.79)
.050 (1.27) TYP.
.197 (5.00)
.189 (4.80)
.069 (1.75)
.053 (1.35)
.010 (0.25)
.007 (0.18)
8° MAX.
.020 (0.51)
.013 (0.33)
.010 (0.25)
.004 (0.10)
.050 (1.27)
.016 (0.40)
Dimensions: inches (mm)
© 2001 Microchip Technology Inc. DS21481A
6
WORLDWIDE
SALES AND
S
ERVICE
New York
150 Motor Parkway, Suite 202
Hauppauge, NY 11788
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200 Fax: 480-792-7277
Technical Support: 480-792-7627
Web Address: http://www.microchip.com
ASIA/PACIFIC (continued)
Singapore
Microchip Technology Singapore Pte Ltd.
200 Middle Road
#07-02 Prime Centre
Singapore, 188980
Tel: 631-273-5305 Fax: 631-273-5335
San Jose
Microchip Technology Inc.
2107 North First Street, Suite 590
San Jose, CA 95131
Tel: 65-334-8870 Fax: 65-334-8850
Rocky Mountain
Taiwan
Microchip Technology Taiwan
11F-3, No. 207
Tung Hua North Road
Taipei, 105, Taiwan
Tel: 886-2-2717-7175 Fax: 886-2-2545-0139
Tel: 408-436-7950 Fax: 408-436-7955
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7966 Fax: 480-792-7456
Toronto
6285 Northam Drive, Suite 108
Mississauga, Ontario L4V 1X5, Canada
Tel: 905-673-0699 Fax: 905-673-6509
Atlanta
500 Sugar Mill Road, Suite 200B
Atlanta, GA 30350
Tel: 770-640-0034 Fax: 770-640-0307
Austin
Analog Product Sales
8303 MoPac Expressway North
Suite A-201
ASIA/PACIFIC
China - Beijing
Microchip Technology Beijing Office
Unit 915
New China Hong Kong Manhattan Bldg.
No. 6 Chaoyangmen Beidajie
Beijing, 100027, No. China
Tel: 86-10-85282100 Fax: 86-10-85282104
EUROPE
Australia
Microchip Technology Australia Pty Ltd
Suite 22, 41 Rawson Street
Epping 2121, NSW
Austin, TX 78759
Tel: 512-345-2030 Fax: 512-345-6085
Australia
Tel: 61-2-9868-6733 Fax: 61-2-9868-6755
Denmark
Microchip Technology Denmark ApS
Regus Business Centre
Lautrup hoj 1-3
Ballerup DK-2750 Denmark
Tel: 45 4420 9895 Fax: 45 4420 9910
Boston
2 Lan Drive, Suite 120
Westford, MA 01886
Tel: 978-692-3848 Fax: 978-692-3821
China - Shanghai
Microchip Technology Shanghai Office
Room 701, Bldg. B
Far East International Plaza
No. 317 Xian Xia Road
Shanghai, 200051
Boston
Analog Product Sales
Unit A-8-1 Millbrook Tarry Condominium
97 Lowell Road
Concord, MA 01742
France
Tel: 86-21-6275-5700 Fax: 86-21-6275-5060
Arizona Microchip Technology SARL
Parc díActivite du Moulin de Massy
43 Rue du Saule Trapu
Hong Kong
Microchip Asia Pacific
RM 2101, Tower 2, Metroplaza
223 Hing Fong Road
Kwai Fong, N.T., Hong Kong
Tel: 852-2401-1200 Fax: 852-2401-3431
Tel: 978-371-6400 Fax: 978-371-0050
Chicago
333 Pierce Road, Suite 180
Itasca, IL 60143
Tel: 630-285-0071 Fax: 630-285-0075
Dallas
4570 Westgrove Drive, Suite 160
Addison, TX 75001
Tel: 972-818-7423 Fax: 972-818-2924
Batiment A - ler Etage
91300 Massy, France
Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79
Germany
Arizona Microchip Technology GmbH
Gustav-Heinemann Ring 125
D-81739 Munich, Germany
India
Microchip Technology Inc.
India Liaison Office
Divyasree Chambers
Tel: 49-89-627-144 0 Fax: 49-89-627-144-44
1 Floor, Wing A (A3/A4)
No. 11, OíShaugnessey Road
Bangalore, 560 025, India
Tel: 91-80-2290061 Fax: 91-80-2290062
Dayton
Germany
Analog Product Sales
Lochhamer Strasse 13
D-82152 Martinsried, Germany
Tel: 49-89-895650-0 Fax: 49-89-895650-22
Two Prestige Place, Suite 130
Miamisburg, OH 45342
Tel: 937-291-1654 Fax: 937-291-9175
Japan
Detroit
Tri-Atria Office Building
32255 Northwestern Highway, Suite 190
Farmington Hills, MI 48334
Tel: 248-538-2250 Fax: 248-538-2260
Microchip Technology Intl. Inc.
Benex S-1 6F
Italy
Arizona Microchip Technology SRL
Centro Direzionale Colleoni
Palazzo Taurus 1 V. Le Colleoni 1
20041 Agrate Brianza
3-18-20, Shinyokohama
Kohoku-Ku, Yokohama-shi
Kanagawa, 222-0033, Japan
Tel: 81-45-471- 6166 Fax: 81-45-471-6122
Los Angeles
18201 Von Karman, Suite 1090
Irvine, CA 92612
Milan, Italy
Tel: 39-039-65791-1 Fax: 39-039-6899883
Korea
Microchip Technology Korea
168-1, Youngbo Bldg. 3 Floor
Samsung-Dong, Kangnam-Ku
Seoul, Korea
Tel: 949-263-1888 Fax: 949-263-1338
United Kingdom
Arizona Microchip Technology Ltd.
505 Eskdale Road
Winnersh Triangle
Wokingham
Mountain View
Analog Product Sales
1300 Terra Bella Avenue
Mountain View, CA 94043-1836
Tel: 650-968-9241 Fax: 650-967-1590
Tel: 82-2-554-7200 Fax: 82-2-558-5934
Berkshire, England RG41 5TU
Tel: 44 118 921 5869 Fax: 44-118 921-5820
01/09/01
All rights reserved.
©
2001 Microchip Technology Incorporated. Printed in the USA. 1/01
Printed on recycled paper.
Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by
updates. It is your responsibility to ensure that your application meets with your specifications. No representation or warranty is given and no liability is
assumed by Microchip Technology Incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual
property rights arising from such use or otherwise. Use of Microchipís products as critical components in life support systems is not authorized except with
express written approval by Microchip. No licenses are conveyed, implicitly or otherwise, except as maybe explicitly expressed herein, under any intellec-
tual property rights. The Microchip logo and name are registered trademarks of Microchip Technology Inc. in the U.S.A. and other countries. All rights
reserved. All other trademarks mentioned herein are the property of their respective companies.
© 2001 Microchip Technology Inc. DS21481A
7
相关型号：
©2020 ICPDF网 联系我们和版权申明