PIC12LF1840T39A-I/ST [MICROCHIP]

RISC MICROCONTROLLER;
PIC12LF1840T39A-I/ST
型号: PIC12LF1840T39A-I/ST
厂家: MICROCHIP    MICROCHIP
描述:

RISC MICROCONTROLLER

微控制器 光电二极管 外围集成电路
文件: 总6页 (文件大小:157K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PIC12LF1840T39A  
PIC12LF1840T39A Product Brief  
High-Performance RISC CPU:  
Low-Power Features:  
• Standby Current:  
• Only 49 Instructions to Learn:  
- 30 nA @ 3.0V, typical, RF off  
- 530 nA @ 3.0V, typical, RF Sleep  
• Operating Current:  
- 0.67 mA @ 8 MHz, 3.0V, RF off, typical  
- 9.67 mA @ 8 MHz, 3.0V, RF on at 0 dBm,  
typical  
- All single-cycle instructions except branches  
• Operating Speed:  
- DC – 32 MHz oscillator/clock input  
- DC – 125 ns instruction cycle  
• Interrupt Capability with Automatic Context  
Saving  
- 15.67 mA @ 8 MHz, 3.0V, RF on at +10 dBm,  
typical  
• Low-Power Watchdog Timer Current:  
- 500 nA @ 3.0V, typical  
• 16-Level Deep Hardware Stack with Optional  
Overflow/Underflow Reset  
• Direct, Indirect and Relative Addressing modes:  
- Two full 16-bit File Select Registers (FSRs)  
- FSRs can read program and data memory  
RF Transmitter:  
Flexible Oscillator Structure:  
• Fully Integrated Transmitter  
• Precision 32 MHz Internal Oscillator Block:  
- Factory calibrated to ± 1%, typical  
- Software selectable frequencies range of  
31 kHz to 32 MHz  
• 31 kHz Low-Power Internal Oscillator  
• Four Crystal modes up to 32 MHz  
• Three External Clock modes up to 32 MHz  
• 4x Phase Lock Loop (PLL)  
• Fail-Safe Clock Monitor:  
- Allows for safe shutdown if peripheral clock  
stops  
• Two-Speed Oscillator Start-up  
• Reference Clock module:  
- Programmable clock output frequency and  
duty-cycle  
• FSK Operation up to 100 kbps  
• OOK Operation up to 10 kbps  
• Frequency-Agile Operation in 310, 433, 868 and  
915 MHz Bands  
• +10 dBm or 0 dBm Configurable Output Power  
Analog Features:  
• Analog-to-Digital Converter (ADC) module:  
- 10-bit resolution, 4 channels  
- Conversion available during Sleep  
• Analog Comparator module:  
- One rail-to-rail analog comparator  
- Power mode control  
- Software controllable hysteresis  
• Voltage Reference module:  
- Fixed Voltage Reference (FVR) with 1.024V  
and 2.048V output levels  
- 5-bit rail-to-rail resistive DAC with positive  
and negative reference selection  
Special Microcontroller Features:  
• 1.8V-3.6V Operation  
• Self-Reprogrammable under Software Control  
• Power-on Reset (POR), Power-up Timer (PWRT)  
and Oscillator Start-up Timer (OST)  
• Programmable Brown-out Reset (BOR)  
• Extended Watchdog Timer (WDT)  
• In-Circuit Serial Programming™ (ICSP™) via  
Two Pins  
• In-Circuit Debug (ICD) via Two Pins  
• Enhanced Low-Voltage Programming (LVP)  
• Programmable Code Protection  
• Power-Saving Sleep mode  
Peripheral Features:  
• 5 I/O Pins and 1 Input-only Pin:  
- High current sink/source 25 mA/25 mA  
- Programmable weak pull-ups  
- Programmable interrupt-on-change pins  
• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler  
• Enhanced Timer1:  
- 16-bit timer/counter with prescaler  
- External Gate Input mode  
- Dedicated, low-power 32 kHz oscillator driver  
• Timer2: 8-Bit Timer/Counter with 8-Bit Period  
Register, Prescaler and Postscaler  
2012 Microchip Technology Inc.  
Advance Information  
DS41627A-page 1  
PIC12LF1840T39A  
• Enhanced CCP (ECCP) module:  
- Software selectable time bases  
- Auto-shutdown and auto-restart  
- PWM steering  
• Master Synchronous Serial Port (MSSP) with SPI  
and I2CTM with:  
- 7-bit address masking  
- SMBus/PMBusTM compatibility  
• Enhanced Universal Synchronous Asynchronous  
Receiver Transmitter (EUSART) module:  
- RS-232, RS-485 and LIN compatible  
- Auto-Baud Detect  
• Capacitive Sensing (CPS) module (mTouchTM):  
- 4 input channels  
• Data Signal Modulator module:  
- Selectable modulator and carrier sources  
• SR Latch:  
- Multiple Set/Reset input options  
- Emulates 555 Timer applications  
TABLE 1:  
PIC12LF1840T39A FEATURE SUMMARY  
PIC12LF1840T39A  
4K  
256  
256  
6
4
4
1
2/1  
1
1
1
Yes Yes  
I
Note 1: One pin is input-only.  
2: I – Debugging, Integrated on Chip; H – Debugging, Debug Header Available  
Note:  
Pin details are subject to change.  
14-PIN DIAGRAM, PIC12LF1840T39A (TSSOP)  
FIGURE 1:  
V
DD  
Vss  
14  
13  
12  
11  
10  
1
2
RA5  
RA4  
RA0/ICSPDAT  
RA1/ICSPCLK  
3
4
MCLR/VPP/RA3  
RA2  
XTAL  
V
DDRF  
5
6
CTRL  
DATA  
9
8
RFOUT  
7
V
SSRF  
DS41627A-page 2  
Advance Information  
2012 Microchip Technology Inc.  
TABLE 2:  
14-PIN ALLOCATION TABLE (PIC12LF1840T39A)  
RA0  
RA1  
RA2  
13  
12  
11  
AN0  
AN1  
AN2  
DACOUT  
VREF  
CPS0  
CPS1  
CPS2  
C1IN+  
C1IN0-  
C1OUT  
P1B(1)  
TX(1)  
CK(1)  
SDO(1)  
SS(1)  
IOC  
IOC  
MDOUT  
MDMIN  
Y
Y
Y
ICSPDAT  
ICDDAT  
SRI  
SRQ  
RX(1)  
SCL  
SCK  
ICSPCLK  
DT(1)  
T0CKI  
CCP1(1)  
P1A(1)  
FLT0  
SDA  
SDI  
INT  
IOC  
MDCOM1  
T1G(2)  
IOC  
IOC  
Y
Y
SS(1)  
MCLR  
VPP  
RA3  
RA4  
4
3
AN3  
CPS3  
C1IN1-  
T1G(1)  
T1OSO  
P1B(1)  
TX(1)  
CK(1)  
SDO(1)  
MDCIN2  
OSC2  
CLKOUT  
CLKR  
RA5  
2
SRNQ  
T1CKI  
T1OSI  
CCP1(1)  
P1A(1)  
RX(1)  
DT(1)  
IOC  
Y
OSC1  
CLKIN  
VDD  
VSS  
1
14  
6
VDD  
VSS  
CTRL  
RFOUT  
DATA  
XTAL  
VDDRF  
VSSRF  
CTRL  
RFOUT  
DATA  
XTAL  
VDDRF  
VSSRF  
7
9
10  
5
8
Note 1: Pin function is selectable via the APFCON register.  
PIC12LF1840T39A  
APPENDIX A: REVISION HISTORY  
Revision A (03/2012)  
Initial release of this document.  
DS41627A-page 4  
Advance Information  
2012 Microchip Technology Inc.  
Note the following details of the code protection feature on Microchip devices:  
Microchip products meet the specification contained in their particular Microchip Data Sheet.  
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the  
intended manner and under normal conditions.  
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our  
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data  
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.  
Microchip is willing to work with the customer who is concerned about the integrity of their code.  
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not  
mean that we are guaranteeing the product as “unbreakable.”  
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our  
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts  
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.  
Information contained in this publication regarding device  
applications and the like is provided only for your convenience  
and may be superseded by updates. It is your responsibility to  
ensure that your application meets with your specifications.  
MICROCHIP MAKES NO REPRESENTATIONS OR  
WARRANTIES OF ANY KIND WHETHER EXPRESS OR  
IMPLIED, WRITTEN OR ORAL, STATUTORY OR  
OTHERWISE, RELATED TO THE INFORMATION,  
INCLUDING BUT NOT LIMITED TO ITS CONDITION,  
QUALITY, PERFORMANCE, MERCHANTABILITY OR  
FITNESS FOR PURPOSE. Microchip disclaims all liability  
arising from this information and its use. Use of Microchip  
devices in life support and/or safety applications is entirely at  
the buyer’s risk, and the buyer agrees to defend, indemnify and  
hold harmless Microchip from any and all damages, claims,  
suits, or expenses resulting from such use. No licenses are  
conveyed, implicitly or otherwise, under any Microchip  
intellectual property rights.  
Trademarks  
The Microchip name and logo, the Microchip logo, dsPIC,  
KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART,  
32  
PIC logo, rfPIC and UNI/O are registered trademarks of  
Microchip Technology Incorporated in the U.S.A. and other  
countries.  
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,  
MXDEV, MXLAB, SEEVAL and The Embedded Control  
Solutions Company are registered trademarks of Microchip  
Technology Incorporated in the U.S.A.  
Analog-for-the-Digital Age, Application Maestro, chipKIT,  
chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net,  
dsPICworks, dsSPEAK, ECAN, ECONOMONITOR,  
FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP,  
Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB,  
MPLINK, mTouch, Omniscient Code Generation, PICC,  
PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE,  
rfLAB, Select Mode, Total Endurance, TSHARC,  
UniWinDriver, WiperLock and ZENA are trademarks of  
Microchip Technology Incorporated in the U.S.A. and other  
countries.  
SQTP is a service mark of Microchip Technology Incorporated  
in the U.S.A.  
All other trademarks mentioned herein are property of their  
respective companies.  
© 2012, Microchip Technology Incorporated, Printed in the  
U.S.A., All Rights Reserved.  
Printed on recycled paper.  
ISBN: 9781620761120  
QUALITY MANAGEMENT SYSTEM  
CERTIFIED BY DNV  
Microchip received ISO/TS-16949:2009 certification for its worldwide  
headquarters, design and wafer fabrication facilities in Chandler and  
Tempe, Arizona; Gresham, Oregon and design centers in California  
and India. The Company’s quality system processes and procedures  
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping  
devices, Serial EEPROMs, microperipherals, nonvolatile memory and  
analog products. In addition, Microchip’s quality system for the design  
and manufacture of development systems is ISO 9001:2000 certified.  
== ISO/TS 16949 ==  
2012 Microchip Technology Inc.  
Advance Information  
DS41627A-page 5  
Worldwide Sales and Service  
AMERICAS  
ASIA/PACIFIC  
ASIA/PACIFIC  
EUROPE  
Corporate Office  
2355 West Chandler Blvd.  
Chandler, AZ 85224-6199  
Tel: 480-792-7200  
Fax: 480-792-7277  
Technical Support:  
http://www.microchip.com/  
support  
Asia Pacific Office  
Suites 3707-14, 37th Floor  
Tower 6, The Gateway  
Harbour City, Kowloon  
Hong Kong  
Tel: 852-2401-1200  
Fax: 852-2401-3431  
India - Bangalore  
Tel: 91-80-3090-4444  
Fax: 91-80-3090-4123  
Austria - Wels  
Tel: 43-7242-2244-39  
Fax: 43-7242-2244-393  
Denmark - Copenhagen  
Tel: 45-4450-2828  
Fax: 45-4485-2829  
India - New Delhi  
Tel: 91-11-4160-8631  
Fax: 91-11-4160-8632  
France - Paris  
Tel: 33-1-69-53-63-20  
Fax: 33-1-69-30-90-79  
India - Pune  
Tel: 91-20-2566-1512  
Fax: 91-20-2566-1513  
Australia - Sydney  
Tel: 61-2-9868-6733  
Fax: 61-2-9868-6755  
Web Address:  
www.microchip.com  
Germany - Munich  
Tel: 49-89-627-144-0  
Fax: 49-89-627-144-44  
Japan - Osaka  
Tel: 81-66-152-7160  
Fax: 81-66-152-9310  
Atlanta  
Duluth, GA  
Tel: 678-957-9614  
Fax: 678-957-1455  
China - Beijing  
Tel: 86-10-8569-7000  
Fax: 86-10-8528-2104  
Italy - Milan  
Tel: 39-0331-742611  
Fax: 39-0331-466781  
Japan - Yokohama  
Tel: 81-45-471- 6166  
Fax: 81-45-471-6122  
China - Chengdu  
Tel: 86-28-8665-5511  
Fax: 86-28-8665-7889  
Boston  
Westborough, MA  
Tel: 774-760-0087  
Fax: 774-760-0088  
Netherlands - Drunen  
Tel: 31-416-690399  
Fax: 31-416-690340  
Korea - Daegu  
Tel: 82-53-744-4301  
Fax: 82-53-744-4302  
China - Chongqing  
Tel: 86-23-8980-9588  
Fax: 86-23-8980-9500  
Chicago  
Itasca, IL  
Tel: 630-285-0071  
Fax: 630-285-0075  
Spain - Madrid  
Tel: 34-91-708-08-90  
Fax: 34-91-708-08-91  
Korea - Seoul  
China - Hangzhou  
Tel: 86-571-2819-3187  
Fax: 86-571-2819-3189  
Tel: 82-2-554-7200  
Fax: 82-2-558-5932 or  
82-2-558-5934  
UK - Wokingham  
Tel: 44-118-921-5869  
Fax: 44-118-921-5820  
Cleveland  
Independence, OH  
Tel: 216-447-0464  
Fax: 216-447-0643  
China - Hong Kong SAR  
Tel: 852-2401-1200  
Fax: 852-2401-3431  
Malaysia - Kuala Lumpur  
Tel: 60-3-6201-9857  
Fax: 60-3-6201-9859  
Dallas  
Addison, TX  
Tel: 972-818-7423  
Fax: 972-818-2924  
China - Nanjing  
Tel: 86-25-8473-2460  
Fax: 86-25-8473-2470  
Malaysia - Penang  
Tel: 60-4-227-8870  
Fax: 60-4-227-4068  
China - Qingdao  
Tel: 86-532-8502-7355  
Fax: 86-532-8502-7205  
Philippines - Manila  
Tel: 63-2-634-9065  
Fax: 63-2-634-9069  
Detroit  
Farmington Hills, MI  
Tel: 248-538-2250  
Fax: 248-538-2260  
China - Shanghai  
Tel: 86-21-5407-5533  
Fax: 86-21-5407-5066  
Singapore  
Tel: 65-6334-8870  
Fax: 65-6334-8850  
Indianapolis  
Noblesville, IN  
Tel: 317-773-8323  
Fax: 317-773-5453  
China - Shenyang  
Tel: 86-24-2334-2829  
Fax: 86-24-2334-2393  
Taiwan - Hsin Chu  
Tel: 886-3-5778-366  
Fax: 886-3-5770-955  
Los Angeles  
China - Shenzhen  
Tel: 86-755-8203-2660  
Fax: 86-755-8203-1760  
Taiwan - Kaohsiung  
Tel: 886-7-536-4818  
Fax: 886-7-330-9305  
Mission Viejo, CA  
Tel: 949-462-9523  
Fax: 949-462-9608  
China - Wuhan  
Tel: 86-27-5980-5300  
Fax: 86-27-5980-5118  
Taiwan - Taipei  
Tel: 886-2-2500-6610  
Fax: 886-2-2508-0102  
Santa Clara  
Santa Clara, CA  
Tel: 408-961-6444  
Fax: 408-961-6445  
China - Xian  
Tel: 86-29-8833-7252  
Fax: 86-29-8833-7256  
Thailand - Bangkok  
Tel: 66-2-694-1351  
Fax: 66-2-694-1350  
Toronto  
Mississauga, Ontario,  
Canada  
China - Xiamen  
Tel: 905-673-0699  
Fax: 905-673-6509  
Tel: 86-592-2388138  
Fax: 86-592-2388130  
China - Zhuhai  
Tel: 86-756-3210040  
Fax: 86-756-3210049  
11/29/11  
DS41627A-page 6  
Advance Information  
2012 Microchip Technology Inc.  

相关型号:

PIC12LF1840T48A

PIC12LF1840T48A Product Brief
MICROCHIP

PIC12LF1840T48A-I

Using the PIC12LF1840T48A Microcontroller with Integrated Sub-GHz Transmitter
MICROCHIP

PIC12R2-MTQ

1 ELEMENT, 2.2uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
RCD

PIC12R2-MTW

1 ELEMENT, 2.2uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, ROHS COMPLIANT
RCD

PIC12R2MT

1 ELEMENT, 2.2uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
RCD

PIC12R7-MTQ

1 ELEMENT, 2.7uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
RCD

PIC12R7-MTW

1 ELEMENT, 2.7uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD, ROHS COMPLIANT
RCD

PIC12R7MT

1 ELEMENT, 2.7uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
RCD

PIC1330-KTQ

1 ELEMENT, 33uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
RCD

PIC1330KT

1 ELEMENT, 33uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
RCD

PIC1331KT

General Purpose Inductor, 330uH, 10%, 1 Element, Ferrite-Core, SMD,
RCD

PIC1390-KTQ

1 ELEMENT, 39uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR, SMD
RCD