DSC1101NE2-100.0000T [MICROCHIP]
CRYSTAL OSCILLATOR, CLOCK, CMOS OUTPUT;型号: | DSC1101NE2-100.0000T |
厂家: | MICROCHIP |
描述: | CRYSTAL OSCILLATOR, CLOCK, CMOS OUTPUT 机械 输出元件 振荡器 |
文件: | 总7页 (文件大小:473K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DSC1101 DSC1121
Low-Jitter Precision CMOS Oscillator
General Description
Features
The DSC1101 & DSC1121 series of high
performance oscillators utilizes a proven
silicon MEMS technology to provide excellent
jitter and stability over a wide range of
Low RMS Phase Jitter: <1 ps (typ)
High Stability: ±10, ±25, ±50 ppm
Wide Temperature Range
o Automotive: -55° to 125° C
o Ext. Industrial: -40° to 105° C
o Industrial: -40° to 85° C
supply voltages and temperatures.
By
eliminating the need for quartz or SAW
technology, MEMS oscillators significantly
enhance reliability and accelerate product
development, while meeting stringent clock
performance criteria for a variety of
communications, storage, and networking
applications.
o Ext. commercial: -20° to 70° C
High Supply Noise Rejection: -50 dBc
Wide Freq. Range: 2.3 to 170 MHz
Small Industry Standard Footprints
o 2.5x2.0, 3.2x2.5, 5.0x3.2, & 7.0x5.0 mm
DSC1101 has a standby feature allowing it to
completely power-down when EN pin is
pulled low; whereas for DSC1121, only the
outputs are disabled when EN is low. Both
oscillators are available in industry standard
packages, including the small 3.2x2.5 mm2,
and are “drop-in” replacements for standard
4-pin CMOS quartz crystal oscillators.
Excellent Shock & Vibration Immunity
o Qualified to MIL-STD-883
High Reliability
o 20x better MTF than quartz oscillators
Low Current Consumption
Supply Range of 2.25 to 3.6 V
Standby & Output Enable Function
Lead Free & RoHS Compliant
Block Diagram
Applications
Storage Area Networks
o SATA, SAS, Fibre Channel
Passive Optical Networks
o EPON, 10G-EPON, GPON, 10G-PON
Ethernet
o 1G, 10GBASE-T/KR/LR/SR, and FCoE
HD/SD/SDI Video & Surveillance
PCI Express
Output Enable Modes
EN Pin
High
NC
DSC1101
Output Active
Output Active
Standby
DSC1121
Output Active
Output Active
Output Disabled
DisplayPort
Low
______________________________________________________________________________________________________________________________________________
DSC1101 | DSC1121 Page 1 MK-Q-B-P-D-110410-01-6
Low-Jitter Precision CMOS Oscillator
DSC1101 DSC1121
Absolute Maximum Ratings
Ordering Code
Item
Min
-0.3
-0.3
-
Max
+4.0
Unit Condition
Temp Range
E: -20 to 70
I: -40 to 85
L: -40 to 105
M: -55 to 125
Supply Voltage
Input Voltage
Junction Temp
Storage Temp
Soldering Temp
V
V
Enable Modes
0: Enable/Standby
2: Enable/Disable
Packing
T: Tape & Reel
: Tube
VDD+0.3
+150
°C
°C
-55
-
+150
DSC11 0 1 C I 5
125.0000
T
+260
°C
V
40sec max.
ESD
HBM
MM
-
Package
A: 7.0x5.0mm
B: 5.0x3.2mm
C: 3.2x2.5mm
Stability
1: ±50ppm
2: ±25ppm
5: ±10ppm
Freq (MHz)
125.0000
4000
400
1500
CDM
D: 2.5x2.0mm
N: 7.0x5.0mm (no center pad)
Note: 1000+ years of data retention on internal memory
Specifications
Parameter
Condition
Min.
Typ.
Max.
Unit
Supply Voltage1
VDD
IDD
2.25
3.6
V
EN pin low – output is disabled
DSC1101
Supply Current
0.095
22
mA
DSC1121
20
Frequency Stability
Ext Comm. & Ind. only
All temp ranges
Includes frequency variations due
to initial tolerance, temp. and
power supply voltage
±10
±25
±50
Δf
ppm
All temp ranges
Aging
Startup Time2
Δf
tSU
1 year @25°C
T=25°C
±5
5
ppm
ms
Input Logic Levels
Input logic high
Input logic low
VIH
VIL
0.75xVDD
-
-
V
0.25xVDD
Output Disable Time3
Output Enable Time
Enable Pull-Up Resistor4
tDA
5
ns
DSC1101
DSC1121
5
20
ms
ns
tEN
Pull-up resistor exist
40
31
kΩ
CMOS Output
output is enabled
CL=15pF, F0=125 MHz
Supply Current4
IDD
35
mA
V
Output Logic Levels
Output logic high
Output logic low
Output Transition time3
Rise Time
VOH
VOL
I=±6mA
0.9xVDD
-
-
0.1xVDD
20% to 80%
CL=15pF
tR
tF
1.1
1.3
2
2
ns
Fall Time
All temp range except Auto
Auto temp range
2.3
45
170
100
Frequency
f0
MHz
%
Output Duty Cycle
Period Jitter
SYM
JPER
55
Fout=125MHz
3
psRMS
200kHz to 20MHz @ 125MHz
100kHz to 20MHz @ 125MHz
12kHz to 20MHz @ 125MHz
0.3
0.38
1.7
Integrated Phase Noise
JPH
psRMS
2
1.
2.
3.
4.
Pin 6 VDD should be filtered with 0.1uf capacitor.
tsu is time to 100PPM of output frequency after VDD is applied and outputs are enabled.
Output Waveform and Test Circuit figures below define the parameters.
Output is enabled if pad is floated or not connected.
______________________________________________________________________________________________________________________________________________
DSC1101 | DSC1121 Page 2 MK-Q-B-P-D-110410-01-6
Low-Jitter Precision CMOS Oscillator
DSC1101 DSC1121
Nominal Performance Parameters (Unless specified otherwise: T=25° C, VDD=3.3 V)
0
50-mV
2.5
2.0
1.5
1.0
0.5
0.0
-10
-20
-30
-40
-50
-60
-70
-80
25MHz-CMOS
50MHz-CMOS
106MHz-CMOS
125MHz-CMOS
100-mV
0.1
1
10
100
1000
10000
Supply Noise Frequency (kHz)
0
200
400
600
800
1000
Low-end of integration BW: x kHz to 20 MHz
Power supply rejection ratio
Phase jitter (integrated phase noise)
Output Waveform
tR
tF
VOH
Output
Enable
VOL
tEN
1/fo
tDA
VIH
VIL
Typical Termination Scheme
VDD
0.1uF
6
5
2
3
4
CL CMOS load
capacitance
______________________________________________________________________________________________________________________________________________
DSC1101 | DSC1121 Page 3 MK-Q-B-P-D-110410-01-6
Low-Jitter Precision CMOS Oscillator
DSC1101 DSC1121
Test Circuit
IDD
5
2
4
6
1
3
0.1uF
VDD
15pF
VDA
Board Layout (recommended)
Solder Reflow Profile
20-40
Sec
260°C
MSL 1 @ 260°C refer to JSTD-020C
Ramp-Up Rate (200°C to Peak Temp) 3°C/Sec Max.
217°C
200°C
60-150
Sec
Preheat Time 150°C to 200°C
Time maintained above 217°C
Peak Temperature
Time within 5°C of actual Peak
Ramp-Down Rate
60-180 Sec
60-150 Sec
255-260°C
20-40 Sec
6°C/Sec Max.
8 min Max.
Reflow
60-180
Sec
150°C
Cool
Pre heat
Time 25°C to Peak Temperature
25°C
Time
8 min max
______________________________________________________________________________________________________________________________________________
DSC1101 | DSC1121 Page 4 MK-Q-B-P-D-110410-01-6
Low-Jitter Precision CMOS Oscillator
DSC1101 DSC1121
Package Dimensions
7.0 x 5.0 mm Plastic Package
EXTERNAL DIMENSIONS
Units: mm [ inches]
RECOMMENDED SOLDER PAD LAYOUT
Units: mm [ inches]
Via to Power
Via to Ground
Plane
1.4±0.10 [0.055±0.004]
Trace
2.54 [0.100]
5.08 [0.100]
7±0.10 [0.276±0.004]
5
4
6
4
5
6
4
6
3
1
1
2
3
5±0.10 [0.197±0.004]
3
2
1
2.8 [0.110]
1.4 [0.055]
No.
1
Pin Terminal
Enable
2
3
4
N/C
Ground
OUT
0.85±0.05
5
N/C
6
VDD
PAD
TIE TO GND
5.0 x 3.2 mm Plastic Package
EXTERNAL DIMENSIONS
Units: mm [ inches]
RECOMMENDED SOLDER PAD LAYOUT
Units: mm [ inches]
Via to Power
Trace
0.64±0.05
1.27 [0.050]
5
5±0.05 [0.197±0.002]
5
Via to Ground
2.54 [0.100]
6
4
6
4
Plane
6
4
3
1.2 [0.047] REF
1
3
2
1
1
2
3
0.7±0.1 [0.079±0.002]
3.2±0.05 [0.126±0.002]
1.1 [ 0.043]
No.
1
Pin Terminal
Enable
N/C
0.64 [0.025]
2
3
Ground
OUT
0.85±0.05
4
5
N/C
6
VDD
______________________________________________________________________________________________________________________________________________
DSC1101 | DSC1121 Page 5 MK-Q-B-P-D-110410-01-6
Low-Jitter Precision CMOS Oscillator
DSC1101 DSC1121
3.2 x 2.5 mm Plastic Package
EXTERNAL DIMENSIONS RECOMMENDED SOLDER PAD LAYOUT
Units: mm [ inches]
Units: mm [ inches]
Via to Power
Trace
3.2±0.05 [0.126±0.002]
1.05 [0.041]
2.1[0.083]
Via to Ground
Plane
0.7±0.1 [0.079±0.002]
6
6
5
4
4
5
0.9 [0.035] REF
0.9 [0.035] REF
6
4
3
1
1 [ 0.039]
3
2
1
1
2
3
0.1[0.004] REF
2.5±0.05 [0.098±0.002]
0.9 [0.035]
0.9±0.05 [0.035±0.002]
0.5±0.05 [0.198±0.002]
No.
Pin Terminal
Enable
N/C
1
2
3
4
5
6
0.85±0.05
Ground
OUT
N/C
VDD
2.5 x 2.0 mm Plastic Package
EXTERNAL DIMENSIONS
Units: mm [ inches]
RECOMMENDED SOLDER PAD LAYOUT
Units: mm [ inches]
2.5±0.05 [0.098±0.002]
0.7±0.1 [0.079±0.002]
0.825 [0.032]
0.6 REF
Via to
Power Trace
6
5
4
4
5
6
1.65[0.064]
Via to Ground
Plane
0.535 REF
0.7 REF
6
5
2
4
3
2
1
1
2
3
3
1
0.7±0.1 [0.079±0.002]
0.765±0.1
2.0±0.05 [0.079±0.002]
0.65±0.05 [0.026±0.002]
0.25±0.05 [0.099±0.002]
0.85
0.65±0.05 [0.026±0.002]
No.
1
Pin Terminal
Enable
N/C
0.85±0.05
2
3
Ground
OUT
4
5
N/C
6
VDD
______________________________________________________________________________________________________________________________________________
DSC1101 | DSC1121 Page 6 MK-Q-B-P-D-110410-01-6
Low-Jitter Precision CMOS Oscillator
DSC1101 DSC1121
7.0 x 5.0 mm Plastic Package (no center pad)
EXTERNAL DIMENSIONS
Units: mm [ inches]
RECOMMENDED SOLDER PAD LAYOUT
Units: mm [ inches]
Via to Power
Via to Ground
Plane
1.4±0.10 [0.055±0.004]
Trace
2.54 [0.100]
5.08 [0.100]
7±0.10 [0.276±0.004]
5
4
6
4
5
6
4
6
3
1
1
2
3
5±0.10 [0.197±0.004]
3
2
1
1.4 [0.055]
No.
1
Pin Terminal
Enable
2
3
4
N/C
Ground
OUT
0.85±0.05
5
N/C
6
VDD
Disclaimer:
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information is not intended as a
warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and descriptions at any time without notice. No license,
whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Micrel’s terms and conditions of
sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including
liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to
result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose
failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or
systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale.
MICREL, Inc.
Phone: +1 (408) 944-0800
●
●
2180 Fortune Drive,
Fax: +1 (408) 474-1000
San Jose, California
95131
●
●
USA
●
Email: hbwhelp@micrel.com
www.micrel.com
______________________________________________________________________________________________________________________________________________
DSC1101 | DSC1121 Page 7 MK-Q-B-P-D-110410-01-6
相关型号:
©2020 ICPDF网 联系我们和版权申明