93C56AX-E/MS [MICROCHIP]
2K Microwire Compatible Serial EEPROM; 2K的Microwire兼容串行EEPROM型号: | 93C56AX-E/MS |
厂家: | MICROCHIP |
描述: | 2K Microwire Compatible Serial EEPROM |
文件: | 总28页 (文件大小:470K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
93AA56A/B/C, 93LC56A/B/C,
93C56A/B/C
2K Microwire Compatible Serial EEPROM
Device Selection Table
Part Number
VCC Range
ORG Pin
Word Size
Temp Ranges
Packages
93AA56A
93AA56B
93LC56A
93LC56B
93C56A
1.8-5.5
1.8-5-5
2.5-5.5
2.5-5.5
4.5-5.5
4.5-5.5
1.8-5.5
2.5-5.5
4.5-5.5
No
No
8-bit
16-bit
I
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, OT, MC
P, SN, ST, MS, MC
I
No
8-bit
I, E
I, E
I, E
I, E
I
No
16-bit
No
8-bit
93C56B
No
16-bit
93AA56C
93LC56C
93C56C
Yes
Yes
Yes
8 or 16-bit
8 or 16-bit
8 or 16-bit
I, E
I, E
P, SN, ST, MS, MC
P, SN, ST, MS, MC
Features:
Description:
• Low-power CMOS technology
The Microchip Technology Inc. 93XX56A/B/C devices
are 2K bit low-voltage serial Electrically Erasable
PROMs (EEPROM). Word-selectable devices such as
the 93AA56C, 93LC56C or 93C56C are dependent
upon external logic levels driving the ORG pin to set
word size. For dedicated 8-bit communication, the
93XX56A devices are available, while the 93XX56B
devices provide dedicated 16-bit communication.
Advanced CMOS technology makes these devices
ideal for low-power, nonvolatile memory applications.
The entire 93XX Series is available in standard
packages including 8-lead PDIP and SOIC, and
advanced packaging including 8-lead MSOP, 6-lead
SOT-23, 8-lead 2x3 DFN and 8-lead TSSOP. All
packages are Pb-free and RoHS compliant.
• ORG pin to select word size for ‘56C’ version
• 256 x 8-bit organization ‘A’ ver. devices (no ORG)
• 128 x 16-bit organization ‘B’ ver. devices (no
ORG)
• Self-timed erase/write cycles (including
auto-erase)
• Automatic ERAL before WRAL
• Power-on/off data protection circuitry
• Industry standard 3-wire serial I/O
• Device Status signal (Ready/Busy)
• Sequential read function
• 1,000,000 E/W cycles
• Data retention > 200 years
• Pb-free and RoHS compliant
• Temperature ranges supported:
- Industrial (I)
-40°C to +85°C
-40°C to +125°C
- Automotive (E)
Pin Function Table
Name
Function
CS
Chip Select
CLK
DI
Serial Data Clock
Serial Data Input
Serial Data Output
Ground
DO
VSS
NC
No internal connection
Memory Configuration
Power Supply
ORG
VCC
© 2007 Microchip Technology Inc.
DS21794E-page 1
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
Package Types (not to scale)
ROTATED SOIC
PDIP/SOIC
(ex: 93LC46BX)
(P, SN)
NC
1
2
3
4
8
7
6
5
ORG*
CS
CLK
DI
VCC
NC
ORG
1
2
3
4
8
7
6
5
VCC
VSS
CS
DO
DI
*
CLK
DO
VSS
TSSOP/MSOP
(ST, MS)
SOT-23
(OT)
1
2
3
4
8
7
6
5
CS
CLK
DI
1
6
V
CC
NC
DO
V
CC
2
5
ORG*
VSS
CS
DO
VSS
3
4
DI
CLK
DFN
CS 1
VCC
8
7 NC
2
3
4
CLK
DI
DO
ORG*
VSS
6
5
* ORG pin is NC on A/B devices
DS21794E-page 2
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
1.0
ELECTRICAL CHARACTERISTICS
(†)
Absolute Maximum Ratings
VCC.............................................................................................................................................................................7.0V
All inputs and outputs w.r.t. VSS ..........................................................................................................-0.6V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied................................................................................................-40°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4 kV
†NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
TABLE 1-1:
DC CHARACTERISTICS
All parameters apply over the specified
ranges unless otherwise noted.
Industrial (I):
TA = -40°C to +85°C, VCC = +1.8V to +5.5V
Automotive (E): TA = -40°C to +125°C, VCC = +2.5V to +5.5V
Param.
No.
Symbol
Parameter
Min
Typ
Max
Units
Conditions
D1
VIH1
VIH2
High-level input voltage
2.0
0.7 VCC
—
—
VCC +1
VCC +1
V
V
VCC ≥ 2.7V
VCC < 2.7V
D2
D3
D4
VIL1
VIL2
Low-level input voltage
Low-level output voltage
High-level output voltage
-0.3
-0.3
—
—
0.8
0.2 VCC
V
V
VCC ≥ 2.7V
VCC < 2.7V
Vol1
Vol2
—
—
—
—
0.4
0.2
V
V
IOL = 2.1 mA, VCC = 4.5V
IOL = 100 μA, VCC = 2.5V
VOH1
VOH2
2.4
VCC - 0.2
—
—
—
—
V
V
IOH = -400 μA, VCC = 4.5V
IOH = -100 μA, VCC = 2.5V
D5
D6
D7
ILI
Input leakage current
Output leakage current
—
—
—
—
—
—
±1
±1
7
μA
μA
pF
VIN = VSS or VCC
ILO
VOUT = VSS or VCC
CIN,
COUT
Pin capacitance (all inputs/
outputs)
VIN/VOUT = 0V (Note 1)
TA = 25°C, FCLK = 1 MHz
D8
D9
ICC write Write current
—
—
—
500
2
—
mA FCLK = 3 MHz, Vcc = 5.5V
μA FCLK = 2 MHz, Vcc = 2.5V
mA FCLK = 3 MHz, VCC = 5.5V
ICC read Read current
—
—
—
—
—
100
1
500
—
μA
μA
FCLK = 2 MHz, VCC = 3.0V
FCLK = 2 MHz, VCC = 2.5V
D10
D11
ICCS
Standby current
—
—
—
—
1
5
μA
μA
I – Temp
E – Temp
CLK = CS = 0V
ORG = DI = VSS or VCC
(Note 2) (Note 3)
VPOR
VCC voltage detect
—
—
1.5
3.8
—
—
V
V
93AA56A/B/C, 93LC56A/B/C
(Note 1)
93C56A/B/C
Note 1: This parameter is periodically sampled and not 100% tested.
2: ORG pin not available on ‘A’ or ‘B’ versions.
3: Ready/Busy status must be cleared from DO, see Section 3.4 "Data Out (DO)".
© 2007 Microchip Technology Inc.
DS21794E-page 3
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
TABLE 1-2:
AC CHARACTERISTICS
All parameters apply over the specified
ranges unless otherwise noted.
Industrial (I):
TA = -40°C to +85°C, VCC = +1.8V TO +5.5V
Automotive (E): TA = -40°C to +125°C, VCC = +2.5V TO +5.5V
Param.
No.
Symbol
Parameter
Clock frequency
Min
Max
Units
Conditions
A1
FCLK
—
3
2
1
MHz 4.5V ≤ VCC < 5.5V, 93XX56C only
MHz 2.5V ≤ VCC < 5.5V
MHz 1.8V ≤ VCC < 2.5V
A2
A3
A4
TCKH
TCKL
TCSS
Clock high time
200
250
450
—
—
—
ns
ns
ns
4.5V ≤ VCC < 5.5V, 93XX56C only
2.5V ≤ VCC < 5.5V
1.8V ≤ VCC < 2.5V
Clock low time
100
200
450
ns
ns
ns
4.5V ≤ VCC < 5.5V, 93XX56C only
2.5V ≤ VCC < 5.5V
1.8V ≤ VCC < 2.5V
Chip Select setup time
50
100
250
ns
ns
ns
4.5V ≤ VCC < 5.5V
2.5V ≤ VCC < 4.5V
1.8V ≤ VCC < 2.5V
A5
A6
A7
TCSH
TCSL
TDIS
Chip Select hold time
Chip Select low time
Data input setup time
0
—
—
—
ns
ns
1.8V ≤ VCC < 5.5V
1.8V ≤ VCC < 5.5V
250
50
100
250
ns
ns
ns
4.5V ≤ VCC < 5.5V, 93XX56C only
2.5V ≤ VCC < 5.5V
1.8V ≤ VCC < 2.5V
A8
A9
TDIH
TPD
Data input hold time
50
100
250
—
ns
ns
ns
4.5V ≤ VCC < 5.5V, 93XX56C only
2.5V ≤ VCC < 5.5V
1.8V ≤ VCC < 2.5V
Data output delay time
—
200
250
400
ns
ns
ns
4.5V ≤ VCC < 5.5V, CL = 100 pF
2.5V ≤ VCC < 4.5V, CL = 100 pF
1.8V ≤ VCC < 2.5V, CL = 100 pF
A10
A11
TCZ
TSV
Data output disable time
Status valid time
—
—
100
200
ns
ns
4.5V ≤ VCC < 5.5V, (Note 1)
1.8V ≤ VCC < 4.5V, (Note 1)
200
300
500
ns
ns
ns
4.5V ≤ VCC < 5.5V, CL = 100 pF
2.5V ≤ VCC < 4.5V, CL = 100 pF
1.8V ≤ VCC < 2.5V, CL = 100 pF
A12
A13
TWC
TWC
Program cycle time
—
—
6
ms
Erase/Write mode (AA and LC
versions)
2
ms
Erase/Write mode
(93C versions)
A14
A15
A16
TEC
TWL
—
—
—
6
ms
ms
ERAL mode, 4.5V ≤ VCC ≤ 5.5V
WRAL mode, 4.5V ≤ VCC ≤ 5.5V
15
—
Endurance
1M
cycles 25°C, VCC = 5.0V, (Note 2)
Note 1: This parameter is periodically sampled and not 100% tested.
2: This application is not tested but ensured by characterization. For endurance estimates in a specific
application, please consult the Total Endurance™ Model which may be obtained from Microchip’s web site
at www.microchip.com.
DS21794E-page 4
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
FIGURE 1-1:
SYNCHRONOUS DATA TIMING
VIH
VIL
VIH
CS
TCSS
TCKH
TCKL
TCSH
CLK
VIL
TDIS
TDIH
VIH
VIL
DI
TCZ
TCZ
TPD
TPD
VOH
DO
(Read)
VOL
VOH
TSV
DO
(Program)
Status Valid
VOL
Note:
TSV is relative to CS.
TABLE 1-3: INSTRUCTION SET FOR X 16 ORGANIZATION (93XX56B OR 93XX56C WITH ORG = 1)
Instruction
SB Opcode
Address
Data In
Data Out Req. CLK Cycles
ERASE
ERAL
EWDS
EWEN
READ
WRITE
WRAL
1
1
1
1
1
1
1
11
00
00
00
10
01
00
X
1
0
1
X
X
0
A6 A5 A4 A3 A2 A1 A0
—
—
—
—
—
(RDY/BSY)
(RDY/BSY)
High-Z
11
11
11
11
27
27
27
0
0
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
High-Z
A6 A5 A4 A3 A2 A1 A0
D15 – D0
A6 A5 A4 A3 A2 A1 A0 D15 – D0 (RDY/BSY)
D15 – D0 (RDY/BSY)
1
X
X
X
X
X
X
TABLE 1-4: INSTRUCTION SET FOR X 8 ORGANIZATION (93XX56A OR 93XX56C WITH ORG = 0)
Req. CLK
Cycles
Instruction
SB Opcode
Address
Data In
Data Out
ERASE
ERAL
EWDS
EWEN
READ
WRITE
WRAL
1
1
1
1
1
1
1
11
00
00
00
10
01
00
X
1
0
1
X
X
0
A7 A6 A5 A4 A3 A2 A1 A0
—
—
—
—
—
(RDY/BSY)
(RDY/BSY)
High-Z
12
12
12
12
20
20
20
0
0
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
High-Z
A7 A6 A5 A4 A3 A2 A1 A0
D7 – D0
A7 A6 A5 A4 A3 A2 A1 A0 D7 – D0 (RDY/BSY)
D7 – D0 (RDY/BSY)
1
X
X
X
X
X
X
X
© 2007 Microchip Technology Inc.
DS21794E-page 5
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
2.2
Data In/Data Out (DI/DO)
2.0
FUNCTIONAL DESCRIPTION
It is possible to connect the Data In and Data Out pins
together. However, with this configuration it is possible
for a “bus conflict” to occur during the “dummy zero”
that precedes the read operation, if A0 is a logic high
level. Under such a condition the voltage level seen at
Data Out is undefined and will depend upon the relative
impedances of Data Out and the signal source driving
A0. The higher the current sourcing capability of A0,
the higher the voltage at the Data Out pin. In order to
limit this current, a resistor should be connected
between DI and DO.
When the ORG pin (93XX56C) pin is connected to
VCC, the (x16) organization is selected. When it is
connected to ground, the (x8) organization is selected.
Instructions, addresses and write data are clocked into
the DI pin on the rising edge of the clock (CLK). The DO
pin is normally held in a High-Z state except when read-
ing data from the device, or when checking the Ready/
Busy status during a programming operation. The
Ready/Busy status can be verified during an Erase/
Write operation by polling the DO pin; DO low indicates
that programming is still in progress, while DO high
indicates the device is ready. DO will enter the High-Z
state on the falling edge of CS.
2.3
Data Protection
All modes of operation are inhibited when VCC is below
a typical voltage of 1.5V for ‘93AA’ and ‘93LC’ devices
or 3.8V for ‘93C’ devices.
2.1
START Condition
The Start bit is detected by the device if CS and DI are
both high with respect to the positive edge of CLK for
the first time.
The EWEN and EWDS commands give additional
protection against accidentally programming during
normal operation.
Before a Start condition is detected, CS, CLK and DI
may change in any combination (except to that of a
Start condition), without resulting in any device
operation (Read, Write, Erase, EWEN, EWDS, ERAL
or WRAL). As soon as CS is high, the device is no
longer in Standby mode.
Note:
For added protection, an EWDS command
should be performed after every write
operation and an external 10 kΩ pull-down
protection resistor should be added to the
CS pin.
An instruction following a Start condition will only be
executed if the required opcode, address and data bits
for any particular instruction are clocked in.
After power-up, the device is automatically in the
EWDS mode. Therefore, an EWENinstruction must be
performed before the initial ERASEor WRITEinstruction
can be executed.
Note:
When preparing to transmit an instruction,
either the CLK or DI signal levels must be
at a logic low as CS is toggled active high.
Block Diagram
VCC
VSS
Address
Decoder
Memory
Array
Address
Counter
DO
Output
Buffer
Data Register
DI
Mode
Decode
Logic
ORG*
CS
Clock
Register
CLK
*ORG input is not available on A/B devices
DS21794E-page 6
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
The DO pin indicates the Ready/Busy status of the
device if CS is brought high after a minimum of 250 ns
2.4
Erase
The ERASEinstruction forces all data bits of the speci-
fied address to the logical ‘1’ state. CS is brought low
following the loading of the last address bit. This falling
edge of the CS pin initiates the self-timed program-
ming cycle, except on ‘93C’ devices where the rising
edge of CLK before the last address bit initiates the
write cycle.
low (TCSL). DO at logical ‘0’ indicates that programming
is still in progress. DO at logical ‘1’ indicates that the
register at the specified address has been erased and
the device is ready for another instruction.
Note:
After the Erase cycle is complete, issuing
a Start bit and then taking CS low will clear
the Ready/Busy status from DO.
FIGURE 2-1:
ERASE TIMING FOR 93AA AND 93LC DEVICES
TCSL
CS
Check Status
CLK
DI
1
1
1
AN
AN-1 AN-2
A0
•••
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TWC
FIGURE 2-2:
ERASE TIMING FOR 93C DEVICES
TCSL
CS
Check Status
CLK
DI
1
1
1
AN
AN-1 AN-2
A0
•••
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TWC
© 2007 Microchip Technology Inc.
DS21794E-page 7
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
The DO pin indicates the Ready/Busy status of the
device, if CS is brought high after a minimum of 250 ns
low (TCSL).
2.5
Erase All (ERAL)
The Erase All (ERAL) instruction will erase the entire
memory array to the logical ‘1’ state. The ERAL cycle
is identical to the erase cycle, except for the different
opcode. The ERAL cycle is completely self-timed and
commences at the falling edge of the CS, except on
‘93C’ devices where the rising edge of CLK before the
last data bit initiates the write cycle. Clocking of the
CLK pin is not necessary after the device has entered
the ERAL cycle.
Note:
After the ERAL command is complete,
issuing a Start bit and then taking CS low
will clear the Ready/Busy status from DO.
VCC must be ≥ 4.5V for proper operation of ERAL.
FIGURE 2-3:
ERAL TIMING FOR 93AA AND 93LC DEVICES
TCSL
CS
Check Status
CLK
DI
1
0
0
1
0
x
x
•••
TSV
TCZ
High-Z
DO
Busy
Ready
High-Z
VCC must be ≥ 4.5V for proper operation of ERAL.
TEC
FIGURE 2-4:
ERAL TIMING FOR 93C DEVICES
TCSL
CS
Check Status
CLK
DI
1
0
0
1
0
x
x
•••
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TEC
DS21794E-page 8
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
Once the EWEN instruction is executed, programming
remains enabled until an EWDSinstruction is executed
or Vcc is removed from the device.
2.6
Erase/Write Disable and Enable
(EWDS/EWEN)
The 93XX56A/B/C powers up in the Erase/Write
Disable (EWDS) state. All programming modes must be
preceded by an Erase/Write Enable (EWEN) instruction.
To protect against accidental data disturbance, the
EWDSinstruction can be used to disable all erase/write
functions and should follow all programming opera-
tions. Execution of a READinstruction is independent of
both the EWENand EWDSinstructions.
FIGURE 2-5:
EWDS TIMING
TCSL
CS
CLK
DI
•••
1
0
0
0
0
x
x
FIGURE 2-6:
EWEN TIMING
TCSL
CS
CLK
DI
•••
1
0
0
1
1
x
x
devices) output string. The output data bits will toggle on
the rising edge of the CLK and are stable after the spec-
ified time delay (TPD). Sequential read is possible when
CS is held high. The memory data will automatically cycle
to the next register and output sequentially.
2.7
Read
The READ instruction outputs the serial data of the
addressed memory location on the DO pin. A dummy
zero bit precedes the 8-bit (if ORG pin is low or A-Version
devices) or 16-bit (if ORG pin is high or B-version
FIGURE 2-7:
READ TIMING
CS
CLK
DI
•••
A0
An
1
1
0
High-Z
DO
0
Dx
D0
Dx
D0
Dx
D0
•••
•••
•••
© 2007 Microchip Technology Inc.
DS21794E-page 9
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
The DO pin indicates the Ready/Busy status of the
2.8
Write
device, if CS is brought high after a minimum of 250 ns
low (TCSL). DO at logical ‘0’ indicates that programming
is still in progress. DO at logical ‘1’ indicates that the
register at the specified address has been written with
the data specified and the device is ready for another
instruction.
The WRITE instruction is followed by 8 bits (if ORG is
low or A-version devices) or 16 bits (if ORG pin is high
or B-version devices) of data which are written into the
specified address. For 93AA56A/B/C and 93LC56A/B/C
devices, after the last data bit is clocked into DI, the
falling edge of CS initiates the self-timed auto-erase and
programming cycle. For 93C56A/B/C devices, the self-
timed auto-erase and programming cycle is initiated by
the rising edge of CLK on the last data bit.
Note:
After the Write cycle is complete, issuing a
Start bit and then taking CS low will clear
the Ready/Busy status from DO.
FIGURE 2-8:
WRITE TIMING FOR 93AA AND 93LC DEVICES
TCSL
CS
CLK
DI
0
1
1
An
A0
Dx
D0
•••
•••
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TWC
FIGURE 2-9:
WRITE TIMING FOR 93C DEVICES
TCSL
CS
CLK
DI
0
1
1
An
A0
Dx
D0
•••
•••
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TWC
DS21794E-page 10
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
The DO pin indicates the Ready/Busy status of the
device if CS is brought high after a minimum of 250 ns
2.9
Write All (WRAL)
The Write All (WRAL) instruction will write the entire
memory array with the data specified in the command.
For 93AA56A/B/C and 93LC56A/B/C devices, after the
last data bit is clocked into DI, the falling edge of CS
initiates the self-timed auto-erase and programming
cycle. For 93C56A/B/C devices, the self-timed auto-
erase and programming cycle is initiated by the rising
edge of CLK on the last data bit. Clocking of the CLK
pin is not necessary after the device has entered the
WRAL cycle. The WRAL command does include an
automatic ERAL cycle for the device. Therefore, the
WRALinstruction does not require an ERALinstruction,
but the chip must be in the EWEN status.
low (TCSL).
Note:
After the Write All cycle is complete,
issuing a Start bit and then taking CS low
will clear the Ready/Busy status from DO.
VCC must be ≥ 4.5V for proper operation of WRAL.
FIGURE 2-10:
WRAL TIMING FOR 93AA AND 93LC DEVICES
TCSL
CS
CLK
DI
0
0
1
x
1
0
•••
Dx
•••
x
D0
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TWL
VCC must be ≥ 4.5V for proper operation of WRAL.
FIGURE 2-11:
WRAL TIMING FOR 93C DEVICES
TCSL
CS
CLK
DI
0
0
1
x
1
0
•••
Dx
•••
x
D0
TSV
TCZ
High-Z
Busy
Ready
DO
High-Z
TWL
© 2007 Microchip Technology Inc.
DS21794E-page 11
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
3.0
PIN DESCRIPTIONS
TABLE 3-1:
Name
PIN DESCRIPTIONS
SOIC/PDIP/
MSOP/TSSOP/
DFN
SOT-23
Rotated SOIC
Function
CS
1
2
3
4
5
6
5
4
3
4
5
6
7
8
Chip Select
Serial Clock
Data In
CLK
DI
3
DO
1
Data Out
Ground
VSS
2
ORG/NC
—
Organization / 93XX56C
No Internal Connection / 93XX56A/B
NC
7
8
—
6
1
2
No Internal Connection
Power Supply
VCC
data bits before an instruction is executed. CLK and DI
then become “don’t care” inputs waiting for a new Start
condition to be detected.
3.1
Chip Select (CS)
A high level selects the device; a low level deselects
the device and forces it into Standby mode. However, a
programming cycle which is already in progress will be
completed, regardless of the Chip Select (CS) input
signal. If CS is brought low during a program cycle, the
device will go into Standby mode as soon as the
programming cycle is completed.
3.3
Data In (DI)
Data In (DI) is used to clock in a Start bit, opcode,
address and data synchronously with the CLK input.
3.4
Data Out (DO)
CS must be low for 250 ns minimum (TCSL) between
consecutive instructions. If CS is low, the internal
control logic is held in a Reset status.
Data Out (DO) is used in the Read mode to output data
synchronously with the CLK input (TPD after the
positive edge of CLK).
3.2
Serial Clock (CLK)
This pin also provides Ready/Busy status information
during erase and write cycles. Ready/Busy status infor-
mation is available on the DO pin if CS is brought high
after being low for minimum Chip Select low time (TCSL)
and an erase or write operation has been initiated.
The Serial Clock is used to synchronize the communi-
cation between a master device and the 93XX series
device. Opcodes, address and data bits are clocked in
on the positive edge of CLK. Data bits are also clocked
out on the positive edge of CLK.
The Status signal is not available on DO, if CS is held
low during the entire erase or write cycle. In this case,
DO is in the High-Z mode. If status is checked after the
erase/write cycle, the data line will be high to indicate
the device is ready.
CLK can be stopped anywhere in the transmission
sequence (at high or low level) and can be continued
anytime with respect to Clock High Time (TCKH) and
Clock Low Time (TCKL). This gives the controlling
master freedom in preparing opcode, address and
data.
Note:
After a programming cycle is complete,
issuing a Start bit and then taking CS low
will clear the Ready/Busy status from DO.
CLK is a “don’t care” if CS is low (device deselected). If
CS is high, but the Start condition has not been
detected (DI = 0), any number of clock cycles can be
received by the device without changing its status (i.e.,
waiting for a Start condition).
3.5
Organization (ORG)
When the ORG pin is connected to VCC or Logic HI, the
(x16) memory organization is selected. When the ORG
pin is tied to VSS or Logic LO, the (x8) memory
organization is selected. For proper operation, ORG
must be tied to a valid logic level.
CLK cycles are not required during the self-timed write
(i.e., auto erase/write) cycle.
After detection of a Start condition the specified number
of clock cycles (respectively low-to-high transitions of
CLK) must be provided. These clock cycles are
required to clock in all required opcode, address and
93XX56A devices are always x8 organization and
93XX56B devices are always x16 organization.
DS21794E-page 12
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
4.0
4.1
PACKAGING INFORMATION
Package Marking Information
8-Lead MSOP (150 mil)
Example:
3L56BI
5281L7
XXXXXXT
YWWNNN
Example:
2EL7
6-Lead SOT-23
XXNN
Example:
93LC56B
8-Lead PDIP
XXXXXXXX
T/XXXNNN
I/P
1L7
e
3
0528
YYWW
Example:
93LC56BI
8-Lead SOIC
XXXXXXXT
SN
0528
XXXXYYWW
e
3
1L7
NNN
Example:
8-Lead TSSOP
L56B
I528
1L7
XXXX
TYWW
NNN
Example:
8-Lead 2x3 DFN
344
528
L7
XXX
YWW
NN
© 2007 Microchip Technology Inc.
DS21794E-page 13
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
1st Line Marking Codes
Part Number
SOT-23
DFN
TSSOP
MSOP
I Temp.
E Temp.
—
I Temp.
331
E Temp.
—
93AA56A
93AA56B
93AA56C
93LC56A
93LC56B
93LC56C
93C56A
A56A
A56B
A56C
L56A
L56B
L56C
C56A
C56B
C56C
3A56AT
3A56BT
3A56CT
3L56AT
3L56BT
3L56CT
3C56AT
3C56BT
3C56CT
2BNN
2LNN
—
—
341
—
—
351
—
2ENN
2PNN
—
2FNN
2RNN
—
334
335
345
355
338
348
358
344
354
2HNN
2TNN
—
2JNN
2UNN
—
337
93C56B
347
93C56C
357
Note:
T = Temperature grade (I, E)
NN = Alphanumeric traceability code
Legend: XX...X Part number or part number code
T
Temperature (I, E)
Y
Year code (last digit of calendar year)
Year code (last 2 digits of calendar year)
Week code (week of January 1 is week ‘01’)
Alphanumeric traceability code (2 characters for small packages)
Pb-free JEDEC designator for Matte Tin (Sn)
YY
WW
NNN
e
3
Note: For very small packages with no room for the Pb-free JEDEC designator
, the marking will only appear on the outer carton or reel label.
3
e
Note: In the event the full Microchip part number cannot be marked on one line, it will
be carried over to the next line, thus limiting the number of available
characters for customer-specific information.
DS21794E-page 14
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
8-Lead Plastic Micro Small Outline Package (MS or UA) [MSOP]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
D
N
E
E1
NOTE 1
2
b
1
e
c
φ
A2
A
L
L1
A1
Units
MILLIMETERS
Dimension Limits
MIN
NOM
MAX
Number of Pins
Pitch
N
e
8
0.65 BSC
Overall Height
A
–
–
1.10
0.95
0.15
Molded Package Thickness
Standoff
A2
A1
E
0.75
0.00
0.85
–
4.90 BSC
3.00 BSC
3.00 BSC
0.60
Overall Width
Molded Package Width
Overall Length
Foot Length
E1
D
L
0.40
0.80
Footprint
L1
φ
0.95 REF
–
Foot Angle
0°
8°
Lead Thickness
c
0.08
–
0.23
0.40
Lead Width
b
0.22
–
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15 mm per side.
3. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
Microchip Technology Drawing C04-111B
© 2007 Microchip Technology Inc.
DS21794E-page 15
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
6-Lead Plastic Small Outline Transistor (CH or OT) [SOT-23]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
b
4
N
E
E1
PIN 1 ID BY
LASER MARK
1
2
3
e
e1
D
c
A
φ
A2
L
A1
L1
Units
MILLIMETERS
Dimension Limits
MIN
NOM
MAX
Number of Pins
Pitch
N
e
6
0.95 BSC
Outside Lead Pitch
Overall Height
e1
A
1.90 BSC
0.90
0.89
0.00
2.20
1.30
2.70
0.10
0.35
0°
–
–
–
–
–
–
–
–
–
–
–
1.45
1.30
0.15
3.20
1.80
3.10
0.60
0.80
30°
Molded Package Thickness
Standoff
A2
A1
E
Overall Width
Molded Package Width
Overall Length
Foot Length
E1
D
L
Footprint
L1
φ
Foot Angle
Lead Thickness
Lead Width
c
0.08
0.20
0.26
0.51
b
Notes:
1. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.127 mm per side.
2. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
Microchip Technology Drawing C04-028B
DS21794E-page 16
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
8-Lead Plastic Dual In-Line (P or PA) – 300 mil Body [PDIP]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
N
NOTE 1
E1
3
1
2
D
E
A2
A
L
A1
c
e
eB
b1
b
Units
INCHES
Dimension Limits
MIN
NOM
8
MAX
Number of Pins
Pitch
N
e
.100 BSC
–
Top to Seating Plane
A
–
.210
.195
–
Molded Package Thickness
Base to Seating Plane
Shoulder to Shoulder Width
Molded Package Width
Overall Length
A2
A1
E
.115
.015
.290
.240
.348
.115
.008
.040
.014
–
.130
–
.310
.250
.365
.130
.010
.060
.018
–
.325
.280
.400
.150
.015
.070
.022
.430
E1
D
Tip to Seating Plane
Lead Thickness
L
c
Upper Lead Width
b1
b
Lower Lead Width
Overall Row Spacing §
eB
Notes:
1. Pin 1 visual index feature may vary, but must be located with the hatched area.
2. § Significant Characteristic.
3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" per side.
4. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
Microchip Technology Drawing C04-018B
© 2007 Microchip Technology Inc.
DS21794E-page 17
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
8-Lead Plastic Small Outline (SN or OA) – Narrow, 3.90 mm Body [SOIC]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
D
e
N
E
E1
NOTE 1
1
2
3
α
h
b
h
c
φ
A2
A
L
A1
L1
β
Units
MILLIMETERS
Dimension Limits
MIN
NOM
MAX
Number of Pins
Pitch
N
e
8
1.27 BSC
Overall Height
A
–
–
1.75
–
Molded Package Thickness
Standoff
A2
A1
E
1.25
0.10
–
§
–
0.25
Overall Width
6.00 BSC
Molded Package Width
Overall Length
Chamfer (optional)
Foot Length
E1
D
h
3.90 BSC
4.90 BSC
0.25
0.40
–
0.50
1.27
L
–
Footprint
L1
φ
1.04 REF
Foot Angle
0°
0.17
0.31
5°
–
–
–
–
–
8°
Lead Thickness
Lead Width
c
0.25
0.51
15°
b
Mold Draft Angle Top
Mold Draft Angle Bottom
α
β
5°
15°
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. § Significant Characteristic.
3. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15 mm per side.
4. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
Microchip Technology Drawing C04-057B
DS21794E-page 18
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
8-Lead Plastic Thin Shrink Small Outline (ST) – 4.4 mm Body [TSSOP]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
D
N
E
E1
NOTE 1
1
2
b
e
c
φ
A
A2
A1
L
L1
Units
MILLIMETERS
Dimension Limits
MIN
NOM
MAX
Number of Pins
Pitch
N
e
8
0.65 BSC
Overall Height
A
–
–
1.20
1.05
0.15
Molded Package Thickness
Standoff
A2
A1
E
0.80
0.05
1.00
–
Overall Width
6.40 BSC
Molded Package Width
Molded Package Length
Foot Length
E1
D
4.30
2.90
0.45
4.40
4.50
3.10
0.75
3.00
L
0.60
Footprint
L1
φ
1.00 REF
Foot Angle
0°
–
–
–
8°
Lead Thickness
Lead Width
c
0.09
0.19
0.20
0.30
b
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15 mm per side.
3. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
Microchip Technology Drawing C04-086B
© 2007 Microchip Technology Inc.
DS21794E-page 19
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
8-Lead Plastic Dual Flat, No Lead Package (MC) – 2x3x0.9 mm Body [DFN]
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
e
D
b
N
N
L
K
E2
E
EXPOSED PAD
NOTE 1
NOTE 1
2
1
1
2
D2
BOTTOM VIEW
TOP VIEW
A
NOTE 2
A3
A1
Units
MILLIMETERS
Dimension Limits
MIN
NOM
8
MAX
Number of Pins
Pitch
N
e
0.50 BSC
0.90
Overall Height
Standoff
A
0.80
0.00
1.00
0.05
A1
A3
D
0.02
Contact Thickness
Overall Length
Overall Width
0.20 REF
2.00 BSC
3.00 BSC
–
E
Exposed Pad Length
Exposed Pad Width
Contact Width
Contact Length
Contact-to-Exposed Pad
D2
E2
b
1.30
1.50
0.18
0.30
0.20
1.75
1.90
0.30
0.50
–
–
0.25
L
0.40
K
–
Notes:
1. Pin 1 visual index feature may vary, but must be located within the hatched area.
2. Package may have one or more exposed tie bars at ends.
3. Package is saw singulated.
4. Dimensioning and tolerancing per ASME Y14.5M.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
REF: Reference Dimension, usually without tolerance, for information purposes only.
Microchip Technology Drawing C04-123B
DS21794E-page 20
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
APPENDIX A: REVISION HISTORY
Revision B
Corrections to Section 1.0, Electrical Characteristics.
Section 4.1, 6-Lead SOT-23 package to OT.
Revision C
Added DFN package.
Revision D (11/2006)
Updated Package Drawings and Product ID System
Revision E (3/2007)
Replaced Package Drawings; Revised Product ID
System (SOIC-SN package).
© 2007 Microchip Technology Inc.
DS21794E-page 21
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
NOTES:
DS21794E-page 22
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
THE MICROCHIP WEB SITE
CUSTOMER SUPPORT
Microchip provides online support via our WWW site at
www.microchip.com. This web site is used as a means
to make files and information easily available to
customers. Accessible by using your favorite Internet
browser, the web site contains the following
information:
Users of Microchip products can receive assistance
through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
• Product Support – Data sheets and errata,
application notes and sample programs, design
resources, user’s guides and hardware support
documents, latest software releases and archived
software
• Development Systems Information Line
Customers
should
contact
their
distributor,
representative or field application engineer (FAE) for
support. Local sales offices are also available to help
customers. A listing of sales offices and locations is
included in the back of this document.
• General Technical Support – Frequently Asked
Questions (FAQ), technical support requests,
online discussion groups, Microchip consultant
program member listing
Technical support is available through the web site
at: http://support.microchip.com
• Business of Microchip – Product selector and
ordering guides, latest Microchip press releases,
listing of seminars and events, listings of
Microchip sales offices, distributors and factory
representatives
CUSTOMER CHANGE NOTIFICATION
SERVICE
Microchip’s customer notification service helps keep
customers current on Microchip products. Subscribers
will receive e-mail notification whenever there are
changes, updates, revisions or errata related to a
specified product family or development tool of interest.
To register, access the Microchip web site at
www.microchip.com, click on Customer Change
Notification and follow the registration instructions.
© 2007 Microchip Technology Inc.
DS21794E-page 23
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
READER RESPONSE
It is our intention to provide you with the best documentation possible to ensure successful use of your Microchip prod-
uct. If you wish to provide your comments on organization, clarity, subject matter, and ways in which our documentation
can better serve you, please FAX your comments to the Technical Publications Manager at (480) 792-4150.
Please list the following information, and use this outline to provide us with your comments about this document.
To:
Technical Publications Manager
Reader Response
Total Pages Sent ________
RE:
From:
Name
Company
Address
City / State / ZIP / Country
Telephone: (_______) _________ - _________
FAX: (______) _________ - _________
Application (optional):
Would you like a reply?
Y
N
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
DS21794E
Literature Number:
Device:
Questions:
1. What are the best features of this document?
2. How does this document meet your hardware and software development needs?
3. Do you find the organization of this document easy to follow? If not, why?
4. What additions to the document do you think would enhance the structure and subject?
5. What deletions from the document could be made without affecting the overall usefulness?
6. Is there any incorrect or misleading information (what and where)?
7. How would you improve this document?
DS21794E-page 24
© 2007 Microchip Technology Inc.
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
/XX
PART NO.
Device
X
X
X
Examples:
a)
b)
c)
93AA56C-I/MS: 2K, 256x8 or 128x16 Serial
EEPROM, MSOP package, 1.8V
93AA56B-I/MS: 2K, 128x16 Serial EEPROM,
MSOP package, 1.8V
Package
Tape & Reel Temperature
Range
Pinout
93AA56AT-I/OT: 2K, 256x8 Serial EEPROM,
SOT-23 package, tape and reel, 1.8V
Device:
93AA56A: 2K 1.8V Microwire Serial EEPROM
93AA56B: 2K 1.8V Microwire Serial EEPROM
93AA56C: 2K 1.8V Microwire Serial EEPROM w/ORG
d)
93AA56CT-I/MS: 2K, 256x8 or 128x16 Serial
EEPROM, MSOP package, tape and reel, 1.8V
93LC56A: 2K 2.5V Microwire Serial EEPROM
93LC56B: 2K 2.5V Microwire Serial EEPROM
93LC56C: 2K 2.5V Microwire Serial EEPROM w/ORG
a)
b)
93LC56A-I/MS: 2K, 256x8 Serial EEPROM,
MSOP package, 2.5V
93LC56BT-I/OT: 2K, 128x16 Serial EEPROM,
SOT-23 package, tape and reel, 2.5V
93C56A: 2K 5.0V Microwire Serial EEPROM
93C56B: 2K 5.0V Microwire Serial EEPROM
93C56C: 2K 5.0V Microwire Serial EEPROM w/ORG
c)
93LC56B-I/MS: 2K, 128x16 Serial EEPROM,
MSOP package, 2.5V
Pinout:
Blank
X
=
=
Standard pinout
Rotated pinout
a)
b)
c)
93C56B-I/MS: 2K, 128x16 Serial EEPROM,
MSOP package, 5.0V
93C56C-I/MS: 2K, 256x8 or 128x16 Serial
EEPROM, MSOP package, 5.0V
93C56AT-I/OT: 2K, 256x8 Serial EEPROM,
SOT-23 package, tape and reel, 5.0V
Tape & Reel:
Blank
T
=
=
Standard packaging
Tape & Reel
Temperature Range:
Package:
I
E
=
=
-40°C to +85°C
-40°C to +125°C
MS
OT
P
SN
ST
MC
=
=
=
=
=
=
Plastic MSOP (Micro Small outline, 8-lead)
SOT-23, 6-lead (Tape & Reel only)
Plastic DIP (300 mil body), 8-lead
Plastic SOIC (3.90 mm body), 8-lead
TSSOP, 8-lead
2x3 DFN, 8-lead
© 2007 Microchip Technology Inc.
DS21794E-page 25
93AA56A/B/C, 93LC56A/B/C, 93C56A/B/C
NOTES:
DS21794E-page 26
© 2007 Microchip Technology Inc.
Note the following details of the code protection feature on Microchip devices:
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
•
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
•
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
•
•
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, Accuron,
dsPIC, KEELOQ, KEELOQ logo, microID, MPLAB, PIC,
PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and
SmartShunt are registered trademarks of Microchip
Technology Incorporated in the U.S.A. and other countries.
AmpLab, FilterLab, Linear Active Thermistor, Migratable
Memory, MXDEV, MXLAB, PS logo, SEEVAL, SmartSensor
and The Embedded Control Solutions Company are
registered trademarks of Microchip Technology Incorporated
in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, ECAN,
ECONOMONITOR, FanSense, FlexROM, fuzzyLAB,
In-Circuit Serial Programming, ICSP, ICEPIC, Mindi, MiWi,
MPASM, MPLAB Certified logo, MPLIB, MPLINK, PICkit,
PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal,
PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB,
rfPICDEM, Select Mode, Smart Serial, SmartTel, Total
Endurance, UNI/O, WiperLock and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2007, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona, Gresham, Oregon and Mountain View, California. The
Company’s quality system processes and procedures are for its PIC®
MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial
EEPROMs, microperipherals, nonvolatile memory and analog
products. In addition, Microchip’s quality system for the design and
manufacture of development systems is ISO 9001:2000 certified.
© 2007 Microchip Technology Inc.
DS21794E-page 27
WORLDWIDE SALES AND SERVICE
AMERICAS
ASIA/PACIFIC
ASIA/PACIFIC
EUROPE
Corporate Office
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Habour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
India - Bangalore
Tel: 91-80-4182-8400
Fax: 91-80-4182-8422
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://support.microchip.com
Web Address:
www.microchip.com
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
India - Pune
Tel: 91-20-2566-1512
Fax: 91-20-2566-1513
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Japan - Yokohama
Tel: 81-45-471- 6166
Fax: 81-45-471-6122
China - Beijing
Tel: 86-10-8528-2100
Fax: 86-10-8528-2104
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Korea - Gumi
Tel: 82-54-473-4301
Fax: 82-54-473-4302
Boston
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Korea - Seoul
China - Fuzhou
Tel: 86-591-8750-3506
Fax: 86-591-8750-3521
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
China - Hong Kong SAR
Tel: 852-2401-1200
Fax: 852-2401-3431
Malaysia - Penang
Tel: 60-4-646-8870
Fax: 60-4-646-5086
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
UK - Wokingham
Tel: 44-118-921-5869
Fax: 44-118-921-5820
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Detroit
Farmington Hills, MI
Tel: 248-538-2250
Fax: 248-538-2260
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Kokomo
Kokomo, IN
Tel: 765-864-8360
Fax: 765-864-8387
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
Taiwan - Hsin Chu
Tel: 886-3-572-9526
Fax: 886-3-572-6459
China - Shenzhen
Tel: 86-755-8203-2660
Fax: 86-755-8203-1760
Taiwan - Kaohsiung
Tel: 886-7-536-4818
Fax: 886-7-536-4803
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
China - Shunde
Tel: 86-757-2839-5507
Fax: 86-757-2839-5571
Taiwan - Taipei
Tel: 886-2-2500-6610
Fax: 886-2-2508-0102
Santa Clara
Santa Clara, CA
Tel: 408-961-6444
Fax: 408-961-6445
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
Toronto
Mississauga, Ontario,
Canada
Tel: 905-673-0699
Fax: 905-673-6509
China - Xian
Tel: 86-29-8833-7250
Fax: 86-29-8833-7256
12/08/06
DS21794E-page 28
© 2007 Microchip Technology Inc.
相关型号:
93C56AX-E/MSG
256 X 8 MICROWIRE BUS SERIAL EEPROM, PDSO8, LEAD FREE, PLASTIC, MO-187, MSOP-8
MICROCHIP
93C56AX-E/PG
256 X 8 MICROWIRE BUS SERIAL EEPROM, PDIP8, 0.300 INCH, LEAD FREE, PLASTIC, MS-001, DIP-8
MICROCHIP
93C56AX-I/MSG
256 X 8 MICROWIRE BUS SERIAL EEPROM, PDSO8, LEAD FREE, PLASTIC, MO-187, MSOP-8
MICROCHIP
93C56AX-I/PG
256 X 8 MICROWIRE BUS SERIAL EEPROM, PDIP8, 0.300 INCH, LEAD FREE, PLASTIC, MS-001, DIP-8
MICROCHIP
©2020 ICPDF网 联系我们和版权申明