UHP-2500-36PM [MEANWELL]
2500W Conduction Cooling with PFC Switching Supply;型号: | UHP-2500-36PM |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 2500W Conduction Cooling with PFC Switching Supply 功率因数校正 |
文件: | 总7页 (文件大小:346K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2500W Conduction Cooling with PFC Switching Supply
UHP-2500 series
UL62368-1
TPTC004 IEC62368-1
■ Features
ꢀSlim and Low profile (60mm)
■ Certificates
ꢀSafety: UL/EN62368-1
ꢀEMC: EN55032 / 55024
ꢀFanless and conduction-cooled design
ꢀBuilt-in active PFC function
ꢀ-3 ~0+ 7℃0 working temperature
ꢀOutput voltage and constant current level programmable
ꢀProtections: Short circuit / Overload / Over voltage
/ Over temperature
■ Applications
ꢀIndustrial automation machinery
ꢀIndustrial control system
ꢀMechanical and electrical equipment
ꢀElectronic instruments, equipment
or apparatus
ꢀBuilt-in remote ON-OFF control
ꢀDC OK active signal
ꢀOperating altitude up to 5000 meter (Note.7)
ꢀLED indicator for power on
ꢀTest and measurement instrument
ꢀLaser related machine
ꢀOptional PMBus or CANBus protocol
ꢀ5 years warranty
ꢀCharging related equipment
ꢀHousehold appliances
■ Description
UHP-2500 series is a 2500W single-output slim type power supply with 60mm of low profile design.
Adopting the full range 90~264VAC input, the entire series provides an output voltage line of 24V, 36V and 48V.
In addition to the high efficiency up to 96%, that the whole series operates from -30℃~ 70℃ under air
convection without fan. UHP-2500 has the complete protection functions and 2G anti-vibration capability;
It is complied with the international safety regulations such as TUV EN62368-1, UL62368-1, and design
refers to EN61558-1 and EN60335-1. UHP-2500 series serves as a high performance power supply solution
for various industrial applications.
■ Model Encoding
UHP - 2500 - 24
Communication protocol option
Output voltage(24V/36V/48V)
Rated wattage
Series name
Type
Blank
PM
Communication Protocol
None
Note
In Stock
PMBus protocol
CANBus protocol
By request
By request
CAN
File Name:UHP-2500-SPEC 2019-10-18
2500W Conduction Cooling with PFC Switching Supply
UHP-2500 series
SPECIFICATION
MODEL
UHP-2500-24
UHP-2500-36
UHP-2500-48
36V
48V
DC VOLTAGE
24V
RATED CURRENT
104.2A
69.4A
52.1A
RATED POWER
2500.8W
2498.4W
360mVp-p
2500.8W
480mVp-p
RIPPLE & NOISE (max.) Note.2
300mVp-p
By built-in potentiometer, SVR
VOLTAGE ADJ. RANGE
OUTPUT
36~43.2V
1.0%
48~57.6V
1.0%
24~28.8V
1.0%
VOLTAGE TOLERANCE Note.3
LINE REGULATION
0.5%
0.5%
0.5%
1.0%
1.0%
0.5%
LOAD REGULATION
SETUP, RISE TIME
1800ms, 60ms/230VAC at full load
HOLD UP TIME (Typ.)
VOLTAGE RANGE
16ms/230VAC at 75% load
10ms/230VAC at full load
Note.4 90 ~ 264VAC
47 ~ 63Hz
250 ~ 370VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
PF≥0.95/230VAC at full load
95%
INPUT
95.5%
96%
14.3A/230VAC
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
Cold start 60A/230VAC
<0.75mA / 240VAC
105 ~ 115% rated output power
OVERLOAD
Protection type : Constant current limiting, unit will shutdown after 5 sec. re-power on to recover.
30 ~ 35V
45 ~ 51V 60 ~ 67V
Protection type :Shut down O/P voltage,re-power on to recover
PROTECTION
FUNCTION
ENVIRONMENT
OVER VOLTAGE
OVER TEMPERATURE
Protection type :Shut down O/P voltage, recovers automatically after temperature goes down
Adjustment of output voltage is allowable to 50 ~ 120% of nominal output voltage
Please refer to the Function Manual.
OUTPUT VOLTAGE
PROGRAMMABLE(PV) Note 5
Adjustment of constant current level is allowable to 20 ~ 100% of rated current.
Please refer to the Function Manual.
OUTPUT CURRENT
PROGRAMMABLE(PC) Note 5
Power ON : Short circuit
Power OFF : Open circuit
REMOTE ON/OFF CONTROL
AUXILIARY POWER
DC-OK SIGNAL
12V@0.4A tolerance 10%, ripple 150mVp-p
The TTL signal out, PSU turn on = 4.5 ~ 5.5V ; PSU turn off = -0.5 ~ 0.5V. Please refer to the Function Manual.
-30 ~ +70℃(Refer to “Derating Curve")
WORKING TEMP.
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +85℃, 10 ~ 95% RH non-condensing
0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
UL62368-1,TUV EN62368-1, EAC TP TC 004 approved; design refers to EN61558-1, EN60335-1(by request)
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25℃/ 70%RH
Parameter
Conducted
Standard
Test Level / Note
Class B
EN55032 (CISPR32)
EN55032 (CISPR32)
EN61000-3-2
Radiated
Class A
EMC EMISSION
Harmonic Current
Voltage Flicker
EN55024 , EN61000-6-2
Parameter
ESD
Class A
EN61000-3-3
-----
SAFETY &
EMC
(Note.6)
Standard
Test Level / Note
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-6-2
EN61000-4-6
EN61000-4-8
Level 3, 8KV air ; Level 2, 4KV contact
Radiated
Level 3
EFT / Burst
Surge
Level 3
EMC IMMUNITY
2KV/Line-Line 4KV/Line-Earth
Conducted
Level 3
Level 4
Magnetic Field
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
Voltage Dips and Interruptions
EN61000-4-11
MTBF
166.12K hrs min. Telcordia SR-332 (Bellcore) ; 48.91K hrs min. MIL-HDBK-217F (25℃)
OTHERS
NOTE
310*140*60mm (L*W*H)
DIMENSION
PACKING
3.5kg; 4pcs/15kg/1.76CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance :includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the derating curve for more details.
5. PV/PC functions when users do not use SVR.
6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a 1100mm*650mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
File Name:UHP-2500-SPEC 2019-10-18
2500W Conduction Cooling with PFC Switching Supply
UHP-2500 series
BLOCK DIAGRAM
PFC fosc : 80KHz
PWM fosc : 55KHz
ACTIVE
INRUSH
CURRENT
LIMITING
RECTIFIERS
RECTIFIERS
&
FILTER
+V
-V
POWER
EMI
FILTER
I/P
&
PFC
SWITCHING
O.V.P.
DETECTION
CIRCUIT
PV
PC
PWM
CONTROL
PFC
CONTROL
O.T.P.
MCU
DETECTION
CIRCUIT
DC OK
DATA
ISOLATION
MCU
Remote ON-OFF
O.T.P.
PM BUS
or
DATA
ISOLATION
5V
RECTIFIERS
&
FILTER
AUX
POWER
CAN BUS
(Optional)
12V/0.4A
AUX POWER
EFFICIENCY VS LOAD (48V MODEL)
STATIC CHARACTERISTIC
100
95
90
85
80
75
70
65
60
100
90
80
70
60
50
40
115VAC
230VAC
10%
20%
30%
40%
50%
60%
65%
80%
90%
100%
110
120
140 160 180
220
240 264
90 100
200
LOAD
INPUT VOLTAGE (V) 60Hz
DERATING CURVE
230VAC
100
100
80
Input only
80
60
230VAC
230VAC
Input only
60
50
40
110VAC
40
30
20
20
-30
-25 -10
0
20
40
50
60
70
-30
-25 -10
0
20
40 45 50
60 65 70
(HORIZONTAL)
(HORIZONTAL)
AMBIENT TEMPERATURE WITH ADDITIONAL ALUMINUM PLATE(℃)
(450x450x3mm)
AMBIENT TEMPERATURE WITH 45CFM FAN(℃)
100
100
80
230VAC
Input only
80
60
60
40
40
30
20
20
-30
-25 -10
0
20
40 45 50
60
70
(HORIZONTAL)
(HORIZONTAL)
75
-30
-25
-10
0
15
30
50
60
Tcase (℃)
AMBIENT TEMPERATURE WITHOUT ALUMINUM PLATE(℃)
File Name:UHP-2500-SPEC 2019-10-18
2500W Conduction Cooling with PFC Switching Supply
UHP-2500 series
FUNCTION MANUAL
1.Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim)
※ In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed by applying EXTERNAL VOLTAGE.
CN71
PIN1 PV
EXTERNAL
VOLTAGE (DC)
PIN3 & 4 -GND-signal
Vout
120
100
100
83.3
80
Non-Linear
60
40
50
20
V
V
50
90
100
110
120
0
0.4
1
4.74.8
OUTPUT VOLTAGE (%)
◎ The rated current should change with the Output Voltage Programming accordingly.
EXTERNAL VOLTAGE (DC)
2.Constant Current Programming (or, PC / remote current programming / dynamic current trim)
※ The output current can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE.
CN71
PIN2 PC
EXTERNAL
VOLTAGE (DC)
PIN3 & 4 -GND-signal
※ Covered by over temperature protection, auto de-rating function works under operation either in PC mode or under control by communication protocol.
T1(Typ.): Maximum ambient temperature of full load.
T2(Typ.): T1+5℃.
Iout
100
80
110
100
Non-Linear
Non-Linear
60
50
40
20
20
V
0
0.4
1
4.7 4.8
T1
T2
(HORIZONTAL)
AMBIENT TEMPERATURE (℃)
EXTERNAL VOLTAGE (DC)
File Name:UHP-2500-SPEC 2019-10-18
2500W Conduction Cooling with PFC Switching Supply
UHP-2500 series
3.Remote ON-OFF Control
The power supply can be turned ON/OFF individually or along with other units in parallel by using the "Remote ON-OFF" function.
Remote ON-OFF
Short circuit
Power Supply Status
CN71
ON
PIN5 Remote ON-OFF
PIN7 & 8 +12V-AUX
Open circuit
OFF
4.DC-OK Signal
DC-OK signal is a TTL level signal. The maximum sourcing current is 10mA.
DC-OK signal
Power Supply Status
CN71
PIN6 DC OK
“High” >4.5~5.5V
“Low” <-0.5~0.5V
ON
OFF
PIN9 & 10 GND-AUX
5.PMBus Communication Interface
UHP-2500 supports PMBus Rev. 1.2 with maximum 100KHz bus speed, allowing information reading, status monitoring, output trimming, etc. For details,
please refer to the Function Manual.
File Name:UHP-2500-SPEC 2019-10-18
2500W Conduction Cooling with PFC Switching Supply
UHP-2500 series
MECHANICAL SPECIFICATION
Case No.276A
Unit:mm
310
302
4
TB2
TB3
2-M6
3
2 TB1
1
DIP SW
LED
SVR
CN71
1
2
11
12
1 2 3
4-ψ4.5 L=10
(Optional)
155
tc
ꢀtc : Max. Case Temperature
DC Output Terminal(TB2,TB3) Pin NO. Assignment
AC Input Terminal(TB1) Pin NO. Assignment
Pin No. Assignment
Max mounting torque
Pin No. Assignment
Terminal
Terminal
Max mounting torque
1
2
3
AC/L
AC/N
TB2
TB3
+V
-V
(MW)
HS147
8Kgf-cm
DECA T36
13Kgf-cm
※DIP SW(Optional):
Pin No.
Function
Description
1
2
3
A0
A1
A2
PMBus / CANBus interface address switch.
※Control Pin No. Assignment(CN71) : HRS DF11-12DP-2DS or equivalent
2
1
Mating Housing
Terminal
HRS DF11-12DS or equivalent
HRS DF11-**SC or equivalent
12 11
Pin No.
Function
PV
Description
1
2
Connection for output voltage programming.(Note1)
PC
Connection for constant current level programming.(Note.1)
3,4
GND (Signal) Negative output voltage signal.
The unit can turn the output ON/OFF by dry contact between Remote ON/OFF and 12-AUX.(Note.2)
Short (10.8 ~ 13.2V) : Power ON ; Open(-0.5 ~ 0.5V) : Power OFF ; The maximum input voltage is 13.2V
Low (-0.5 ~ 0.5V) : When the Vout≦77% 6%.
Remote
ON-OFF
5
6
DC-OK
High (4.5 ~ 5.5V) : When Vout≧80% 6%.
The maximum sourcing current is 10mA and only for output.(Note.2)
Auxiliary voltage output, 10.8~13.2V, referenced to GND-AUX (pin3 & 4).
The maximum load current is 0.4A. This output is not controlled by “Remote ON-OFF”.
Auxiliary voltage output GND.
7,8
9,10
11
+12V-AUX
GND-AUX
The signal return is isolated from the output terminals (+V & -V).
For PMBus model: Serial Data used in the PMBus interface. (Note.2)
For CANBus model: Data line used in CANBus interface. (Note.2)
For PMBus model: Serial Clock used in the PMBus interface. (Note.2)
For CANBus model: Data line used in CANBus interface. (Note.2)
SDA
CANH
SCL
12
CANL
Note1: Non-isolated signal, referenced to [GND(signal)].
Note2: Isolated signal, referenced to GND-AUX.
File Name:UHP-2500-SPEC 2019-10-18
2500W Conduction Cooling with PFC Switching Supply
UHP-2500 series
Operate with additional aluminum plate and fan
In order to meet the “Derating Curve” and the “Static Characteristics” , UHP-2500 series can be installed onto an aluminum plate(or the cabinet of the same size)
on the bottom or apply forced air cooled solution. The size of the suggested aluminum plate and configuration of fan are shown as below. And for optimizing
thermal performance, the aluminum plate must have an even and smooth surface (or coated with thermal grease), and UHP-2500 series must be firmly mounted
at the center of the aluminum plate.
unit:mm
M4*4
450
450
155mm
45CFM
FAN
Air flow
direction
TB2
TB3
3
2 TB1
1
DIP SW
SVR
1 2 3
(Optional)
File Name:UHP-2500-SPEC 2019-10-18
相关型号:
UHP-28.2/12-D48N
DC-DC Regulated Power Supply Module, 1 Output, 342W, Hybrid, HALF BRICK PACKAGE-9
MURATA
UHP-28.2/12-D48P
DC-DC Regulated Power Supply Module, 1 Output, 342W, Hybrid, HALF BRICK PACKAGE-9
MURATA
UHP-28.2/12-D48PB
DC-DC Regulated Power Supply Module, 1 Output, 342W, Hybrid, HALF BRICK PACKAGE-9
MURATA
©2020 ICPDF网 联系我们和版权申明