LCM-60DA [MEANWELL]
60W Multiple-Stage Output Current LED Power Supply; 60W多级输出电流LED驱动电源型号: | LCM-60DA |
厂家: | MEAN WELL ENTERPRISES CO., LTD. |
描述: | 60W Multiple-Stage Output Current LED Power Supply |
文件: | 总5页 (文件大小:214K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
60W Multiple-Stage Output Current LED Power Supply
LCM-60DA series
Features :
Output current level selectable by DIP S.W.
180~295VAC input only
Built-in active PFC function
Protections: Short circuit / Over voltage / Over temperature
Cooling by free air convection
Fully isolated plastic case
Class
power unit, no FG
Built-in DALI interface and push dimming function
Built-in 12V/50mA auxiliary output
Temperature compensation function by external NTC
No load power consumption <1.2W@AC always on
Power supplies synchronization function up to 10 units
Suitable for LED lighting applications
3 years warranty
110
F
M
M
SELV
SPECIFICATION
MODEL
LCM-60DA
SELECTABLE CURRENT Note.3 500mA
600mA
2 ~ 90V
700mA
2 ~ 86V
900mA
2 ~ 67V
1050mA
2 ~ 57V
1400mA
2 ~ 42V
DC VOLTAGE RANGE
2 ~ 90V
60.3W
5%
RATED POWER
RIPPLE CURRENT
OUTPUT
RIPPLE & NOISE (max.) Note.2 700mVp-p
NO LOAD OUTPUT VOLTAGE (max.) 95V
73V
CURRENT ACCURACY
SETUP, RISE TIME
5.0%
Note.6 1000ms, 80ms / 230VAC at rated power
HOLD UP TIME (Typ.)
VOLTAGE RANGE
16ms/230VAC at rated power
Note.4 180 ~ 295VAC
254 ~ 417VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
47 ~ 63Hz
PF 0.98/230VAC, PF 0.96/277VAC at rated power (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION Total harmonic distortion will be lower than 20% when output loading is 75% or higher
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT(Tye.)
LEAKAGE CURRENT
SHORT CIRCUIT
Note.7 92%
0.3A/230VAC
0.25A/277VAC
COLD START 35A/230VAC
<0.5mA / 240VAC
Constant current limiting, recovers automatically after fault condition is removed
105 ~ 125V
OVER VOLTAGE
Protection type : Shutdown o/p voltage, re-power on to recover
PROTECTION
FUNCTION
ENVIRONMENT
90
10 (RTH2)
OVER TEMPERATURE
Protection type : Shut down o/p voltage, re-power on to recover
12V @ 50mA for driving fan; Tolerance 5%
AUXILIARY POWER
TEMP. COMPENSATION
DIMMING
By external NTC(not provide with the power supply), please see "Temperature compensation operation"
Please see "Dimming Operation"
Please see "Synchronization Operation"
SYNCHRONIZATION
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-30 ~ +60 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
DALI STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
UL8750, ENEC EN61347-1, EN61347-2-13,EN62384 independent approved
IEC62386-101, 102, 207
SAFETY &
EMC
I/P-O/P:3.75KVAC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN61000-3-2 Class C( 35% rated power) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2KV), criteria A
EMC IMMUNITY
MTBF
K hrs min. MIL-HDBK-217F (25
)
OTHERS
NOTE
DIMENSION
123.5*81.5*23mm (L*W*H)
0.24Kg
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf parallel capacitor.
3. Please see "DIP switch table".
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. Efficiency is measured at 900mA/67V output set by DIP switch.
8. No load power consumption<1.2W is measured at 180 277VAC.
File Name:LCM-60DA-SPEC 2012-09-11
60W Multiple-Stage Output Current LED Power Supply
LCM-60DA series
Mechanical Specification
Case No.
Unit:mm
123.5
110
6.75
AC/L
6.75
AC/N
PUSH
DA+
DA-
TB3/TB4
1
SYN.
2
3
CN101
CN100
4
5
6
+
Vo
-
ON
1
2 3 4 5 6
39.3
65.5
7.8
7.8
2-
Terminal Pin No. Assignment(TB3/TB4) :
Pin No.
Assignment
+12Vaux.
-12Vaux.
+NTC
Pin No.
Assignment
1
2
3
4
5
6
-NTC
DIM+
DIM-
SYN. Connector(CN101/CN100):JST B2B-XH or equivalent
Pin No. Assignment
Mating Housing
Terminal
1,3
2,4
+
JST XHP
or equivalent
JST SXH-001T-P0.6
or equivalent
-
PFC fosc : 60KHz
PWM fosc : 80KHz
Block Diagram
+12Vaux
RECTIFIERS
RECTIFIERS
&
FILTER
EMI FILTER
&
RECTIFIERS
POWER
SWITCHING
PFC
+V
-V
I/P
CIRCUIT
DIM+
DIM-
O.L.P.
MCU
DETECTION
CIRCUIT
O.L.P.
O.T.P.
PFC
PWM
CONTROL
CONTROL
O.V.P.
Derating Curve
Static Characteristics
100
90
80
70
60
50
40
100
80
60
40
20
-30
-15
0
15
30
40
50
60
70
(HORIZONTAL)
180 190 200 210 220 230 240 250 260 270 280 295
AMBIENT TEMPERATURE (
)
INPUT VOLTAGE (V) 60Hz
File Name:LCM-60DA-SPEC 2012-09-11
60W Multiple-Stage Output Current LED Power Supply
LCM-60DA series
DIP Switch Table
LCM-60DA is a multiple-stage output current supply, selection of output current through DIP switch as table below.
DIP S.W.
1
2
3
4
5
6
Io
500mA
---- ---- ---- ---- ---- ----
ON ---- ---- ---- ---- ----
600mA
700mA(Factory Setting) ON ON ---- ---- ---- ----
900mA
ON ON ON ---- ---- ON
ON ON ON ON ---- ON
ON ON ON ON ON ON
1050mA
1400mA
Power Factor Characteristic
Constant Current Mode
Constant Current Mode
0.99
0.96
0.93
0.9
0.99
0.96
0.93
0.9
0.87
0.84
0.81
0.78
0.75
0.72
0.69
0.66
0.63
0.6
500
500
0.87
0.84
0.81
0.78
0.75
0.72
0.69
0.66
0.63
600
600
700
700
900
900
1050
1400
1050
1400
0.57
0.54
0.51
0.48
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
(230Vac Input)
LOAD
(277Vac Input)
EFFICIENCY vs LOAD
LCM-60DA series possess superior working efficiency that up to 92% can be reached in field applications.
95.0%
90.0%
85.0%
80.0%
75.0%
70.0%
65.0%
60.0%
55.0%
50.0%
95.0%
90.0%
85.0%
80.0%
75.0%
70.0%
65.0%
60.0%
55.0%
50.0%
45.0%
40.0%
500
500
600
600
700
700
900
900
1050
1400
1050
1400
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
(230Vac Input)
LOAD
(277Vac Input)
File Name:LCM-60DA-SPEC 2012-09-11
60W Multiple-Stage Output Current LED Power Supply
LCM-60DA series
DIMMING OPERATION
PUSH dim(primary side)
Ignore
To avoid reaction on AC spike
<0.05 sec.
0.1~1 sec.
1.5~10 sec.
>11 sec.
Short push Push to turn ON-OFF
Long push Dimming up or down
Reset push Setting light to 100%
Maximum number of drivers up to 10 pcs.
Maximum length of the cable, from push button to last driver is 15 meter.
Factory setting at 100%.
When the light is lower than 10% it will always dim up, or when the light output is higher than 90% it will always dim down.
DA-
DA+
LCM-60DA
Push Button
AC/N
AC/L
PUSH
AC/N
AC/L
Warning: The pushbutton can only be connected in between the PUSH terminal of LCM-60DA and AC/L (brown or black color). It would cause short circuit if
it is connected to AC/N.
DALI interface(primary side)
DALI protocol including 16 groups and 64 addresses.
First step is fixed at 1% light output.
SYNCHRONIZATION OPERATION
10 drivers(max.) synchronization (1 master + 9 slaves)
Maximum length of the cable from first driver to last driver is 15 meter.
SYN.
- -
SYN.
- -
SYN.
- -
LCM-60DA
(Slave 2)
LCM-60DA
(Master)
LCM-60DA
(Slave 1)
File Name:LCM-60DA-SPEC 2012-09-11
60W Multiple-Stage Output Current LED Power Supply
LCM-60DA series
TEMPERATURE COMPENSATION OPERATION
NTC derating curve
105
100
95
220KO
220K
330KO
330K
470K
470KO
90
85
80
75
70
65
55
60
65
70
75
80
85
90
95
Sensed Temperature(degree)
LCM-60DA have the built-in temperature compensation function (T , Io ). By connecting a temperature sensor (NTC resistor) between the NTC +/-
terminal of LCM-60DA and the detecting point on the lighting system or the surrounding environment, output current of LCM-60DA could be
correspondingly changed to ensure the long life of LED.
1.LCM-60DA can still be operated well when the NTC resistor is not connected and the value of output current will be the current level that you set
through the DIP switch.
2.
NTC resistance
220K
Output Current
< 60 , 100% of the rated current (corresponds to the setting current level)
> 60 , output current begin to reduce, details please refer to the curve.
< 70 , 100% of the rated current (corresponds to the setting current level)
> 70 , output current begin to reduce, details please refer to the curve.
330K
470K
< 80 , 100% of the rated current (corresponds to the setting current level)
> 80 , output current begin to reduce, details please refer to the curve.
Notes: 1. MW does not offer the NTC resistor and all the data above are measured by using THINKING TTC03 series.
2. If other brands of NTC resistor is applied,please check the temperature curve first.
3. Synchronization function of the power supply will be invalid when the" temperature compensation function" is in use.
File Name:LCM-60DA-SPEC 2012-09-11
相关型号:
LCM-E02002DTF-U
20X2 CHAR MODULE,TN,TRANS,SERIAL INPUT, EDGE LIT BLUE LED BACKLIGHT,1/17 DUTY,1/5
LUMEX
LCM-H00802DSF
5.56mm CHARACTER HEIGHT, 5x8 DOT MATRIX, 8x2, LCD MODULE, STN BLUE, YELLOW-GREEN LED BACKLIGHT
LUMEX
LCM-H01601DSF
6.56mm CHAR, HEIGHT, 5x8 dot MATRIX, 16x1 LCD MODULE, STN, TRANSFLECTIVE, WITH LED BACKLIGHT
LUMEX
©2020 ICPDF网 联系我们和版权申明