CS600 [MAXWELL]
Logic IC Output Optocoupler,;型号: | CS600 |
厂家: | MAXWELL TECHNOLOGIES |
描述: | Logic IC Output Optocoupler, 输出元件 光电 |
文件: | 总12页 (文件大小:396K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
ISOCOM LTD
IECQ
QC 88000-C004
ISSUE 4
COMPONENT
SPECIFICATION
May 2013
Component Specification
For
Ceramic Hermetically Sealed
High Gain Photon Optocouplers
M1077 IECQ
IECQ Product Certificate Number E1280/F
Up-to-date lists and bibliographical references of IECQ publications may be downloaded from www.iecq.org
Further copies of this document may be obtained from:
IEC
International Electrotechnical Commission
Commission Electrotechnique Internationale
Box 131, rue de Varembé, CH 1211 Geneva 20, Switzerland
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 1 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
FOREWORD
The IECQ Quality Assessment System for Electronic Components (IECQ) is composed of those member countries of
the International Electrotechnical Commission (IEC) who wish to take part in a harmonized system for electronic
components of assessed quality. IECQ is also known in some European member countries as IECQ-CECC.
The object of the System is to facilitate international trade by the harmonization of the specifications and quality
assessment procedures for electronic components, and by the grant of an internationally recognised Mark, or
Certificate of Conformity. The components produced or services provided under the system are thereby acceptable in
all member countries without further testing.
This Component Specification is based upon the requirements of IECQ 03-3, Annex E (QC 001002-2 Amendment 1,
Clause 5.4) and has been prepared by:
Isocom Ltd
48 Hutton Close
Crowther Industrial Estate
Washington
Tyne and Wear
NE38 0AH
United Kingdom
Tel:
Fax:
+44 0191 4166 546
+44 0191 4155 055
and published under the authority of:
BSI Group
Kitemark Court
Davy Avenue
Knowlhill
Milton Keynes
MK5 8PP
United Kingdom
AMENDMENT RECORD
Issue 1 – Changed Page 4 – Amendments 10/09/09
Issue 2 – Changed Pages 3, 4, 5 & 6 – RoHS Compliant, Added CSM169-2 & Amendments 13/07/10
Issue 3 – Changed Page 6 – Added 4/5 pin hybrid outline drawing, changed page 5, changed description of
16 pin DIP, changed page 4, added solder dip options and amended level options 30/5/13
REQUIREMENTS
The requirements for IECQ Component Specifications as detailed in IECQ 03-3, Annex E (QC 001002-2 Amendment
1, Clause 5.4) are satisfied by the following data sheet.
It should note that IECQ are not responsible for manufacturers declarations made in data sheets which fall outside the
limits of approved detailed in IECQ certificates.
This Component Specification is intended for use with applicable IECQ Assessment Specifications. Eg: QC 88000-
A0001
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 2 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
Ceramic Hermetically Sealed High Gain Photon
Optocouplers
■ 6N134
■ CD650/651
■ CH350
■ CSM169-2
■ CSM169-4
■ CSM1600
■ MC600
■ CS600
Features
Applications
▪ Release to IECQ
▪ Military, high reliability system
▪ Hermetically Sealed
▪ Medical instruments
▪ Mos, Cmos Applications
▪ Logic Interfacing
▪ High Density Packaging
▪ 1500V DC withstand Test Voltage
▪ Low Input Requirements
▪ High Current Transfer Ratio
▪ RoHS Compliant
▪ Data Transmission
▪ Transportation
Description
Each channel contains a light emitting diode which is optically coupled to an integrated high speed
photon detector. The output of the detector is an open collector Schottky clamped transistor.
Internal shields provide a guaranteed common mode transient immunity specification of 1000 V/µs.
These optocouplers are for Isolation Voltage applications requiring up to 2500 Vdc.
The optocoupler family is also available in various package styles including 6, 8 and 16 pin DIP
through hole, 16 pin surface mount DIP flat pack and a 6 Pin leadless ceramic chip carrier. The
devices can be purchased with lead bend and plating options.
ISOCOM optocouplers are offered on the basis of similarity of emitter and detector therefore the
performance characterization is identical, subject to the limitations of the packages. The wafer die
similarities apply to the optocouplers for high reliability screening and radiation testing.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 3 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
Selection Guide Package Styles and Configuration Options
6 pin
5 pin
Hybrid
Metal Can
TO-5
16 pin
Flat Pack
Package
6 Pad LCC
8 pin DIP
16 pin DIP
Lead Style
Channels
1
1
1
1/2
2
2/4
Common Channel Wiring
Isocom Part Numbers and Options
CD650/651
CS600
Commercial
CH350
CSM1600
MC600
6N134
CSM169
CD650/651/L2
CS600/L2
Defense Level
CH350/L2
CSM1600/L2
MC600/L2
6N134/L2
CSM169/L2
CD650/651/L2S
CS600/L2S
Space Level
CH350/L2S
CSM1600/L2S MC600/L2S
6N134/L2S CSM169/L2S
Gold Plate
Standard Gold Plate Finish
Solder Dipped
Gold Plate
Option 20
Gold Plate
Option 20
Option 10
Option 30
Option 60
Gold Plate
Option 20
Option 10
Option 30
Option 60
Gold Plate
Option 20
Option 20
Butt Cut/Gold Plate
Gull Wing/Soldered
Crew Cut/Gold Plate
Functional Diagrams
CH350
5 pin Hybrid
1 Channel
CSM1600
6 pad LCC
1 Channel
MC600
6 pin Metal
Can
CD650/651
8 pin DIP
6N134
16 pin DIP
2 Channel
CSM169-2
16 pin Flat Pack
2 Channel
1 Channel
2 Channel
6
1
2
5
4
3
5
7
3
2
1
CS600
8 pin DIP
1 Channel
CSM169-4
16 pin Flat Pack
4 Channel
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 4 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
Outline Drawings
16 pin DIP
16 pin Flat Pack, 2 and 4 Channel
NOTE: DIMENSIONS IN
MILLIMETERS
6 pin TO-5, 1 Channel
6 LEADS
0.0175 (0.445)
0.040(1.02)
5
0.32 (8.13)
6
0.037 (0.935)
3
0.022 (5.08)
7
2
1
0.5 (12.70)
0.17 (4.32)
0.031 (0.787)
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 5 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
8 pin DIP 1 and 2 Channel
6 Terminal LCC Surface Mount, 1 Channel
1.651
2.286
6.223
5
4
3
6
1
2
0.635
1.27
2.54
1.67
4.318
CSM1600
0.762
R = .2286
0.635
4/5 Terminal Hybrid, 1 Channel
3.5
0.6
4.5
0.13
0.13
+0.2
+0.2
2.0
0.7
0.6
0.6
Device Marking
Isocom Part Number
Manufacturer
XXXXXXX
ISOCOM
XXXX
Date Code (XX year XX week)
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 6 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
Hermetic Optocoupler Options
Option Description
10
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial hi-rel product in 8 and 16 pin DIP
20
30
Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is
available on commercial and hi-rel product in 8 and 16 pin DIP.
60
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is
available on commercial hi-rel product in 8 and 16 pin DIP
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 7 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
Absolute Maximum Ratings
Storage Temperature
-65°C to +150°C
Operating Temperature
Lead Soldering Temperature
-55°C to +125°C
260C for 10S, 1.6mm below seating plane where appropriate
Input Diode
Peak Forward Current
Average Forward Current
Reverse Voltage
40mA
20mA
5V
IF ( 1 mS duration)
IF
VR
Power Dissipation
35mW
Output Detector
Supply Voltage
Current
Collector Power Dissipation
Voltage
7V
VCC (1minute maximum)
IO
25mA
40mW
7V
VO (See note 1)
Single Channel Schematic
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 8 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
Electrical Characteristics
TA = -55°C to +125°C U.O.S.
All typical values at VCC = 5V, TA = 25°C (each channel where appropriate).
Parameter
Symbol Test Conditions
Device Min
Type
Max
Units
High Level Output
Current
IOH
IF = 250µA,
VO = VCC = 5.5V
-
20
250
µA
(See note 1)
Lower Level Output
Voltage
VOL
IF = 10mA, VCC = 5.5V,
IOL(sinking) = 10mA
-
0.4
0.6
V
(See notes 1 & 9)
IF = 5mA, VCC = 5.5V,
IOL(sinking) = 13mA
VCC = 5.5V, IF1 = IF2 = 0
CD650
-
High Level Supply
Current
Low Level Supply Current ICCL
ICCH
15
30
mA
mA
VCC = 5.5V, IF1 = IF2 = 10mA
CS600
CD650
CD651
CH350
6N134
-
15
20
19
38
VCC = 5.5V, IF1 = IF2 = 13mA
VCC = 5.5V, IF1 = IF2 = 20mA
RH = 45%, TA = 25°C, t = 5S
VIO = 1500Vdc
36
36
1.0
Input-Output Insulation
Leakage Current
II-O
-
-
µA
(See notes 2 & 10)
Input Forward Voltage
(See note 1)
Input Reverse Breakdown BVR
Voltage
VF
IF = 10mA, TA = 25°C
IF = 20mA
IR = 10µA, TA = 25°C
-
-
5
1.5
-
-
1.9
1.9
-
V
V
(See note 1)
Propagation Delay Time tPLH
to High Output Level
See notes 1 & 5)
RL = 510Ω, IF = 13mA,
TA = 25°C, CL = 50pF
RL = 510Ω, IF = 13mA,
TA = 25°C, CL = 15pF
6N134
-
-
-
100
90
nS
6N134
CD651
CH350
CS600
60
200
75
RL = 350Ω, IF = 7.5mA,
TA = 25°C, CL = 15pF
Propagation Delay Time tPHL
to Low Output Level
(See notes 1 & 6)
RL = 510Ω, IF = 13mA,
TA = 25°C, CL = 50pF
RL = 510Ω, IF = 13mA,
TA = 25°C, CL = 15pF
RL = 510Ω, IF = 13mA,
TA = 25°C, CL = 15pF
RL = 350Ω, IF = 7.5mA,
TA = 25°C, CL = 15pF
6N134
-
-
-
100
90
nS
6N134
CD651
CH350
55
200
100
-
CS600
CD650
Current Transfer Ratio
(See note 1)
CTR
IF = 10mA, VO = 0.6V, VCC = 5.5V
IF = 5mA, VO = 0.6V, VCC = 5.5V
100
-
%
CS600 100
CD650
300
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 9 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
Typical Characteristics
TA = 25°C, VCC = 5V each channel where appropriate
Parameter
Symbol Test Conditions
Note Min
s
Type
Max
Units
Input Diode Temperature
Coefficient
IF = 20mA
1
-
-1.9
-
mV/°C
VF
TA
RI-O
CI-O
CIN
II-I
Resistance
Capacitance
Input Capacitance
Input-Input Leakage
Current
Resistance
Capacitance
Output Rise (10-90%)
Output Fall Time (90-
10%)
V10 = 500V
f = 1MHz
f = 1MHz, VF = 0
45% Relative Humidity
VII = 500Vdc, t = 5S
VII = 500Vdc
f = 1MHz
RL = 510Ω, CL = 15pF, IF = 13mA
RL = 510Ω, CL = 15pF, IF = 13mA
3
3
1
4
-
-
-
-
1012
1.9
60
-
-
-
-
Ω
pF
pF
nA
0.5
RI-I
CI-I
tr
4
4
1
1
-
-
-
-
1012
0.6
35
-
-
-
-
Ω
pF
nS
nS
tf
35
Common Mode Transient CMH
Immunity at Logic High
Output Level
Common Mode Transient CML
Immunity at Logic Low
Output Level
VO (min) = 2V, VCM = 10V (peak)
RL = 510Ω, IF = 0mA
1 & 7
-
-
1000
-
-
V/µS
V/µS
VO(max) = 0.8V, VCM = 10V (peak) 1 & 8
RL = 510Ω, IF = 10mA
-1000
Notes: (Apply typically to 16 pin package)
1. Each channel, where appropriate.
2. Measured between pins 1 through 4 shorted together, and pins 9 through 16 shorted together.
3. Measured between pins 1 and 2, or 5 and 6 shorted together, and pins 9 through 16 shorted together.
4. Measured between pins 1 and 2 shorted together, and pins 5 and 6 shorted together.
5. The tPLH propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point
on the trailing edge of the output pulse.
6. The tPHL propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point
on the leading edge of the output pulse.
7. CMH is the maximum tolerable common mode transient to assure that the output will remain in a high logic state (i.e.,
VO > 2.0V).
8. CML is the maximum tolerable common mode transient to assure that the output will remain in the logic low state
(i.e., VO < 2.0V).
9. It is essential that a bypass capacitor (0.1 to 0.1µF, ceramic) be connected from pin 10 to pin 15. Total lead length
between both ends of the capacitor and the isolator pins should not exceed 20mm.
10. This is a momentary withstand test, not an operating condition.
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 10 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
Electrical Characteristics
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 11 of 12
QC 88000-C004: 2013
®
ISOCOM LTD
For sales enquiries, or further information, please contact our sales office at:
Isocom Ltd, 48, Hutton Close, Crowther Industrial Estate, Washington, Tyne and Wear, UK, NE38 0AH
Tel: +44 0191 4166 546 Fax: +44 0191 4155 055
©2007 Copyright reserved to Isocom Limited
Page 12 of 12
QC 88000-C004: 2013
相关型号:
©2020 ICPDF网 联系我们和版权申明